4.5 Article

An experimental study on bond behaviors of reinforced concrete under fatigue loading and corrosion

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

The combined effect of load and corrosion on the flexural performance of recycled aggregate concrete beams

Jian Wang et al.

Summary: This study investigates the combined effect of load and steel corrosion on the flexural performance of recycled aggregate concrete beams. The results show that the load level and aggregate replacement ratio have an impact on the number and spacing of bending cracks in the beams, and the maximum mass loss of tensile reinforcement has a linear relationship with the ultimate moment capacity of the beams.

STRUCTURAL CONCRETE (2023)

Article Construction & Building Technology

Bond performance of GFRP bars embedded in steel-PVA hybrid fiber concrete subjected to repeated loading

Liangli Xiao et al.

Summary: The bond performance of GFRP bars embedded in steel fiber-PVA hybrid fiber concrete was investigated in this study. The results showed that the bond strength between GFRP bars and the hybrid fiber concrete increased with the increase of steel fiber volume, and the energy consumption also increased. The slip corresponding to the ultimate bond strength under repeated loading was in good agreement with the results under monotonic loading. Specimen P1S8 exhibited good energy dissipation capacity and deformation capacity under repeated loads, and the bond stiffness was higher and more stable during the loading and unloading stages.

STRUCTURAL CONCRETE (2023)

Review Construction & Building Technology

Corrosion-induced damages and failures of posttensioned bridges: A literature review

Antonia Menga et al.

Summary: This paper presents the results of a literature review on cases of corrosion of posttensioned bridges and few prestressed structures, aiming to increase knowledge about the structural consequences of corrosion-induced failure mechanisms. The study found that most corrosion-sensitive structures were segmental and box section beam bridges, requiring extraordinary maintenance.

STRUCTURAL CONCRETE (2023)

Article Construction & Building Technology

Effects of the bond properties of ETS-GFRP bar to concrete on the shear behavior of ETS-GFRP-strengthened RC beams

Linh Van Hong Bui

Summary: This study numerically investigates the effects of bond properties between embedded through-section-glass fiber-reinforced polymer (ETS-GFRP) bars and concrete on the performance of the reinforced concrete (RC) beams strengthened in shear with ETS-GFRP bars. The key bond parameters, including interfacial fracture energy (G(f)), bond stiffness (K), and bond strength (tau(m)), are examined. Results show that the bond properties significantly influence the postpeak behavior and ductility of the ETS-strengthened beams. The finite element (FE) model based on the triangle bond model accurately predicts the load-deflection relationship, failure mechanism, and debonding process of the ETS-GFRP bars from concrete. The use of a flexible and ductile adhesive with low bond stiffness and high interfacial fracture energy enhances the ductility of the ETS-GFRP-strengthened beams. High cohesive strength at the ETS-GFRP bar-concrete interfaces helps distribute shear cracks and restrict local debonding, promoting the deformability of the ETS-GFRP-strengthened beams.

STRUCTURAL CONCRETE (2023)

Article Construction & Building Technology

Effect of prestressing corrosion on failure in bridges

Davide Messina et al.

Summary: Infrastructures are crucial for transportation and movement of people and goods in a country. In Italy, the number of viaducts is the highest in Europe due to its complex topography. Prestressed concrete structures pose a vulnerability in the road networks, especially those that are aging. Therefore, studying the strength of infrastructure networks is important, and this research focuses on developing a reliable and fast analysis tool.

STRUCTURAL CONCRETE (2023)

Article Construction & Building Technology

Overview of the cyclic response of reinforced concrete members subjected to artificial chloride-induced corrosion

Benjamin Matthews et al.

Summary: This paper introduces and summarizes experimental work on the long-term implications of chloride-induced deterioration on the mechanical properties of reinforced concrete (RC) elements. The study found that corrosion damage has a greater impact on the displacement ductility of RC columns, and transverse reinforcement poses a higher risk and vulnerability to deterioration, leading to a transition in failure mechanism.

STRUCTURAL CONCRETE (2023)

Article Construction & Building Technology

Effects of the bond properties of ETS-GFRP bar to concrete on the shear behavior of ETS-GFRP-strengthened RC beams

Linh Van Hong Bui

Summary: This study numerically investigates the effects of bond properties between embedded through-section-glass fiber-reinforced polymer (ETS-GFRP) bars and concrete on the performance of reinforced concrete (RC) beams strengthened in shear with ETS-GFRP bars. Results demonstrate that the bond properties mainly affect the postpeak behavior and ductility of the strengthened beams. The use of a flexible and ductile adhesive with small bond stiffness and high interfacial fracture energy can lead to increased ductility of the strengthened beams. The high cohesive strength of the ETS-GFRP bar-concrete interfaces can distribute shear cracks and limit local debonding, encouraging deformability of the strengthened beams.

STRUCTURAL CONCRETE (2023)

Article Construction & Building Technology

Bond performance of GFRP bars embedded in steel-PVA hybrid fiber concrete subjected to repeated loading

Liangli Xiao et al.

Summary: This study investigates the bond performance between glass fiber-reinforced polymer (GFRP) bars and steel fiber-PVA hybrid fiber concrete. The results show that the bond strength and energy consumption between GFRP bars and the hybrid concrete increase with the increase of steel fiber volume. The slip corresponding to the ultimate bond strength under variable-amplitude repeated loading is in good agreement with the experimental results under monotonic loading.

STRUCTURAL CONCRETE (2023)

Article Construction & Building Technology

The combined effect of load and corrosion on the flexural performance of recycled aggregate concrete beams

Jian Wang et al.

