☆ 4.7 Article

Characterization of artificial stone developed with granite waste and glass waste in epoxy matrix

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Computer Science, Interdisciplinary Applications

Computational predictions for estimating the performance of flexural and compressive strength of epoxy resin-based artificial stones

Aydin Shishegaran et al.

Summary: The main goal of this study is to predict the flexural and compressive strength of artificial stones made of epoxy resin and various combinations of stone powder, sand, and stone sludge. Through experiments and modeling, it was found that samples using epoxy resin 828 have the highest strength, while samples using epoxy resin 557 are more flexible.

ENGINEERING WITH COMPUTERS (2023)

添加到收藏夹

Article Green & Sustainable Science & Technology

Engineered Stone Produced with Glass Packaging Waste, Quartz Powder, and Epoxy Resin

Gabriela Nunes Sales Barreto et al.

Summary: Engineered stone (ENS) is an artificial stone composed of stone wastes bonded together by a polymeric matrix, presenting a profitable alternative for solid waste management. This study successfully developed ENS based on waste glass and quartz powder, classified as a high-quality coating material with properties similar to commercial artificial stones.

SUSTAINABILITY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Comparison between Synthetic and Biodegradable Polymer Matrices on the Development of Quartzite Waste-Based Artificial Stone

Carlos Paulino Agrizzi et al.

Summary: The study evaluates the physical, mechanical, and structural properties of artificial stone made from industrial waste. The results show that the manufactured artificial stone exhibits low water absorption and porosity, as well as high flexural strength. The wear and impact resistance of the artificial stone are also confirmed.

SUSTAINABILITY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Incorporation of Industrial Glass Waste into Polymeric Resin to Develop Artificial Stones for Civil Construction

Juan Peixoto et al.

Summary: The study focuses on incorporating glass waste from industrial lamination into an epoxy resin matrix to produce a novel artificial stone for civil construction. The artificial stone developed showed high flexural strength, low water absorption, and suitability for low to medium traffic environments.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Composites

Mechanical and physical investigation of an artificial stone produced with granite residue and epoxy resin

Maria Luiza P. M. Gomes et al.

Summary: The study aimed to develop artificial granitic stone (AGS) using 85% granite and 15% epoxy resin, presenting superior properties to natural granite, suitable for high-traffic flooring applications due to its satisfactory mechanical and physical properties, and resistance to temperature oscillations and impact.

JOURNAL OF COMPOSITE MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

A new technology of transforming recycled glass waste to construction components

Dilan Robert et al.

Summary: Despite the large amount of glass wastes generated globally, only a small portion is recycled, with the majority ending up in stockpiles. This study investigates a new technology that uses recovered glass wastes to produce building components, such as access covers, and demonstrates in laboratory tests that the access cover can support external loads up to 4 tonnes.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Assessment of the recycling potential of stone processing plant wastes based on physicochemical features and market opportunities

Lisandro Simao et al.

Summary: The study examines the potential for utilizing stone waste (SW) from the dimension stone industry, finding promising applications in ceramics and cement. New recycling proposals are also suggested to address the environmental impact of SW.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The mechanical strength of the artificial stones, containing the travertine wastes and sand

Aydin Shishegaran et al.

Summary: The study investigates the development of sustainable artificial stones by reusing and recycling travertine waste. Various mix proportions were proposed and tested, with the best sample showing compressive and flexural strengths of 67.3 and 60.7 MPa, respectively. Epoxy resin type 828 was found to produce stronger samples compared to epoxy 557.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Analytical and experimental investigation on magnetorheological behavior of CoFe2O4-rGO-incorporated epoxy fluid composites

Nitai Chandra Adak et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)

添加到收藏夹

Article Archaeology

Investigation on the chemical structure and ageing transformations of the cycloaliphatic epoxy resin EP2101 used as stone consolidant

Elena Tesser et al.

JOURNAL OF CULTURAL HERITAGE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Physical and mechanical evaluation of artificial marble produced with dolomitic marble residue processed by diamond-plated bladed gang-saws

Tcharllis Joao da Cunha Demartini et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Production and characterization of a novel artificial stone using brick residue and quarry dust in epoxy matrix

Maria Luiza P. M. Gomes et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2018)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Development Of Composite Slabs Of Marble Powder Embedded Epoxy Resin

T. Naveen Kumar et al.

MATERIALS TODAY-PROCEEDINGS (2018)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

FABRICATION OF ARTIFICIAL STONE FROM MARBLE RESIDUE BY RESIN TRANSFER MOLDING

Carlos Eduardo Gomes Ribeiro et al.

20TH BRAZILIAN CONFERENCE ON MATERIALS SCIENCE AND ENGINEERING (2014)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

PRODUCTION OF SYNTHETIC ORNAMENTAL MARBLE AS A MARBLE WASTE ADDED POLYESTER COMPOSITE

Carlos Eduardo Gomes Ribeiro et al.

20TH BRAZILIAN CONFERENCE ON MATERIALS SCIENCE AND ENGINEERING (2014)

添加到收藏夹

Article Construction & Building Technology

Temperature effects on mechanical behaviour of engineered stones

J. P. Lam dos Santos et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

添加到收藏夹

Article Construction & Building Technology

Reuse of waste material from decorative quartz solid surfacing in the manufacture of hot bituminous mixes

M. C. Rubio et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

添加到收藏夹

Article Construction & Building Technology

Artificial stone slab production using waste glass, stone fragments and vacuum vibratory compaction

Ming-Yu Lee et al.

CEMENT & CONCRETE COMPOSITES (2008)

添加到收藏夹

Article Polymer Science

Mechanical properties of epoxy networks based on DGEBA and aliphatic Amines

Filiberto Gonzalez Garcia et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2007)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Interface effects on mechanical properties of particle-reinforced composites

S Debnath et al.

DENTAL MATERIALS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.