3.8 Proceedings Paper

Optimization of Subsurface Imaging Antenna Capacitance through Geometry Modeling using Archimedes, Lichtenberg and Henry Gas Solubility Metaheuristics

出版社

IEEE
DOI: 10.1109/IEMTRONICS55184.2022.9795789

关键词

antenna geometry modeling; Archimedes optimization; Henry gas solubility optimization; Lichtenberg optimization; subsurface imaging

资金

  1. Philippine Council for Industry, Energy and Emerging Technology Research and Development of the Department of Science and Technology
  2. Intelligent Systems Laboratory

向作者/读者索取更多资源

In this study, a new technique for optimizing plate-wire antenna capacitance at very low frequency subsurface imaging of roads is developed using genetic programming integrated with metaheuristic methods. Experimental results showed that the hybrid GP-LA antenna model exhibited the most practical outputs with correct directional propagation and high-power efficiency.
Capacitive resistivity subsurface imaging of roads operating at very low frequency is susceptible to antenna characteristic capacitance dynamics that may cause unwanted signal reflection, coupling, and unfavorable effect on reception sensitivity. Antennas are conventionally modeled using a complex and repetitive default mathematical method that is prone to human error and discrete results. To address this emerging challenge, this study has developed a new technique for plate-wire antenna capacitance optimization through equatorial dipole-dipole antenna geometry modeling using genetic programming (GP) integrated with metaheuristic methods, namely Archimedes optimization algorithm (AOA), Lichtenberg algorithm (LA), and Henry gas solubility optimization (HGSO). GP was used to construct the antenna capacitance fitness function based on 241 combinations of wire antenna radius and elevation, and dipole plate elevation, length, width, and thickness measurements Minimization of antenna capacitance (approaching 1 nF) to achieve quasi-static condition was performed using GP-AOA, GP-LA, and GP-HGSO. The 3 metaheuristic-based antennas were 3D-modeled using Altair Feko and compared from the default antenna's electrical features. It was found that even with the smallest dipole geometry, hybrid GP-LA antenna model exhibited the most practical outputs at 5 kHz with correct directional propagation based on its radiation pattern, a realistic receiver voltage of -8.86 dBV which is close to the default model, and a high-power efficiency of 99.925%. While hybrid GP-AOA and GP-HGSO resulted in indirect coupled transceiver systems with unsuitable antenna characteristic capacitance inducing anomalous receiver voltages. The experimental results prove the validity of the developed technique for more accurate determination of optimal antenna geometry.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

3.8
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据