4.6 Article

Impact of Fibres on the Mechanical and Durable Behaviour of Fibre-Reinforced Concrete

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Investigation of mechanical properties of red pine needle fiber reinforced self-compacting ultra high performance concrete

Mustafa Tolga Cogurcu

Summary: With the increasing effects of global warming, the use of natural materials in engineering studies is on the rise. This study investigates the impact of red pine needles on the mechanical properties of self-compacting ultra high performance concrete. The results show that in the sample with a length of 30 mm and a fiber content of 0.50%, the slump-flow test decreases, while the compressive strength, flexural strength, and resistance to sulfate attack and freeze-thawing increase compared to the reference sample.

CASE STUDIES IN CONSTRUCTION MATERIALS (2022)

Article Construction & Building Technology

Mechanical performance, water and chloride permeability of hybrid steel-polypropylene fiber-reinforced recycled aggregate concrete

Mohamed Hechmi El Ouni et al.

Summary: The use of recycled aggregates in concrete, in combination with single steel fiber or polypropylene fibers, or a hybrid of the two, can significantly improve the flexural performance, compressive performance, and water permeability resistance of concrete. Hybrid fiber-reinforced concrete shows potential for cheaper and more eco-friendly construction compared to single steel fiber-reinforced concrete.

CASE STUDIES IN CONSTRUCTION MATERIALS (2022)

Article Construction & Building Technology

Influence of curing temperatures on the performances of fiber-reinforced concrete

Jianguo Lu et al.

Summary: This paper investigated the effect of curing temperatures on the performances of steel fiber-reinforced concrete, polypropylene fiber-reinforced concrete, and basalt fiber-reinforced concrete. The results show that curing temperature and curing age have positive effects on the compressive strength of concrete, and the compressive strength increases with the curing temperatures and curing ages. The addition of fibers into concrete improves its ductility and fiber type and dosage significantly affect the compressive strength.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Materials Science, Composites

An Experimental Study on Electrical Properties of Self-Sensing Mortar

Ramkumar Durairaj et al.

Summary: This study investigates the behavior of self-sensing mortar under different curing conditions and finds that the addition of brass fibers as electrically conductive fillers can enhance the self-sensing ability of the mortar. Water curing shows better performance for self-sensing mortars. Moreover, the results suggest that both pressure and temperature have an impact on the performance of self-sensing mortars.

JOURNAL OF COMPOSITES SCIENCE (2022)

Article Construction & Building Technology

Experimental study of mechanical properties of double-helix BFRP fiber reinforced concrete at high strain rates

Chunlei Zhang et al.

Summary: This study investigates the static and dynamic properties of basalt fiber reinforced polymer (BFRP) reinforced concrete (BFRC) using laboratory tests. The addition of BFRP fibers with double-helix geometry improves the compressive strength, splitting tensile strength, and flexural performance of BFRC. The dynamic mechanical properties of BFRC are enhanced by the addition of double-helix BFRP fibers, increasing the strain rate sensitivity of concrete.

CEMENT & CONCRETE COMPOSITES (2022)

Article Construction & Building Technology

Experimental study on mechanical properties and durability of grafted nano-SiO2 modified rice straw fiber reinforced concrete

Jinliang Liu et al.

Summary: This paper investigates the mechanical properties and durability of rice straw fiber reinforced concrete (RSFRC) modified with grafted Nano-SiO2. The results show that grafted Nano-SiO2 can enhance the compressive strength and flexural strength of the concrete, as well as improve its performance after dry-wet cycles.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Engineering, Civil

Experimental investigation of single and hybrid-fiber reinforced concrete under drop weight test

Hossein Taghipoor et al.

Summary: The use of fiber-reinforced concrete in various industries is developing due to its desired mechanical properties, lightweight structure, good energy absorption capacity, and high initial strength under impact loads.

STRUCTURES (2022)

Article

Roller Compacted Concrete with Oil Shale Ash as a Replacement of Cement: Mechanical and Durability Behavior

Ahmed M. Ashteyat et al.

International Journal of Pavement Research and Technology (2022)

Article Engineering, Multidisciplinary

The orientation effect of opening and internal strengthening on shear performance of deep concrete beam using recycled tyre steel fibres

Daudi Salezi Augustino et al.

Summary: This study evaluated the effect of using recycled waste tyre steel fibres to improve the shear resistance of deep concrete beams with openings. The results showed that the inclusion of fibres increased the shear capacity of the beams, while the addition of mesh had a limited effect on shear capacity improvement.

RESULTS IN ENGINEERING (2022)

Article Construction & Building Technology

Workability, Strength, Modulus of Elasticity, and Permeability Feature of Wheat Straw Ash-Incorporated Hydraulic Cement Concrete

Herda Yati Binti Katman et al.

