☆ 4.6 Article

Synergistic effects of CNTs/SiO2 composite fillers on mechanical properties of cement composites

RSC ADVANCES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Understanding the role of unzipped carbon nanotubes in cement pastes

Dong Lu et al.

Summary: Carbon nanotubes (CNTs) and graphene oxide (GO) are commonly used carbon-based materials for modifying cementitious materials. This study discovered that unzipped carbon nanotubes (UCNTs) can significantly enhance the compressive and flexural strengths of cement paste, outperforming CNTs and GO. The outstanding reinforcement efficiency of UCNTs is attributed to their abundant surface chemistry similar to GO, as well as their one-dimensionality and bending stiffness similar to pristine CNTs.

CEMENT & CONCRETE COMPOSITES (2022)

添加到收藏夹

Article Construction & Building Technology

Experimental investigation on sing fiber pullout behaviour on steel fiber-matrix of reactive powder concrete (RPC)

Lian Huang et al.

Summary: A new single fiber pullout testing method was applied to study the interfacial bond performance between steel fiber and matrix in reactive powder concrete. Results showed that factors such as fiber type, embedment angle, and silica fume content influenced the bond strength, with end-hooked steel fiber exhibiting higher strength. Incorporating silica fume improved matrix strength, and appropriate curing age and magnetic nanoparticles enhanced pullout behavior.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Behavior and design of nano/micro-scale carbon modified multifunctional cementitious composites

Chun Pei et al.

Summary: This work introduces a novel design concept for nano/micro-scale carbon modified multifunctional cementitious composites, leveraging the advantages of graphene/PVA nanofluid additive to enhance mechanical properties and electrical conductivity while maintaining or even improving mechanical strengths under low resistivity.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Electrochemistry

Poly-dopamine carbon-coated stable silicon/graphene/CNT composite as anode for lithium ion batteries

Fangfang Wang et al.

Summary: A 3D carbon-coated stable silicon/graphene/carbon nanotubes composite was prepared to buffer the volume expansion of silicon during charge-discharge process. The composite exhibited excellent electrochemical performance due to its stable hierarchical structure.

ELECTROCHIMICA ACTA (2022)

添加到收藏夹

Article Construction & Building Technology

Synergistic effects of carbon black and steel fibers on electromagnetic wave shielding and mechanical properties of graphite/cement composites

Tiantian Si et al.

Summary: The study aimed to develop a broadband and high-efficiency electromagnetic shielding cement composites by utilizing different conductive fillers. Through the addition of carbon black and steel fibers, the shielding properties of the cement composite were significantly enhanced while meeting the requirements of conventional engineering applications.

JOURNAL OF BUILDING ENGINEERING (2022)

添加到收藏夹

Article Construction & Building Technology

Pore structure characteristics of concrete composites with surface-modified carbon nanotubes

Jialiang Wang et al.

Summary: This study demonstrates that the surface-modified CNTs can reduce the pore content and size of RPC composites, thereby modifying their pore structure characteristics. Different types of CNTs have varying effects on the pore structure, with hydroxyl functionalized and nickel-coated CNTs causing the shrinkage of gel structure, while carboxyl functionalized CNTs inducing the transformation of nano-scale pores inside the gel. The effects of surface-modified CNTs on the pore structure of RPC composites are primarily on the nano- and micrometer scale.

CEMENT & CONCRETE COMPOSITES (2022)

添加到收藏夹

Article Construction & Building Technology

An experimental and numerical study on the age depended bond-slip behavior between nano-silica modified carbon fibers and cementitious matrices

Huanyu Li et al.

Summary: Electrophoretic deposition of nano-silica on carbon fiber surfaces is demonstrated as an effective approach for improving the interfacial bond properties between the fibers and cementitious matrices. Experimental results show that the interfacial adhesion at the fiber-matrix interface significantly improves with curing time, attributed to the formation of C-S-H gel near the fiber surface. Additionally, a finite element model incorporating a discrete cohesive concept successfully captures the experimental pullout behavior.