Summary: This study investigates the combined effect of load and steel corrosion on the flexural performance of recycled aggregate concrete beams. The results show that the load level and aggregate replacement ratio have significant effects on the number and spacing of bending cracks as well as the ultimate moment capacity of the beams.

STRUCTURAL CONCRETE (2023)

Article Construction & Building Technology

Experimental investigation on the fatigue design of anchor channels

Thilo Froehlich et al.

Summary: This article provides an overview of the design methods for anchor channels under fatigue loading, discusses experimental investigation results, and gives recommendations for fatigue design.

STRUCTURAL CONCRETE (2022)

Review Construction & Building Technology

Corrosion-induced damages and failures of posttensioned bridges: A literature review

Antonia Menga et al.

Summary: This paper presents a comprehensive literature review on cases of corrosion in posttensioned bridges and few prestressed structures. Most corrosion-sensitive structures were segmental and box section beam bridges. The observed damage was mainly attributed to design and execution mistakes that facilitated the ingress of external chlorides causing corrosion.

STRUCTURAL CONCRETE (2022)

Article Construction & Building Technology

Effect of prestressing corrosion on failure in bridges

Davide Messina et al.

Summary: The aim of this study is to develop a reliable and fast analysis tool for studying the robustness of infrastructure networks. Experimental research on artificially corroded posttensioned concrete beams was conducted to investigate the reliability of concentrated plasticity models. A numerical model using finite element analysis was also used to study vulnerability in actual structures.

STRUCTURAL CONCRETE (2022)

Article Construction & Building Technology

Overview of the cyclic response of reinforced concrete members subjected to artificial chloride-induced corrosion

Benjamin Matthews et al.

Summary: This paper summarizes the experimental research on the long-term effects of chloride-induced deterioration on reinforced concrete elements, showing that corrosion damage has significant consequences on the mechanical properties of the elements, especially on the displacement ductility of RC columns.

STRUCTURAL CONCRETE (2022)

Article Construction & Building Technology

Experimental investigation of fatigue bond behavior between deformed steel bar and concrete

Weiping Zhang et al.

CEMENT & CONCRETE COMPOSITES (2020)

Article Engineering, Civil

Crack Propagation-Based Fatigue Life Prediction of Corroded RC Beams Considering Bond Degradation

Zhongzhao Guo et al.

JOURNAL OF BRIDGE ENGINEERING (2020)

Review Engineering, Civil

Residual Capacity of Corroded Reinforced Concrete Bridge Components: State-of-the-Art Review

Mohammad M. Kashani et al.

JOURNAL OF BRIDGE ENGINEERING (2019)

Article Engineering, Civil

Engineering bond model for corroded reinforcement

Mattias Blomfors et al.

ENGINEERING STRUCTURES (2018)

Article Engineering, Civil

The bond behavior between concrete and corroded steel bar under repeated loading

Hongwei Lin et al.

ENGINEERING STRUCTURES (2017)

Article Construction & Building Technology

Variation and degradation of steel and concrete bond performance with corroded stirrups

H. J. Zhou et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Local bond performance of rebar embedded in steel-polypropylene hybrid fiber reinforced concrete under monotonic and cyclic loading

Le Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Materials Science, Multidisciplinary

Electrochemical study the corrosion behaviour of carbon steel in mortars under compressive and tensile stresses

Xingguo Feng et al.

CORROSION SCIENCE (2016)

Article Construction & Building Technology

Effects of stirrup corrosion on bond-slip performance of reinforcing steel in concrete: An experimental study

Haijun Zhou et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Bond behaviour of normal/recycled concrete and corroded steel bars

Yuxi Zhao et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Confinement effect on the bond behaviour of beams under static and repeated loading

Rania Al-Hammoud et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Severely Corroded RC with Cover Cracking

Dario Coronelli et al.

JOURNAL OF STRUCTURAL ENGINEERING-ASCE (2013)

Article Construction & Building Technology

Unified Bond Stress-Slip Model for Reinforced Concrete

Yu-Fei Wu et al.

JOURNAL OF STRUCTURAL ENGINEERING (2013)

Article Engineering, Civil

Analytical model for the bond-slip behaviour of corroded ribbed reinforcement

Karin Lundgren et al.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2012)

Article Construction & Building Technology

Mechanics of bond under repeated loading

Ahmad Rteil et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Article Construction & Building Technology

Bond analysis of corroded reinforced concrete beams under monotonic and fatigue loads

Rania Al-Hammoud et al.

CEMENT & CONCRETE COMPOSITES (2010)

Article Engineering, Civil

S-N curves for fatigue of bond in reinforced concrete structures under transverse tension

Alexander Lindorf et al.

ENGINEERING STRUCTURES (2010)

Article Construction & Building Technology

Experimental investigation on the bond of reinforcing bars in high performance concrete under cyclic loading

Jie Li et al.

MATERIALS AND STRUCTURES (2007)

Article Construction & Building Technology

Advanced crack width analysis of reinforced concrete beams under repeated loads

Byung Hwan Oh et al.

JOURNAL OF STRUCTURAL ENGINEERING (2007)

Article Construction & Building Technology

Realistic models for local bond stress-slip of reinforced concrete under repeated loading

Byung Hwan Oh et al.

JOURNAL OF STRUCTURAL ENGINEERING (2007)

Article Construction & Building Technology

Effect of corrosion on bond in reinforced concrete under cyclic loading

CQ Fang et al.

CEMENT AND CONCRETE RESEARCH (2006)

Article Construction & Building Technology

Analyzing crack width to predict corrosion in reinforced concrete

T Vidal et al.

CEMENT AND CONCRETE RESEARCH (2004)

Article Construction & Building Technology

Corrosion influence on bond in reinforced concrete

CQ Fang et al.

CEMENT AND CONCRETE RESEARCH (2004)