期刊
BUILDINGS
卷 12, 期 10, 页码 -出版社
MDPI
DOI: 10.3390/buildings12101692
关键词
phosphogypsum; calcium sulphoaluminate aluminate cement; gypsum; calcium hydroxide; strength; hydration properties
资金
- National Natural Science Foundation of China [52172015]
- Fundamental Research Funds for the Central Universities in China [DUT21ZD201]
- Natural Science Foundation of Guizhou Provincial Department of Education [[2021]301]
This study investigates the use of mineral admixtures to adjust the performance of calcium sulphoaluminate cement prepared from phosphogypsum. The results show that adjusting the blending levels can improve the compressive strength and hydration properties of the cement. Adding gypsum dihydrate promotes the hydration of the cement, while adding calcium hydroxide reduces the compressive strength.
Using phosphogypsum (PG) as a raw material to prepare calcium sulphoaluminate cement (CAS) is an effective way of treating phosphogypsum. In order to meet the different application requirements of CSA cement and promote the application of CAS cement, it is necessary to add mineral admixtures to adjust the performance of cement. This paper incorporated two minerals, gypsum dihydrate (C$H-2) and calcium hydroxide (CH), into cement clinker prepared from phosphogypsum. The compressive strength and hydration process of the mixtures with different blending levels were investigated around the C(4)A(3)$-C$H-2 system (SC) and the C(4)A(3)$-C$H-2-CH system (SCC). The optimum dosing level was determined on the basis of the strength and hydration properties. In the SC system, adding C$H-2 promoted the hydration of C(4)A(3)$. The compressive strength of the cement was highest at a C$H-2/C(4)A(3)$ molar ratio of 1.5, with a 7-day compressive strength of 56.5 MPa. AFt was mostly needle-rod and columnar and was tightly cemented to the gel phase, improving the denseness of the matrix. When the molar ratio was 2, the strength of the cement was inverted, and the shape of the AFt changed from needle and rod to columnar, the size of the grains increased, and it could not be filled with the AH(3) phase in an excellent staggered manner. At the same time, C$H-2 was not fully reacted, increasing matrix porosity and inversion of strength. In the SCC system, adding CH reduced the cement's compressive strength, and the compressive strength reduction increased with the increase in admixture. According to the experimental results, CH inhibited the formation of AFt, resulting in the appearance of new hydration products, AFm. As the amount of CH increased, the amount of hydration products, AFm, increased, while the amount of AFt and AH(3) decreased. However, adding CH raised the paste's pH and later facilitated the development of strength. The optimum admixture of CH/C(4)A(3)$ was 0.5 mol.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据