☆ 4.6 Article

A Numerical Analysis of Hybrid Spur Gears with Asymmetric Teeth: Stress and Dynamic Behavior

MACHINES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

A numerical investigation on the hybrid spur gears: Stress and dynamic analysis

Tufan G. Yilmaz et al.

Summary: This study numerically examines the effect of rim thickness of hybrid gears on various factors such as root stress, joint stress, tooth stiffness, natural frequency, and dynamic behavior. It is found that hybrid gears have the potential to reduce the mass of gear transmission systems without negatively impacting root stress and dynamic factors if appropriate design parameters are selected. Rim thickness is identified as a critical parameter for hybrid gears.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Materials Science, Characterization & Testing

Effects of asymmetric tooth profile on single-tooth stiffness of polymer gears

Celalettin Yuce et al.

Summary: Due to the development of polymer materials and additive manufacturing technologies, gear wheels made of polymer materials are widely used in various industries. Determining the dynamic behavior and tooth stiffness of polymer gears has become significant, and this study measured the single-tooth stiffness of polymer gears with symmetrical and asymmetrical profiles experimentally. The experimental results were compared with a finite element model and showed good correlation.

MATERIALS TESTING (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Comparison and Verification of Dynamic Simulations and Experiments for a Modified Spur Gear Pair

Zhi-Gen Wang et al.

Summary: This study conducted static and dynamic analyses on a spur gear pair with linear tip relief and longitudinal crowning, and compared the analysis results with dynamic experiments. A mathematical model and a finite element analysis program were developed to calculate the contact stress, contact patterns, and mesh stiffness of the gear pair. The dynamic analysis predicted the dynamic transmission error (DTE) at different speeds and loads. The experimental DTE was compared with the simulated DTE to verify the prediction of the spur gear pair's vibration performance under different rotational conditions.

MACHINES (2022)

添加到收藏夹

Article Engineering, Mechanical

Effects of rim thickness and drive side pressure angle on gear tooth root stress and fatigue crack propagation life

Oguz Dogan et al.

Summary: Gears play a crucial role in power transmission systems, but are susceptible to high loads and impact forces, leading to surface cracks. By studying different rim thicknesses and pressure angles, the effects on fatigue crack propagation life and root stress were explored, resulting in a significant decrease in maximum stress values and a substantial increase in fatigue propagation life.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental measurement and numerical validation of single tooth stiffness for involute spur gears

Fatih Karpat et al.

MEASUREMENT (2020)

添加到收藏夹

Article Engineering, Manufacturing

A comparative analysis of adhesive bonding and interference fitting as joining technologies for hybrid metal-composite gear manufacturing

Piervincenzo G. Catera et al.

INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2020)

添加到收藏夹

Article Engineering, Mechanical

Crack detection for spur gears with asymmetric teeth based on the dynamic transmission error

Oguz Dogan et al.

MECHANISM AND MACHINE THEORY (2019)

添加到收藏夹

Article Engineering, Mechanical

A comparative numerical study of forged bi-metal gears: Bending strength and dynamic response

Tufan G. Yilmaz et al.

MECHANISM AND MACHINE THEORY (2019)

添加到收藏夹

Article Materials Science, Composites

On the Design and Simulation of Hybrid Metal-Composite Gears

Piervincenzo G. Catera et al.

APPLIED COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Mechanics

An innovative tooth root profile for spur gears and its effect on service life

Ting Zou et al.

MECCANICA (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

A Study of Lightweight Door Hinges of Commercial Vehicles Using Aluminum Instead of Steel for Sustainable Transportation

Tufan Gurkan Yilmaz et al.

SUSTAINABILITY (2017)

添加到收藏夹

Article Thermodynamics

An improved numerical method for the mesh stiffness calculation of spur gears with asymmetric teeth on dynamic load analysis

Fatih Karpat et al.

ADVANCES IN MECHANICAL ENGINEERING (2017)

添加到收藏夹

Article Mechanics

Multi-scale modeling of triaxial braided composites for FE-based modal analysis of hybrid metal-composite gears

Piervincenzo Giovanni Catera et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Engineering, Mechanical

Warm forging of an aluminium alloy for the differential case in an automobile transmission

Sangik Lee et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2016)

添加到收藏夹

Article Mechanics

Damage analysis of composite-aluminium adhesively-bonded single-lap joints

T. E. A. Ribeiro et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Mechanics

Characterizing cohesive zone model using a mixed-mode direct method

H. Khoramishad et al.

ENGINEERING FRACTURE MECHANICS (2016)

添加到收藏夹

Article Engineering, Mechanical

Gear tooth mesh stiffness: A comparison of calculation approaches

Christopher G. Cooley et al.

MECHANISM AND MACHINE THEORY (2016)

添加到收藏夹

Article Engineering, Mechanical

The influence of tooth pitting on the mesh stiffness of a pair of external spur gears

Xihui Liang et al.

MECHANISM AND MACHINE THEORY (2016)

添加到收藏夹

Article Mechanics

Design and fabrication of a metal-composite hybrid wheel with a friction damping layer for enhancement of ride comfort

Ji-Hun Bae et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Engineering, Mechanical

Evaluating the time-varying mesh stiffness of a planetary gear set using the potential energy method

Xihui Liang et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2014)

添加到收藏夹

Article Green & Sustainable Science & Technology

A Case Study: Designing for Sustainability and Reliability in an Automotive Seat Structure

Celalettin Yuce et al.

SUSTAINABILITY (2014)

添加到收藏夹

Article Mechanics

The application of polymer composites to the table-top machine tool components for higher stiffness and reduced weight

Sung-Kyum Cho et al.

COMPOSITE STRUCTURES (2011)

添加到收藏夹

Article Mechanics

Design of μ-CNC machining centre with carbon/epoxy composite-aluminium hybrid structures containing friction layers for high damping capacity

Ju-Ho Kim et al.

COMPOSITE STRUCTURES (2010)

添加到收藏夹

Article Engineering, Mechanical

Dynamic analysis of involute spur gears with asymmetric teeth

Fatih Karpat et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2008)

添加到收藏夹

Article Engineering, Mechanical

Computer aided analysis of bending strength of involute spur gears with asymmetric profile

K Cavdar et al.

JOURNAL OF MECHANICAL DESIGN (2005)

添加到收藏夹

Article Engineering, Manufacturing

Bending load capacity enhancement using an asymmetric tooth profile - (1st report, influences of pressure angle on tooth root stress and bending stiffness)

G Deng et al.

JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING (2003)

添加到收藏夹

Article Acoustics

The effect of tooth wear on the vibration spectrum of a spur gear pair

JH Kuang et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2001)

添加到收藏夹

Article Engineering, Mechanical

An experimental method to measure gear tooth stiffness throughout and beyond the path of contact

RG Munro et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.