Summary: This study explores the substitution of cement in concrete with wheat straw ash (WSA) as an environmentally friendly alternative. The results showed that substituting 10% of PC with WSA resulted in the highest concrete strength, while substituting 20% of PC with WSA reduced the mechanical properties and permeability of concrete.

BUILDINGS (2022)

Article Construction & Building Technology

Statistical and Practical Evaluation of the Mechanical and Fracture Properties of Steel Fibre Reinforced Concrete

Kristyna Hrabova et al.

Summary: This paper explores the statistical evaluation of CMOD tests on fibre concrete specimens, highlighting potential pitfalls and proposing statistical measures. The study demonstrates correlations between geometric properties and CMOD test results.

BUILDINGS (2022)

Article Construction & Building Technology

Development of an Ultra-High-Performance Fibre-Reinforced Concrete (UHPFRC) Manufacturable at Ambient Temperature

Koji Tamataki et al.

Summary: This study investigates the materials and mixture proportions required for manufacturing ultra-high-performance fibre-reinforced concrete (UHPFRC) under ambient temperature conditions. It is found that cement with low C(3)A and high C3S is suitable for manufacturing at ambient temperatures, the proper volume of fine aggregate is 600 kg/m(3), and the highest water-binder ratio is 21%.

BUILDINGS (2022)

Article Engineering, Multidisciplinary

Mechanical and physical characterisation of steel fibre reinforced self-compacting concrete: Different aspect ratios and volume fractions of fibres

Anas Alrawashdeh et al.

Summary: This study investigates the effect of steel fibres on the physical and mechanical properties of self-compacting concrete (SCC). The results show that the addition of steel fibres can improve the flexural strength, toughness, split tensile strength, and impact resistance of the concrete, while reducing its permeability.

RESULTS IN ENGINEERING (2022)

Article Engineering, Multidisciplinary

Flexural performance of ECC-concrete composite beams strengthened with carbon fiber sheet

Wenjie Ge et al.

Summary: This study investigates the strengthening effect of carbon fiber sheet (CFS) on steel reinforced ECC-concrete composite beams and analyzes the flexural behavior considering ECC replacement heights, layers of CFS pasted, and CFS hoops. The results show that CFS strengthening reduces crack width and enhances load bearing capacity, with the maximum improvement being 63%. A formula predicting load bearing capacity based on reasonable assumptions and materials simplified constitutive model is developed and validated.

RESULTS IN ENGINEERING (2022)

Proceedings Paper Materials Science, Multidisciplinary

Experimental study on optimization of smart mortar with the addition of brass fibres

D. Ram Kumar et al.

Summary: This study investigates the piezoresistive behavior of cementitious composites with the addition of brass fiber. The results show that the optimum piezoresistivity behavior was achieved with a fiber content of 0.25%. The addition of 0.25% brass fiber resulted in a 25.34% higher fractional change in resistance compared to conventional concrete after 28 days of air curing. Therefore, brass fiber can be effectively used as a functional filler in cementitious composites for self-sensing applications.

MATERIALS TODAY-PROCEEDINGS (2022)

Article Construction & Building Technology

A comprehensive overview of jute fiber reinforced cementitious composites

Hongwei Song et al.

Summary: The study highlights the positive impact of adding jute fibers to cementitious composites in enhancing mechanical properties, while emphasizing the importance of controlling fiber length and content. Currently, practical applications of jute fiber reinforced cementitious composites are limited, indicating a need for further research to explore their potential in civil engineering construction.

CASE STUDIES IN CONSTRUCTION MATERIALS (2021)

Article Chemistry, Physical

Structural Response of Steel Jacket-UHPC Retrofitted Reinforced Concrete Columns under Blast Loading

Mohammad Hanifehzadeh et al.

Summary: The lateral capacity of exterior concrete columns subjected to a blast load is the key factor in the building collapse probability. Retrofitting columns with UHPC jacketing can significantly improve a building's blast resistance, especially for lower floors, while casting a UHPC tube around a circular RC column can increase the moment of inertia of the column and improve the flexural strength.

MATERIALS (2021)

Article Materials Science, Multidisciplinary

Fresh and mechanical properties of concrete made of binary substitution of millet husk ash and wheat straw ash for cement and fine aggregate

Naraindas Bheel et al.

Summary: The research demonstrates that utilizing industrial or agricultural waste as raw materials in the construction industry is feasible and helps reduce environmental pollution. By using a combination of millet husk ash and wheat straw ash to replace cement and sand in concrete production, the mechanical properties of the concrete can be improved.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Review Construction & Building Technology

A review of mechanical properties of fibre reinforced concrete at elevated temperatures

Heyang Wu et al.

