☆ 4.6 Article

Integrated multi-material portable 3D-printed platform for electrochemical detection of dopamine and glucose

ANALYST (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Analytical

Comparing electrochemical pre-treated 3D printed native and mechanically polished electrode surfaces for analytical sensing

Ricoveer Singh Shergill et al.

Summary: The manufacturing approach and electrode preparation method have a significant impact on the performance of electrochemical sensors, with variations in sensitivity and response observed depending on whether the electrodes were made using a printer or a pen, and whether they were polished or used as printed.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Analytical

Electrochemical (Bio)Sensors Enabled by Fused Deposition Modeling-Based 3D Printing: A Guide to Selecting Designs, Printing Parameters, and Post-Treatment Protocols

Jessica Santos Stefano et al.

Summary: 3D printing technology has great potential in electroanalysis, allowing for quick and flexible production of various shapes and sizes of electrochemical systems and electrodes. Care must be taken when using FDM 3D printers to ensure quality and sealing.

ANALYTICAL CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Analytical

Characterising the response of novel 3D printed CNT electrodes to the virulence factor pyocyanin

Caitlin McLean et al.

Summary: Electrochemical based sensors, particularly those using carbon nanotube electrodes, have shown great potential for biomedical applications due to their low cost, high conductivity and sensitivity in detecting biomarkers. This study demonstrated the feasibility of using 3D printed carbon nanotube electrodes for the detection of pyocyanin, a diagnostic biomarker for Pseudomonas aeruginosa, with comparable performance to traditional electrode systems.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Bioinspired 3D Printable, Self-Healable, and Stretchable Hydrogels with Multiple Conductivities for Skin-like Wearable Strain Sensors

Jingjiang Wei et al.

Summary: Bioinspired hydrogels with self-healing ability, stretchability, 3D printability, and multiple conductivities can serve as integrated strain sensors, exhibiting sensitive responses to subtle pressure changes in the human body.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Development of FBG pressure sensors using FDM technique for monitoring sleeping postures

Zamir Ahmed Abro et al.

Summary: In this research, FBG-based pressure sensors were fabricated using FDM technology and PLA raw material for monitoring sleeping postures. Calibration tests validated the performance of the sensors through loading and unloading tests, showing measurement sensitivity and errors under different loads. The study showed that FDM is a new alternative method for embedding FBG sensors quickly and easily for various applications.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

添加到收藏夹

Article Chemistry, Analytical

Reactive oxygen plasma treatment of 3D-printed carbon electrodes towards high-performance electrochemical sensors

Jian F. S. Pereira et al.

Summary: The study presents a rapid and chemical-free protocol for the surface treatment of 3D-printed conductive electrodes to enhance electrochemical activity, achieved by increasing oxide and graphitic groups through oxygen plasma treatment. This method significantly improves sensitivity and detection limit for electrochemical sensing of molecules, showing great promise for sensitive electrochemical sensors.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

添加到收藏夹

Article Biophysics

DEPIS: A combined dielectrophoresis and impedance spectroscopy platform for rapid cell viability and antimicrobial susceptibility analysis

Pragya Swami et al.

Summary: Antimicrobial resistance (AMR) is caused by inappropriate or excessive antibiotic consumption. Early diagnosis of bacterial infections can greatly curb empirical treatment and thus AMR. The authors introduce a real-time, label-free approach called DEPIS that combines dielectrophoresis for bacterial enrichment and impedance spectroscopy for cell viability analysis in under 60 minutes. This rapid cell analyses approach can aid in faster diagnosis of bacterial infections and benefit the clinical decision-making process for antibiotic treatment, addressing the critical issue of AMR.

BIOSENSORS & BIOELECTRONICS (2021)

添加到收藏夹

Article Electrochemistry

3D-printed hybrid-carbon-based electrodes for electroanalytical sensing applications

Jesus E. Contreras-Naranjo et al.

Summary: This work introduces miniaturized, fully integrated, 3D-printed, hybrid-carbon electrodes fabricated using a Fused Deposition Modeling 3D-printer, marking the first use of a CNT/CB/PLA filament material in an electrochemical sensing system. The hybrid-carbon electrode consists of a non-conductive ABS substrate and a CNT/CB/PLA three-electrode array, activated through a cost-effective two-step process and demonstrated to detect dopamine. The simplicity, portability, low cost, and rapid fabrication of these electrodes suggest their potential for true point-of-care 3D-printed electrochemical sensing systems, paving the way for the development of new PLA filaments for improved performance.

ELECTROCHEMISTRY COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Analytical

All-in-One Single-Print Additively Manufactured Electroanalytical Sensing Platforms

Robert D. Crapnell et al.

Summary: This study presents a fully additively manufactured electrochemical cell that is printed as one piece without the need for post-assembly or external electrodes. The cell demonstrates successful detection of ascorbic acid and acetaminophen, showcasing potential for impact in various research areas.

