3.8 Article

Assessment of a diaphragm thermoacoustic Stirling engine using the energy standpoint and genetic algorithm

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Numerical study on a heat-driven piston-coupled multi-stage thermoacoustic-Stirling cooler

Jingyuan Xu et al.

Summary: This study presents a novel heat-driven multi-stage thermoacoustic cooler with high efficiency, compact size, and ease of control. Through analysis and simulations, the distribution of key parameters was investigated, showing significant improvements in efficiency and cooling capacity compared to existing systems under two temperature conditions.

APPLIED ENERGY (2022)

Article Energy & Fuels

Performance Improvement of a Thermoacoustic Stirling Engine With In-Line Phase-Adjuster

Isares Dhuchakallaya et al.

Summary: This study investigates the influence of a phase-adjuster on the energy conversion efficiency of a thermoacoustic Stirling heat engine. Numerical and experimental investigations show that adjusting the phase field using the phase-adjuster can improve the efficiency of the system. The proposed model accurately reflects the experimental results and demonstrates the effectiveness of the phase-adjuster in tuning the acoustic impedance.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2022)

Article Energy & Fuels

Acoustic field improvement through adjustable resonator to enhance the performance of thermoacoustic-Stirling engine

Isares Dhuchakallaya et al.

Summary: This study demonstrates the operation and performance characteristics of a thermoacoustic Stirling heat engine with a phase-adjuster through simulations and experiments. The phase-adjuster helps maintain high efficiency and improve energy conversion efficiency of the TASHE, highlighting its importance in tuning the acoustic field for performance enhancement.

ENERGY REPORTS (2022)

Article Thermodynamics

Asymmetrically heated multi-stage travelling-wave thermoacoustic electricity generator

Wigdan Kisha et al.

Summary: Recent developments in thermoacoustic engines have shown that thermoacoustic technology is a viable option for waste heat recovery and low-cost electricity generation. By using the asymmetric heat method, the unbalanced acoustic impedance within the cores can be effectively matched, leading to an increase in thermoacoustic efficiency. Both numerical calculations and laboratory measurements confirm that this new technique can increase loop acoustic power and electrical power output in thermoacoustic engines.

ENERGY (2021)

Article Thermodynamics

Energy conversion of thermoacoustic engines with evaporation and condensation

Mariko Senga et al.

Summary: This study combined analytical and experimental methods to investigate the energy conversion of a thermoacoustic engine with a wet regenerator, showing that evaporation and condensation processes play a significant role in energy conversion, with the energy conversion efficiency being up to 4.5 times higher than that of gas-only conversion.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Article Acoustics

Study of a thermoacoustic-Stirling engine connected to a piston-crank-flywheel assembly

Guillaume Penelet et al.

Summary: This paper discusses the theoretical description of self-sustained oscillations resulting from the coupling of a piston-crank-flywheel assembly with a thermoacoustic-Stirling prime mover. The system's complete dynamics are described by a fourth-order nonlinear dynamical system, with stable rotations of the flywheel appearing through a saddle-node bifurcation above a threshold temperature. Simulation results show good agreement with experimental data.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2021)

Article Thermodynamics

Justifying performance of thermo-acoustic Stirling engines based on a novel lumped mechanical model

A. R. Tavakolpour-Saleh et al.

Summary: This paper presents a novel lumped mechanical model incorporating modern control theory to investigate performance and startup condition of thermo-acoustic Stirling engines (TASEs). The study reveals that TASEs can be considered as physical regulators from the viewpoint of modern control theory. Design parameters and quality index are analyzed to evaluate resonance phenomenon in the TASEs, and the proposed mathematical model incorporating the control-based design technique is validated using practical data of three prototype engines.

ENERGY (2021)

Article Thermodynamics

Modeling, construction, and testing of a diaphragm thermoacoustic Stirling engine

Shahryar Zare et al.

Summary: This article models, constructs, and tests a diaphragm thermoacoustic Stirling engine, confirming the working principle of the thermoacoustic system and predicting a stable limit cycle in the engine's nonlinear dynamic response. Experimental results validate the mathematical model, demonstrating that the inexpensive engine can operate at a frequency of 13.8 Hz.

ENERGY CONVERSION AND MANAGEMENT (2021)

Review Green & Sustainable Science & Technology

Multi-physics coupling in thermoacoustic devices: A review

Geng Chen et al.

Summary: The latest developments in thermoacoustic devices have shown comparable power output and efficiency, higher reliability, and lower cost compared to conventional low-grade heat recovery technologies. Good coupling between multiple physical fields is crucial in realizing these potentials. This review provides a comprehensive analysis of the multi-physics coupling effects within thermoacoustic devices, offering insights into the underlying mechanisms and guidelines for improving modern thermoacoustic technologies.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Review Energy & Fuels

Free piston Stirling engines: A review

Shahryar Zare et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Article Thermodynamics

Onset and damping characteristics of a closed two-phase thermoacoustic engine

Jingqi Tan et al.

APPLIED THERMAL ENGINEERING (2019)

Article Automation & Control Systems

Onset of Oscillations in Traveling Wave Thermo-Acoustic-Piezo-Electric Harvesters Using Circuit Analogy and SPICE Modeling

M. Nouh et al.

JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME (2014)

Article Materials Science, Multidisciplinary

Performance of a traveling wave thermoacoustic-piezoelectric energy harvester: An electrical circuit analogy approach

Andrew Roshwalb et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2014)

Article Thermodynamics

Non-linear phenomena occurring during the start-up process of a travelling-wave looped-tube thermoacoustic engine

Abdulrahman S. Abduljalil et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2012)

Article Acoustics

Onset of Self-Excited Oscillations of Traveling Wave Thermo-Acoustic-Piezoelectric Energy Harvester Using Root-Locus Analysis

O. Aldraihem et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2012)

Article Acoustics

Basic treatment of onset conditions and transient effects in thermoacoustic Stirling engines

A. T. A. M. de Waele

JOURNAL OF SOUND AND VIBRATION (2009)

Article Acoustics

A thermoacoustic-Stirling heat engine: Detailed study

S Backhaus et al.

JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2000)