CEMENT & CONCRETE COMPOSITES (2022)

添加到收藏夹

Review Construction & Building Technology

Effective strategies to realize high-performance graphene-reinforced cement composites

Felipe Basquiroto de Souza et al.

Summary: Due to their special properties, graphene-based nanosheets (GNS) have the potential to be used in the production of high-performance and sustainable cement composites. This review focuses on the recent advancements in GNS-reinforced cementitious composites, specifically the strategies used to effectively incorporate GNS into cement/concrete mixes (such as dispersion, hybridization, coating, and dry mixing approaches). The impacts of GNS-reinforcement on the mechanical, durability, and functional performance of cementitious materials are also analyzed. Additionally, the increasing understanding of the distribution and interplay of GNS within the complex cement microstructure is highlighted, with the aim of confidently translating GNS into the construction industry.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Review Construction & Building Technology

A review of graphene oxide/cement composites: Performance, functionality, mechanisms, and prospects

Yuxia Suo et al.

Summary: This study summarises the hot topics and research trends of graphene oxide/cement composites (GO/CCs) using bibliometric methods. It reviews the effects of GO/CCs on mechanical performance, transport properties, self-sensing performance, and enhancing mechanisms. Previous studies have shown that the uniform dispersion of GO can significantly improve the strength and resistance of cement composites. Future research should investigate the self-sensing and long-term service performance of GO/CCs under various environmental factors.

JOURNAL OF BUILDING ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Ceramics

Influence of modified multi-walled carbon nanotubes on the mechanical behavior and toughening mechanism of an environmentally friendly granulated blast furnace slag-based geopolymer matrix

Faping Li et al.

Summary: The study showed that the incorporation of 0.1% functionalized MWCNTs had the optimal influence on fluidity and mechanical behavior. Geopolymers with 0.1% functionalized MWCNTs experienced increased slump diameters and improved compressive and bending strengths compared to the reference geopolymer matrix.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Functionalization as a way to enhance dispersion of carbon nanotubes in matrices: a review

L. Lavagna et al.

Summary: Three decades of scientific scrutiny on carbon nanotubes (CNTs) have shown that challenges in handling and dispersing CNTs, as well as their limited interaction with other materials due to their structure, can impact technological applications. A thorough understanding of CNT properties and selecting appropriate dispersion procedures are essential for achieving desired nanocomposite properties. Advanced knowledge on CNT synthesis, functionalization methods, and dispersion techniques is crucial for addressing these challenges.

MATERIALS TODAY CHEMISTRY (2021)

添加到收藏夹

Article Construction & Building Technology

Roles of hybrid activators in improving the early-age properties of one-part geopolymer pastes

Yan-Shuai Wang et al.

Summary: The study aims to tailor the early-age properties of one-part fly ash/ground granulated blast-furnace slag geopolymer by using hybrid activators, including anhydrous sodium metasilicate, sodium carbonate, and sodium aluminate. The experimental results showed that Na2SiO3-activated geopolymer had faster setting, which could be improved by partial replacement with Na2CO3.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Review Construction & Building Technology

Effect of nanomaterials inclusion on sustainability of cement-based concretes: A comprehensive review

Ali M. Onaizi et al.

Summary: The negative effects of CO2 emissions due to rapid development in several countries have raised concerns for sustainable growth, leading to challenges in producing less clinker-based modified concretes with lower CO2 emission levels. Various nanomaterials incorporated concretes are being explored for their potential to achieve sustainability objectives in the civil engineering field. A comprehensive sustainability assessment was made on diverse nanomaterials included cement-based concretes, focusing on their impact on strength characteristics, workability, durability performance, as well as the pros and cons for environmental sustainability.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Effects of nano-SiO2 and nano-Al2O3 on mechanical and durability properties of cement-based materials: A comparative study

Ai Zhang et al.

Summary: The addition of nano materials NS and NA can improve the mechanical and durability properties of cement-based materials. In particular, there is a higher compressive strength growth rate in mortars as the NS content increases. Additionally, the capillary permeability coefficient of cement-based materials can be reduced by adding small amounts of NS and NA.

