☆ 4.5 Article

Efficient inorganic CsPbI2Br perovskite indoor photovoltaics demonstrated via slower crystallization by incorporated dimethylammonium iodide

ECOMAT (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Simultaneously enhanced efficiency and ambient stability of inorganic perovskite solar cells by employing tetramethylammonium chloride additive in CsPbI2Br

In Su Jin et al.

Summary: By adding TMACl, the phase stability and crystallinity of CsPbI2Br films can be improved, and the film morphology can be enhanced. Moreover, TMACl imparts hydrophobicity to the film surface, resulting in excellent power conversion efficiency and stability.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

CsPbBrI2 perovskites with low energy loss for high-performance indoor and outdoor photovoltaics

Kai-Li Wang et al.

Summary: The study utilized (NH4)(2)C2O4 center dot H2O treatment to improve the efficiency of CsPbBrI2 perovskite solar cells and reduce energy loss. The optimized device showed better performance under indoor lighting compared to the reference device.

SCIENCE BULLETIN (2021)

添加到收藏夹

Article Chemistry, Physical

Efficient and Stable Graded CsPbI3-xBrx Perovskite Solar Cells and Submodules by Orthogonal Processable Spray Coating

Jin Hyuck Heo et al.

Summary: In this study, inorganic CsPbI2Br-based perovskite thin films with a well-defined CsPbI3-xBrx composition gradient were fabricated using a scalable and orthogonal processable spray-coating approach. The graded structure broadened the absorption wavelength range, increased carrier lifetime, and improved charge separation and collection efficiency within a device stack. The power conversion efficiency reached 16.81% for a 0.096-cm(2) PSC, and a monolithically integrated perovskite sub-module achieved an efficiency of 13.82% with less than 9% degradation over 1,000 hours of continuous 1-sun light soaking.

JOULE (2021)

添加到收藏夹

Article Chemistry, Physical

CsCl-induced defect control of CsPbI2Br thin films for achieving open-circuit voltage of 1.33 V in all-inorganic perovskite solar cells

In Su Jin et al.

Summary: The optimization of alpha-CsPbI2Br morphology with low defect density and large grain size through the addition of cesium chloride (CsCl) improves the energy loss challenge in all-inorganic perovskite solar cells (PSCs). The CsPbI2Br film grown with CsCl exhibits high crystallinity and largely-grained morphology, leading to reduced defect density and enhanced stability. The CsCl-employed device shows improved efficiency and stability, making it applicable for both indoor and outdoor environments.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Morphology controlled nanocrystalline CsPbBr3 thin-film for metal halide perovskite light emitting diodes

Bong Woo Kim et al.

Summary: The morphology and crystal grain size of inorganic CsPbBr3 metal halide perovskite films can be controlled through a diffusion-controlled anti-solvent dripping crystallization method. The optimized 8:2 CsPbBr3 MHP LED shows significantly enhanced performance and better operating stability compared to the pristine device.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Physical

Interfacial Passivation Engineering of Perovskite Solar Cells with Fill Factor over 82% and Outstanding Operational Stability on n-i-p Architecture

Bowen Yang et al.

Summary: The use of cyclohexylethylammonium iodide (CEAI) as an interface material successfully improved the fill factor and power conversion efficiency of perovskite solar cells. This was achieved through the formation of a 2D perovskite interlayer, which reduced trap-assisted recombination and enhanced surface hydrophobicity for outstanding stability.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dopant-Free Polymer HTM-Based CsPbI2Br Solar Cells with Efficiency Over 17% in Sunlight and 34% in Indoor Light

Zhanglin Guo et al.

Summary: A new polymer, PDTDT, has been developed as a dopant-free hole-transporting material for CsPbI2Br solar cells, which shows high efficiency and stability, making it a potential alternative to popular doped Spiro-OMeTAD and P3HT HTM.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Dual Passivation of SnO2 by Tetramethylammonium Chloride for High-Performance CsPbI2Br-Based Inorganic Perovskite Solar Cells

Bhaskar Parida et al.

Summary: The modification of the SnO2 electron transport layer (ETL) by tetramethylammonium chloride (TMACl) enhances the electron transfer efficiency at the interface of CsPbI2Br and SnO2 ETL, significantly improving the efficiency of inorganic perovskite solar cells. Additionally, TMACl also increases the stability of the device under humidity and thermal stress.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Large-Scale Synthesis of Uniform Pbl2(DMSO) Complex Powder by Solvent Extraction Method for Efficient Metal Halide Perovskite Solar Cells

Sang Jin Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Methylammonium Iodide-Mediated Controlled Crystal Growth of CsPbI2Br Films for Efficient and Stable All-Inorganic Perovskite Solar Cells

Kyeong Su Kim et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Pb-Reduced CsPb0.9Zn0.1I2Br Thin Films for Efficient Perovskite Solar Cells

Hongrui Sun et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Achieving Over 15% Efficiency in Organic Photovoltaic Cells via Copolymer Design

Yong Cui et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

The Diversity of Layered Halide Perovskites

Matthew D. Smith et al.

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 48 (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interpretation and evolution of open-circuit voltage, recombination, ideality factor and subgap defect states during reversible light-soaking and irreversible degradation of perovskite solar cells

Wolfgang Tress et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Methodologies toward Efficient and Stable Cesium Lead Halide Perovskite-Based Solar Cells

Jae Keun Nam et al.

ADVANCED SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Unveiling the Crystal Formation of Cesium Lead Mixed-Halide Perovskites for Efficient and Stable Solar Cells

Jae Keun Nam et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Potassium Incorporation for Enhanced Performance and Stability of Fully Inorganic Cesium Lead Halide Perovskite Solar Cells

Jae Keun Nam et al.

NANO LETTERS (2017)

添加到收藏夹

Article Optics

Dye-sensitized solar cells for efficient power generation under ambient lighting

Marina Freitag et al.

NATURE PHOTONICS (2017)

添加到收藏夹

Article Chemistry, Physical

Highly efficient metal halide substituted CH3NH3I(PbI2)1-x(CuBr2)x planar perovskite solar cells

Muhammad Jahandar et al.

NANO ENERGY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Planar CH3NH3PbI3 Perovskite Solar Cells with Constant 17.2% Average Power Conversion Efficiency Irrespective of the Scan Rate

Jin Hyuck Heo et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Planar CH3NH3PbBr3 Hybrid Solar Cells with 10.4% Power Conversion Efficiency, Fabricated by Controlled Crystallization in the Spin-Coating Process

Jin Hyuck Heo et al.

ADVANCED MATERIALS (2014)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.