4.6 Article

In-situ Lithiated SiO2 as Lithium-Free Anode for Lithium-Sulfur Batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

MnCo2O4 Spiny Microspheres as Polysulfide Anchors and Conversion Catalysts for High-Performance Li-S Batteries

Jeevanantham Sivaraj et al.

Summary: This study uses MnCo2O4 microspheres as polysulfide anchors and conversion catalysts to improve the performance of Li-S batteries, addressing challenges such as poor conductivity of sulfur, polysulfide shuttle effect, poor cycle life, and sluggish reaction kinetics.

ENERGY & FUELS (2022)

Article Materials Science, Multidisciplinary

Boron heteroatom-doped silicon-carbon peanut-like composites enables long life lithium-ion batteries

Fang-Zhou Zhang et al.

Summary: A novel peanut-like structure of B-doped silicon/carbon nanoparticle (Si@B-C) synthesized by sol-gel process exhibits superior electrochemical performance, attributed to the unique peanut-like structure.

RARE METALS (2022)

Article Engineering, Environmental

LiF-rich and self-repairing interface induced by MgF2 engineered separator enables dendrite-free lithium metal batteries

Liwen Tan et al.

Summary: A facile and low-cost strategy of coating MgF2 onto a commercial polyethylene separator is proposed to enable dendrite-free and long-life lithium metal batteries. The MgF2 coating can react with Li metal to form an artificial solid electrolyte interface (SEI) layer, and a small amount of dissolved MgF2 can repair cracks in the SEI layer. This design protects the Li metal anode, reduces nucleation overpotential, promotes smooth Li plating, and inhibits dendrite growth.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Multidisciplinary Sciences

Boron doping-induced interconnected assembly approach for mesoporous silicon oxycarbide architecture

Guanjia Zhu et al.

Summary: A novel boron doping-induced interconnection-assembly approach was reported for fabricating mesoporous silicon oxycarbide nanospheres, featuring interconnected and strongly coupled nanospheres with coarse surfaces. The architecture offers tunable interconnection size, surface roughness, and switchable primary nanoparticles, demonstrating dual stable characteristics for long-term cycle life in lithium-ion battery anode applications.

NATIONAL SCIENCE REVIEW (2021)

Article Engineering, Environmental

Surface modification of Ni foam for stable and dendrite-free lithium deposition

Qiang Zhang et al.

Summary: A 3D porous lithiophilic host was prepared to regulate lithium deposition and suppress dendrite growth, demonstrating excellent electrochemical performance in both symmetric cells and full cells.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Boron-iron nanochains for selective electrocatalytic reduction of nitrate

Fanfan Ni et al.

Summary: Boron-iron nanochains (B-Fe NCs) serve as efficient catalysts for nitrate reduction reaction (NRR) with unique advantages in optimizing NRR catalytic performance, showing promising potential for broad applications.

CHINESE CHEMICAL LETTERS (2021)

Article Energy & Fuels

Facile Approach To Prepare Multiple Heteroatom-Doped Carbon Material from Bagasse and Its Applications toward Lithium-Ion and Lithium-Sulfur Batteries

Dasari Bosubabu et al.

Summary: The research demonstrates that using low-cost multi-heteroatom co-doped carbon (NSOC-10) in both Li-ion and Li-S batteries can enhance cyclic stability and electrochemical performance, attributed to the highly porous carbon matrix.

ENERGY & FUELS (2021)

Article Nanoscience & Nanotechnology

Surface Engineering of a Mg Electrode via a New Additive to Reduce Overpotential

Zhen Meng et al.

Summary: In nonaqueous Mg batteries, adding bismuth triflate (Bi(OTf)(3)) can enhance the Mg plating/stripping process by reducing the impact of adsorbed species on the Mg surface and increasing the resistance to passivation through the formation of Bi/Mg3Bi2 on the Mg metal surface.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Mitigating self-discharge and improving the performance of Mg-S battery in Mg[B(hfip)4]2 electrolyte with a protective interlayer

Dasari Bosubabu et al.

Summary: The research on magnesium-sulfur (Mg-S) battery has revealed that the spontaneous formation of magnesium polysulfide leads to severe self-discharge, but using graphene-polyaniline coated carbon cloth as a protective interlayer can effectively adsorb the polysulfide and inhibit the self-discharge, thereby improving the performance of the battery.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Multidisciplinary

Lithiophilic Silver Coating on Lithium Metal Surface for Inhibiting Lithium Dendrites

Zefu Zuo et al.

FRONTIERS IN CHEMISTRY (2020)

Review Chemistry, Multidisciplinary

A review for modified Li composite anode: Principle, preparation and challenge

Xinxia Yang et al.

NANOTECHNOLOGY REVIEWS (2020)

Review Chemistry, Multidisciplinary

Towards practical lithium-metal anodes

Xin Zhang et al.

CHEMICAL SOCIETY REVIEWS (2020)

Article Chemistry, Analytical

MoS2 anchored carbon nitride based mesoporous material as a polysulfide barrier for high capacity lithium-sulfur battery

Gnanavel Angamuthu et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2019)

Article Chemistry, Physical

Low-volume-change, dendrite-free lithium metal anodes enabled by lithophilic 3D matrix with LiF-enriched surface

Yangyang Feng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Electrochemistry

Review-Li Metal Anode in Working Lithium-Sulfur Batteries

Xin-Bing Cheng et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Article Nanoscience & Nanotechnology

Permselective SPEEK/Nafion Composite-Coated Separator as a Potential Polysulfide Crossover Barrier Layer for Li-S Batteries

Dasari Bosu Babu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Review Chemistry, Multidisciplinary

Electrolyte Additives for Lithium Metal Anodes and Rechargeable Lithium Metal Batteries: Progress and Perspectives

Heng Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Multidisciplinary Sciences

Structural absorption by barbule microstructures of super black bird of paradise feathers

Dakota E. McCoy et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Effects of Polymer Coatings on Electrodeposited Lithium Metal

Jeffrey Lopez et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Review Electrochemistry

Toward Better Lithium-Sulfur Batteries: Functional Non-aqueous Liquid Electrolytes

Shizhao Xiong et al.

ELECTROCHEMICAL ENERGY REVIEWS (2018)

Article Chemistry, Physical

Direct growth of 3D host on Cu foil for stable lithium metal anode

Fei Shen et al.

ENERGY STORAGE MATERIALS (2018)

Article Chemistry, Physical

Dendrite-Suppressed Lithium Plating from a Liquid Electrolyte via Wetting of Li3N

Kyusung Park et al.

ADVANCED ENERGY MATERIALS (2017)

Review Chemistry, Multidisciplinary

Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review

Xin-Bing Cheng et al.

CHEMICAL REVIEWS (2017)

Article Chemistry, Multidisciplinary

3D Porous Cu Current Collector/Li-Metal Composite Anode for Stable Lithium-Metal Batteries

Qi Li et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Article Multidisciplinary Sciences

Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating

Zheng Liang et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Article Electrochemistry

The Effect of Interactions and Reduction Products of LiNO3, the Anti-Shuttle Agent, in Li-S Battery Systems

Ariel Rosenman et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Article Chemistry, Physical

A lithium-sulfur full cell with ultralong cycle life: influence of cathode structure and polysulfide additive

Soeren Thieme et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Multidisciplinary Sciences

Defect-induced plating of lithium metal within porous graphene networks

Rahul Mukherjee et al.

NATURE COMMUNICATIONS (2014)

Article Chemistry, Analytical

Lithium phosphorous oxynitride as a passive layer for anodes in lithium secondary batteries

K Chung et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2004)