ACS MEASUREMENT SCIENCE AU (2021)

添加到收藏夹

Article Chemistry, Analytical

3D printed smart silk wearable sensors

Tianshu Chu et al.

Summary: Wearable silk sensors, with electronic and microchannel capabilities, have been developed for sensitive sensing of cancer markers and motion monitoring. These sensors, made from composite silk films, demonstrate excellent properties and biocompatibility, indicating their potential for broader applications in various fields such as point-of-care testing and artificial organs.

ANALYST (2021)

添加到收藏夹

Article Chemistry, Analytical

3D-Printed graphene/polylactic acid electrode for bioanalysis: Biosensing of glucose and simultaneous determination of uric acid and nitrite in biological fluids

Rafael M. Cardoso et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

添加到收藏夹

Article Chemistry, Analytical

Miniature 3D-printed integrated electrochemical cell for trace voltammetric Hg(II) determination

Vassiliki Katseli et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

添加到收藏夹

Article Chemistry, Analytical

Production of 3D-printed disposable electrochemical sensors for glucose detection using a conductive filament modified with nickel microparticles

Raquel G. Rocha et al.

ANALYTICA CHIMICA ACTA (2020)

添加到收藏夹

Article Materials Science, Biomaterials

Electronic tongue and cyclic voltammetric sensors based on carbon nanotube/polylactic composites fabricated by fused deposition modelling 3D printing

Jedsada Junpha et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

添加到收藏夹

Article Electrochemistry

Augmentation of conductive pathways in carbon black/PLA 3D-printed electrodes achieved through varying printing parameters

A. Abdalla et al.

ELECTROCHIMICA ACTA (2020)

添加到收藏夹

Review Chemistry, Analytical

3D-printed biosensors for electrochemical and optical applications

Jose Munoz et al.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Analytical

3D Pen: A low-cost and portable tool for manufacture of 3D-printed sensors

Fabiano M. de Oliveira et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

3D-Printed electrochemical sensor-integrated transwell systems

Pradeep Ramiah Rajasekaran et al.

MICROSYSTEMS & NANOENGINEERING (2020)

添加到收藏夹

Review Chemistry, Physical

Toward single-step production of functional electrochemical devices using 3D printing: Progress, challenges, and opportunities

Glen D. O'Neil

CURRENT OPINION IN ELECTROCHEMISTRY (2020)

添加到收藏夹

Article Electrochemistry

Single-step fabrication of electrochemical flow cells utilizing multi-material 3D printing

Glen D. O'Neil et al.

ELECTROCHEMISTRY COMMUNICATIONS (2019)

添加到收藏夹

Article Chemistry, Analytical

Three-Dimensional-Printed Electrochemical Sensor for Simultaneous Dual Monitoring of Serotonin Overflow and Circular Muscle Contraction

H. H. Hamzah et al.

ANALYTICAL CHEMISTRY (2019)

添加到收藏夹

Article Chemistry, Analytical

Complete Additively Manufactured (3D-Printed) Electrochemical Sensing Platform

Eduardo M. Richter et al.

ANALYTICAL CHEMISTRY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D-Printed Coaxial Fibers for Integrated Wearable Sensor Skin

Yang Gao et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

添加到收藏夹

Article Chemistry, Analytical

3D printing for electroanalysis: From multiuse electrochemical cells to sensors

Rafael M. Cardoso et al.

ANALYTICA CHIMICA ACTA (2018)

添加到收藏夹

Article Chemistry, Analytical

3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis

C. Lorena Manzanares Palenzuela et al.

ANALYTICAL CHEMISTRY (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Development of a glucose sensor employing quick and easy modification method with mediator for altering electron acceptor preference

Mika Hatada et al.

BIOELECTROCHEMISTRY (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Engineered fungus derived FAD-dependent glucose dehydrogenase with acquired ability to utilize hexaammineruthenium(III) as an electron acceptor

Madoka Okurita et al.

BIOELECTROCHEMISTRY (2018)

添加到收藏夹

Article Engineering, Mechanical

PLA conductive filament for 3D printed smart sensing applications

Simone Luigi Marasso et al.

RAPID PROTOTYPING JOURNAL (2018)

添加到收藏夹

Article Chemistry, Analytical

Vapor sensing performance as a diagnosis probe to estimate the distribution of multi-walled carbon nanotubes in poly(lactic acid)/polypropylene conductive composites

Yilong Li et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nonenzymatic Wearable Sensor for Electrochemical Analysis of Perspiration Glucose

Xiaofei Zhu et al.

ACS SENSORS (2018)

添加到收藏夹

Article Chemistry, Analytical

Mediator Preference of Two Different FAD-Dependent Glucose Dehydrogenases Employed in Disposable Enzyme Glucose Sensors

Noya Loew et al.

SENSORS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printed Earable Smart Devices for Real-Time Detection of Core Body Temperature

Hiroki Ota et al.

ACS SENSORS (2017)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.