JOURNAL OF BUILDING ENGINEERING (2021)

添加到收藏夹

Article Construction & Building Technology

Microstructural changes and mechanical performance of cement composites reinforced with recycled carbon fibers

Arslan Akbar et al.

Summary: The study demonstrates that the addition of RCFs can promote the growth of hydration products in cement composites, leading to increased strength without the need for additional chemical reactions.

CEMENT & CONCRETE COMPOSITES (2021)

添加到收藏夹

Article Construction & Building Technology

Micro-cracking pattern recognition of hybrid CNTs/GNPs cement pastes under three-point bending loading using acoustic emission technique

Jie Xu et al.

Summary: The study investigated the fracture phenomena and micro-cracking behavior of hybrid carbon nanotubes and graphene nanoplatelets cement composites using acoustic emission technique, and found that the combination of CNTs and GNPs can shift the failure mode in cement composites and exhibit more ductile behavior. The dispersion level and microstructure properties analysis helped to observe the cracking pattern and failure mechanism of the specimens into different stages.

JOURNAL OF BUILDING ENGINEERING (2021)

添加到收藏夹

Article Construction & Building Technology

Effect and mechanism analysis of functionalized multi-walled carbon nanotubes (MWCNTs) on C-S-H gel

Yue Li et al.

CEMENT AND CONCRETE RESEARCH (2020)

添加到收藏夹

Review Engineering, Multidisciplinary

Discontinuous micro-fibers as intrinsic reinforcement for ductile Engineered Cementitious Composites (ECC)

Duo Zhang et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Effects of brass coating and nano-SiO2 coating on steel fiber-matrix interfacial properties of cement-based composite

Zhenyu Pi et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

Effect of nano-CaCO3 and nano-SiO2 on improving the properties of carbon fibre-reinforced concrete and their pore-structure models

Rui Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Molecular dynamics simulations for evaluation of surfactant compatibility and mechanical characteristics of carbon nanotubes incorporated cementitious composite

B. S. Sindu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Review Construction & Building Technology

Effect of carbon nanotubes on compressive, flexural and tensile strengths of Portland cement-based materials: A systematic literature review

Laura Silvestro et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Multi-walled carbon nanotubes with different features reinforced cement pastes: A compressive and systematic approach using principal component analysis

Baris Simsek

JOURNAL OF BUILDING ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

Dispersion and reinforcement efficiency of carbon nanotubes in cementitious composites

Hawreen Ahmed et al.

MAGAZINE OF CONCRETE RESEARCH (2019)

添加到收藏夹

Article Construction & Building Technology

Barriers to achieving highly dispersed graphene oxide in cementitious composites: An experimental and computational study

A. M. Sabziparvar et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Influence of fiber mixture on impact response of ultra-high-performance hybrid fiber reinforced cementitious composite

Jun Feng et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Grafting SiO2 nanoparticles on polyvinyl alcohol fibers to enhance the interfacial bonding strength with cement

Wei Zhang et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Construction & Building Technology

Modeling the mechanical properties of cementitious materials containing CNTs

Mahyar Ramezani et al.

CEMENT & CONCRETE COMPOSITES (2019)

添加到收藏夹

Article Chemistry, Physical

Mechanical Properties of Nano SiO2 and Carbon Fiber Reinforced Concrete after Exposure to High Temperatures

Linsong Wu et al.

MATERIALS (2019)

添加到收藏夹

Article Construction & Building Technology

Mechanical and microstructural properties of cement pastes containing carbon nanotubes and carbon nanotube-silica core-shell structures, exposed to elevated temperature

Pawel Sikora et al.

CEMENT & CONCRETE COMPOSITES (2019)

添加到收藏夹

Article Construction & Building Technology

Improved interfacial strength of SiO2 coated carbon fiber in cement matrix

Mengyuan Lu et al.

CEMENT & CONCRETE COMPOSITES (2018)

添加到收藏夹

Article Construction & Building Technology

Effects of steel fiber content and type on dynamic compressive mechanical properties of UHPCC

G. M. Ren et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Review Construction & Building Technology

Properties of cement-based composites using nanoparticles: A comprehensive review

Suvash Chandra Paul et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dispersion of Multi-Walled Carbon Nanotubes Stabilized by Humic Acid in Sustainable Cement Composites

Yuan Gao et al.

NANOMATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Efficient surface modification of carbon nanotubes for fabricating high performance CNT based hybrid nanostructures

Nan Wang et al.

CARBON (2017)

添加到收藏夹

Article Engineering, Manufacturing

Mechanical properties and reinforcing mechanisms of cementitious composites with different types of multiwalled carbon nanotubes

Xia Cui et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

添加到收藏夹

Review Engineering, Manufacturing

A critical review on research progress of graphene/cement based composites

Haibin Yang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

添加到收藏夹

Article Construction & Building Technology

Reactive powder concrete reinforced with nano SiO2-coated TiO2

Baoguo Han et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical behavior and toughening mechanism of polycarboxylate superplasticizer modified graphene oxide reinforced cement composites

Li Zhao et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Construction & Building Technology

The critical role of nanotube shape in cement composites

Roey Nadiv et al.

CEMENT & CONCRETE COMPOSITES (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical properties of ultra-high-performance concrete enhanced with graphite nanoplatelets and carbon nanofibers

Weina Meng et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Materials Science, Composites

Study on the reinforcing mechanisms of nano silica to cement-based materials with theoretical calculation and experimental evidence

Liqing Zhang et al.

JOURNAL OF COMPOSITE MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Distribution of carbon nanotubes in fresh ordinary Portland cement pastes: understanding from a two-phase perspective

Shu Jian Chen et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Chemistry, Physical

Effect of ultrasonication energy on engineering properties of carbon nanotube reinforced cement pastes

Bo Zou et al.

CARBON (2015)

添加到收藏夹

Article Construction & Building Technology

Effects of silica additives on fracture properties of carbon nanotube and carbon fiber reinforced Portland cement mortar

Peter Stynoski et al.

CEMENT & CONCRETE COMPOSITES (2015)

添加到收藏夹

Article Construction & Building Technology

Influence of nanoparticles on fluidity and mechanical properties of cement mortar

Jintao Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

添加到收藏夹

Article Construction & Building Technology

Mechanical properties and microstructure of multi-walled carbon nanotube-reinforced cement paste

Shilang Xu et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

添加到收藏夹

Article Thermodynamics

The application of thermal analysis, XRD and SEM to study the hydration behavior of tricalcium silicate in the presence of a polycarboxylate superplasticizer

Ming Liu et al.

THERMOCHIMICA ACTA (2015)

添加到收藏夹

Article Chemistry, Physical

Mechanical Properties and Durability of CNT Cement Composites

Maria del Carmen Camacho et al.

MATERIALS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

An experimental survey on combined effects of fibers and nanosilica on the mechanical, rheological, and durability properties of self-compacting concrete

Morteza H. Beigi et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Construction & Building Technology

Highly dispersed carbon nanotube reinforced cement based materials

Maria S. Konsta-Gdoutos et al.

CEMENT AND CONCRETE RESEARCH (2010)

添加到收藏夹

Article Chemistry, Physical

Electrostatic self-assembly of Fe3O4 nanoparticles on carbon nanotubes

Yong Liu et al.

APPLIED SURFACE SCIENCE (2009)

添加到收藏夹

Article Chemistry, Physical

Weak polyelectrolyte control of carbon nanotube dispersion in water

Jaime C. Grunlan et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2008)

添加到收藏夹

Article Construction & Building Technology

Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume

Ye Qing et al.

CONSTRUCTION AND BUILDING MATERIALS (2007)

添加到收藏夹

Article Engineering, Mechanical

Abrasion resistance of concrete containing nano-particles for pavement

Hui Li et al.

WEAR (2006)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dispersions of surface-modified carbon nanotubes in water-soluble and water-insoluble polymers

L Vaisman et al.

ADVANCED FUNCTIONAL MATERIALS (2006)

添加到收藏夹

Article Construction & Building Technology

Effect of polysaccharides on the hydration of cement paste at early ages

A Peschard et al.

CEMENT AND CONCRETE RESEARCH (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.