☆ 4.6 Article

Synergistic reinforcement mechanism of basalt fiber/cellulose nanocrystals/polypropylene composites

NANOTECHNOLOGY REVIEWS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Textiles

The Investigation of Fiber Surface Condition from Basalt-like Rocks for Enhanced Industrial Applications

Yurii Chuvashov et al.

Summary: The article presents the investigations on the surface properties of basalt fibers from rocks and highlights the impact of acid treatment on their structure. The results show that acid-treated basalt fibers exhibit high porosity and developed surface, making them suitable for the production of composite materials with various applications, particularly in filter materials.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Polymer Science

Synergistic toughening and electrical functionalization of an epoxy usingMWCNTsand silane- /plasma-activated basalt fibers

Dong Quan et al.

Summary: This study found that plasma treatment of short basalt fibers can enhance adhesion between the fibers and epoxy resin, leading to improved mechanical properties and fracture toughness of the composites. Synergistic toughening effects were observed when using plasma-activated BF/MWCNT hybrid modifiers, showing potential for developing strong, tough, and electrically conductive epoxy composites.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cellulose Nanocrystals Influence Polyamide 6 Crystal Structure, Spherulite Uniformity, and Mechanical Performance of Nanocomposite Films

Daniel A. Osorio et al.

Summary: CNCs can induce a chiral allomorph and nucleate small uniform spherulites in PA6 at low loadings, resulting in stiffer nanocomposites. Higher loadings lead to CNC aggregation and non-spherulitic crystalline features. Overall, the reinforcement mechanism of CNCs in PA6 is dominated by morphological changes, rather than percolation.

ACS APPLIED POLYMER MATERIALS (2021)

添加到收藏夹

Article Crystallography

Thermoplastic Extrusion Additive Manufacturing of High-Performance Carbon Fiber PEEK Lattices

Carolyn Carradero Santiago et al.

Summary: PEEK has gained significant attention in additive manufacturing due to its high performance properties and high melting point. The development of high-temperature soluble support has enabled the printing of high-performance carbon fiber thermoplastics, providing the potential for optimization of density to enhance performance.

CRYSTALS (2021)

添加到收藏夹

Article Materials Science, Paper & Wood

High mechanical performance based on the alignment of cellulose nanocrystal/chitosan composite filaments through continuous coaxial wet spinning

Qian Gao et al.

Summary: Cellulose nanocrystals with high crystallinity exhibit high mechanical stiffness and strength, but their dispersibility limits spinnability and orientation. By oxidizing nanocellulose to obtain regionally oxidized CNCs with carboxyl groups, and using chitosan as a sheath solution to induce orientation, oriented reinforced composite filaments can achieve a high mechanical strength of 104 MPa with an orientation index of 0.73. The tensile strength and elastic modulus of these filaments increased significantly compared to unmodified CNCs spun fibers.

CELLULOSE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mechanical Properties of Hybrid Graphene Nanoplatelet-Nanosilica Filled Unidirectional Basalt Fibre Composites

Ummu Raihanah Hashim et al.

Summary: Basalt fibre (BF) is a promising natural reinforcing material for polymer composites, and when modified with nanofillers like graphene nanoplatelets (GNP) and nanosilica (NS), it shows enhanced mechanical properties. The incorporation of hybrid nanofillers contributes to the improvement in the mechanical properties of the composites, especially in terms of modulus and strength. This study demonstrates the potential of BF as an alternative to synthetic glass fibre for mechanical components and structures.

NANOMATERIALS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Cole-cole plot of graphene nano filler disseminated glass fiber reinforced polymer composites

G. Rathinasabapathi et al.

Summary: By incorporating nano fillers into epoxy resin, the dynamic mechanical properties of Glass Fiber Reinforced Polymers are significantly enhanced, especially at a 6% weight of nano fillers. Graphene nano fillers exhibit better dispersion and phase integrity compared to Multi Walled Carbon Nano Tubes.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Review Engineering, Environmental

Advance Study of Cellulose Nanocrystals Properties and Applications

Tariq Aziz et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

添加到收藏夹

Article Chemistry, Physical

Direct growth of carbon nanotubes on basalt fiber for the application of electromagnetic interference shielding

Chao Chang et al.

CARBON (2020)

添加到收藏夹

Article Materials Science, Composites

Improved interfacial shear strength in polyphenylene sulfide/carbon fiber composites via the carboxylic polyphenylene sulfide sizing agent

Yuan Dong et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Polymer Science

Mechanical and Rheological Behaviour of Composites Reinforced with Natural Fibres

Mariana D. Stanciu et al.

POLYMERS (2020)

添加到收藏夹

Article Materials Science, Composites

Surface modification of basalt fiber (BF) for improving compatibilities between BF and poly lactic acid (PLA) matrix

Shuqiang Liu et al.

