Effect of magnesium doping on properties of lithium-rich layered oxide cathodes based on a one-step co-precipitation strategy

A Mg-doped lithium-rich layered oxide material is successfully synthesized via a co-precipitation process and a subsequent high-temperature solid state method. The chemical composition, structural characteristics and elemental distribution of the Mg-doped lithium-rich layered oxide material are investigated by inductively coupled plasma optical emission spectroscopy (ICP-OES), scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDXS). The results show that Mg is effectively and equably doped into the samples, which can replace partially Li+ in the cathode material. The electrochemical properties of the Mg-doped lithium-rich layered oxide material are evaluated and compared with those of the conventional Li-1.5[Mn0.75Ni0.25]O2+delta cathode material. It can be found that the Mg-doped lithium-rich layered oxide material exhibits excellent electrochemical performance. It can deliver a high initial discharge capacity of 248.6 mA h g(-1) and an improved initial coulombic efficiency of 87.9% at 0.1C with a cut-off voltage of 2.0-4.6 V. Moreover, the capacity retention reaches a relatively high value of 94.2% after 200 cycles at 0.5C. In contrast, the capacity retention of conventional Li-1.5[Mn0.75Ni0.25]O2+delta is only 59.6%. In addition, the Mg-doped lithium-rich layered oxide material also shows excellent rate capability, which can display a discharge capacity of 130.1 mA h g(-1) even at 10C and a capacity retention of 92.6% after 100 cycles at 5C. The enhanced electrochemical properties of the Mg-doped lithium-rich layered oxide material could be attributed to the introduction of Mg, which can effectively mitigate the structural deterioration of the material and facilitate the diffusion coefficient of Li+ during cycling.