CEMENT AND CONCRETE RESEARCH (2020)

Review Environmental Sciences

Comparison of different natural fiber treatments: a literature review

B. Koohestani et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2019)

Article Construction & Building Technology

Mechanical properties and microstructure of lightweight aggregate concrete with and without fibers

Tao Wu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Influence of fiber reinforcement on mechanical behavior and microstructural properties of cemented tailings backfill

Gaili Xue et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Fiber type effect on strength, toughness and microstructure of early age cemented tailings backfill

Shuai Cao et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Mechanical performance of concrete made of steel fibers from tire waste

S. M. Samindi M. K. Samarakoon et al.

CASE STUDIES IN CONSTRUCTION MATERIALS (2019)

Article Construction & Building Technology

Effects of silica fume on mechanical strength and microstructure of basalt fiber reinforced cementitious composites (BFRCC)

Ali Sadrmomtazi et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Experimental research on magnesium phosphate cement mortar reinforced by glass fiber

Yuan Fang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Evaluation of dynamic increase factor models for steel fibre reinforced concrete

Lei Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Experimental investigation on the flexural behavior of steel-polypropylene hybrid fiber reinforced concrete

Biao Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Proceedings Paper Construction & Building Technology

Fiber-reinforced concrete with mineral fibers and nanosilica

Urkhanova Larisa et al.

18TH INTERNATIONAL CONFERENCE ON REHABILITATION AND RECONSTRUCTION OF BUILDINGS (CRRB) (2017)

Article Construction & Building Technology

Influence of fibres on the mechanical behaviour of fibre reinforced concrete matrixes

T. Simoes et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Mechanical and durability evaluation of fiber-reinforced self-compacting concrete

Sherif Yehia et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Investigation on mechanical properties and microstructure of high performance polypropylene fiber reinforced lightweight aggregate concrete

Jing Jun Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Effects of basalt and glass chopped fibers addition on fracture energy and mechanical properties of ordinary concrete: CMOD measurement

Mehmet Emin ArsIan

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Use of glass and nylon fibers in concrete for controlling early age micro cracking in bridge decks

Mehran Khan et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Mechanical and microstructural features of autoclaved aerated concrete reinforced with autoclaved polypropylene, carbon, basalt and glass fiber

Zuhtu Onur Pehlivanli et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Review Construction & Building Technology

Use of macro plastic fibres in concrete: A review

Shi Yin et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers

Vahid Afroughsabet et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Materials Science, Multidisciplinary

Application of high performance polypropylene fibers in concrete lining of water tunnels

Kiachehr Behfarnia et al.

MATERIALS & DESIGN (2014)

Article Engineering, Multidisciplinary

Effect of polypropylene fiber on durability of concrete composite containing fly ash and silica fume

Peng Zhang et al.

COMPOSITES PART B-ENGINEERING (2013)

Article Construction & Building Technology

Laboratory study on the effect of polypropylene fiber on durability, and physical and mechanical characteristic of concrete for application in sleepers

A. A. Ramezanianpour et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Effect of polyvinyl alcohol (PVA) fibre on dynamic and material properties of fibre reinforced concrete

Amin Noushini et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Fibre-reinforced lime-based mortars: A possible resource for ancient masonry restoration

F. Iucolano et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Engineering, Multidisciplinary

A study on the effects of high temperature on mechanical properties of fiber reinforced cementitious composites

Ahmet Cavdar

COMPOSITES PART B-ENGINEERING (2012)

Article Construction & Building Technology

Analysis of glass fiber reinforced cement (GRC) fracture surfaces

Alejandro Enfedaque et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Article Construction & Building Technology

Fracture and fatigue of natural fiber-reinforced cementitious composites

H. Savastano et al.

CEMENT & CONCRETE COMPOSITES (2009)

Article Construction & Building Technology

Material characteristics of high performance lightweight concrete reinforced with PVA

Bengi Arisoy et al.

CONSTRUCTION AND BUILDING MATERIALS (2008)

Article Nanoscience & Nanotechnology

Mechanical properties of polypropylene hybrid fiber-reinforced concrete

Machine Hsie et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Article Construction & Building Technology

Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres

A. Sivakumar et al.

CEMENT & CONCRETE COMPOSITES (2007)

Article Construction & Building Technology

A quantitative study on the plastic shrinkage cracking in high strength hybrid fibre reinforced concrete

A. Sivakumar et al.

CEMENT & CONCRETE COMPOSITES (2007)

Article Construction & Building Technology

Experimental relationship between splitting tensile strength and compressive strength of GFRC and PFRC

Y Choi et al.

CEMENT AND CONCRETE RESEARCH (2005)