COMPOSITE INTERFACES (2019)

添加到收藏夹

Article Polymer Science

NanoSiO2, strengthens and toughens epoxy resin/basalt fiber composites by acting as a nano-mediator

Xi Li et al.

JOURNAL OF POLYMER ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Composites

Enhanced Interfacial Adhesion and Properties of Polypropylene/Carbon Fiber Composites by Fiber Surface Oxidation in Presence of a Compatibilizer

Huafeng Tian et al.

POLYMER COMPOSITES (2019)

添加到收藏夹

Article Chemistry, Physical

The effect of fibre sizing on the modification of basalt fibre surface in preparation for bonding to polypropylene

Calvin Ralph et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Article Materials Science, Composites

Enhanced interfacial strength of aramid fiber reinforced composites through adsorbed aramid nanofiber coatings

Jalal Nasser et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Biochemistry & Molecular Biology

Improvement of polylactic acid film properties through the addition of cellulose nanocrystals isolated from waste cotton cloth

Zhanhong Wang et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical properties of short basalt fibre reinforced polypropylene and the effect of fibre sizing on adhesion

Calvin Ralph et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Textiles

Effect of silane KH550 on interface of basalt fibers (BFs)/poly (lactic acid) (PLA) composites

Shu-Qiang Liua et al.

INDUSTRIA TEXTILA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Impact of silane treated basalt fibers and montmorillonite nano-clay on polypropylene composites

Vinay D. Kumar et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Chemistry, Applied

Effect of impregnation time on performance of long glass fiber-reinforced polypropylene composites

Ying He et al.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Composites

Enhanced Mechanical and Thermal Properties of Short Carbon Fiber Reinforced Polypropylene Composites by Graphene Oxide

Cui-Cui Wang et al.

POLYMER COMPOSITES (2018)

添加到收藏夹

Review Materials Science, Composites

Synergistic effects of carbon nanotubes on the mechanical properties of basalt and carbon fiber-reinforced polyamide 6 hybrid composites

Jozsef Szakacs et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

The effects of silane coupling agents on the mechanical properties of basalt fiber reinforced poly(butylene terephthalate) composites

Cagrialp Arslan et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Composites

Evaluation of Basalt Fibre Composites for Marine Applications

P. Davies et al.

APPLIED COMPOSITE MATERIALS (2018)

添加到收藏夹

Review Materials Science, Composites

Review of electrical properties for polypropylene based nanocomposite

Wenfeng Liu et al.

COMPOSITES COMMUNICATIONS (2018)

添加到收藏夹

Article Engineering, Manufacturing

Modification of basalt fibre using pyrolytic carbon coating for sensing applications

Bin Hao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

添加到收藏夹

Review Polymer Science

Advances in preparation, modification, and application of polypropylene membrane

Nurul F. Himma et al.

JOURNAL OF POLYMER ENGINEERING (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Morphological, dynamic mechanical, rheological and impact strength properties of the PP/PVB blends: the effect of waste PVB as a toughener

Ali Reza Zanjanijam et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Chemistry, Applied

Mechanical and thermal properties of Posidonia oceanica cellulose nanocrystal reinforced polymer

Fedia Bettaieb et al.

CARBOHYDRATE POLYMERS (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

A short review on basalt fiber reinforced polymer composites

Vivek Dhand et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Polymer Science

MICROSTRUCTURE AND RHEOLOGICAL PROPERTIES OF THERMOPLASTIC POLYURETHANE AND ITS COMPOSITES

Li-li Wang et al.

ACTA POLYMERICA SINICA (2013)

添加到收藏夹

Review Materials Science, Composites

Mechanical properties of polypropylene composites: A review

Quazi T. H. Shubhra et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2013)

添加到收藏夹

Article Materials Science, Paper & Wood

Effects of hydrolysis conditions on the morphology, crystallinity, and thermal stability of cellulose nanocrystals extracted from kenaf bast fibers

Hanieh Kargarzadeh et al.

CELLULOSE (2012)

添加到收藏夹

Review Engineering, Manufacturing

Silane coupling agents used for natural fiber/polymer composites: A review

Yanjun Xie et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

添加到收藏夹

Article Polymer Science

Enhancement of interfacial properties of basalt fiber reinforced nylon 6 matrix composites with silane coupling agents

T. Deak et al.

EXPRESS POLYMER LETTERS (2010)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review: current international research into cellulose nanofibres and nanocomposites

S. J. Eichhorn et al.

JOURNAL OF MATERIALS SCIENCE (2010)

添加到收藏夹

Article Materials Science, Textiles

Chemical Composition and Mechanical Properties of Basalt and Glass Fibers: A Comparison

Tamas Deak et al.

TEXTILE RESEARCH JOURNAL (2009)

添加到收藏夹

Article Materials Science, Composites

Discontinuous basalt and glass fiber reinforced PP composites from textile prefabricates: effects of interfacial modification on the mechanical performance

T. Czigany et al.

COMPOSITE INTERFACES (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.