☆ 4.6 Article

Enhancement of microchannel heat sink heat transfer: Comparison between different heat transfer enhancement strategies

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

On the assessment of the thermal performance of microchannel heat sink with nanofluid

C. J. Ho et al.

Summary: By studying the thermal performance evaluation of microchannel heat sinks with nanofluids, it is found that the use of nanofluids can reduce the thermal resistance of the heat sink, increase the uniformity index of the heating surface, and enhance the mean convection heat transfer coefficient.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2023)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement in oblique finned curved microchannel using hybrid nanofluid

R. Vinoth et al.

Summary: The experimental study analyzed the heat transfer characteristics of an oblique finned curved microchannel heat sink with different working fluids. The results showed that the curved microchannel heat sink had higher heat transfer rate, PEC and pressure drop compared to the straight channel heat sink. When using a hybrid nanofluid, the heat transfer rate of the curved microchannel heat sink was also higher.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

添加到收藏夹

Article Thermodynamics

Thermal efficiency improvement of parabolic trough solar collector using different kinds of hybrid nanofluids

Wassila Ajbar et al.

Summary: This paper investigates the use of eight hybrid nanofluids to improve the thermal efficiency of a parabolic trough solar collector (PTSC). The developed thermal model shows good agreement with experimental data, with an average error of 1.92% and 2.34% in calculating outlet temperature and thermal efficiency. The simulation results demonstrate that the thermal efficiency of PTSC can achieve a maximum improvement of 2.8% using hybrid nanofluids and an average improvement of 1.6% compared to Syltherm 800.

CASE STUDIES IN THERMAL ENGINEERING (2023)

添加到收藏夹

Article Thermodynamics

Microchannel heat sinks with nanofluids for cooling electronic components: Performance enhancement, challenges, and limitations

Hussein M. Maghrabie et al.

Summary: Nowadays, cooling electronic components is considered a critical issue. This study focuses on fluid flow, heat transfer, and thermal performance to avoid hot spots in electronic devices. It discusses the use of nanofluids in microchannels for cooling electronics, considering the thermophysical properties and future prospects of nanofluids in electronic components.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2023)

添加到收藏夹

Article

Effects of surface modifications on pool boiling heat transfer with HFE-7100

Genesis Mlakar et al.

International Journal of Thermofluids (2023)

添加到收藏夹

Article Thermodynamics

Experimental study on the thermal characteristics of a 3D thermosyphon heat sink

S. Y. Qin et al.

Summary: In this study, a three-dimensional thermosyphon (3D-TS) heat sink was experimentally investigated, which combined the advantages of vapor chamber, thermosyphon, and folded fins. The results showed that the overall thermal resistance had a negative correlation with the heating power and air volume flow rate, with the lowest thermal resistance of 0.14 K.W-1 achieved. The high temperature on the folded fins indicated the extension of phase change heat transfer from the flat vapor chamber to the vertical thermosyphon tubes. It was also found that a relatively large air volume flow rate could not further reduce the overall thermal resistance for a small heating power.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Thermodynamics

Flow boiling of dielectric fluid HFE-7000 in a minichannel with pin fin structured surfaces

Aysenur Ates et al.

Summary: Flow boiling of dielectric fluids in minichannels provides promising cooling alternatives for achieving high heat flux cooling. Experimental investigations on flow boiling performance in minichannels were conducted with six different surface characteristics and HFE-7000 as the working fluid. The results revealed different flow patterns, including single-phase flow, bubbly flow, intermittent flow, and annular flow. It was found that the presence of elliptical pin fins significantly enhanced the flow boiling performance, while the presence of distribution pin fins improved flow distribution and heat transfer. Tip clearance also exhibited a positive effect at low values (<5%).

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Thermodynamics

Enhanced boiling heat transfer of HFE-7100 on copper foams under overflow conditions

Meiqi Cen et al.

Summary: This article proposes the method of saturated boiling on copper foam to enhance liquid supply and facilitate vapor departure for efficient thermal management of electronic devices. Experimental results show that saturated boiling on copper foam significantly increases critical heat flux and heat transfer coefficient. Overflow boiling provides an effective way to improve boiling heat transfer on porous medium by forced liquid supply and reduced hindrance of hydrostatic pressure to vapor departure.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Thermodynamics

Flow and thermal performance of a multi-jet twisted square microchannel heat sink using CuO-water nanofluid

Zhiming Tan et al.

Summary: Due to advancements in micro manufacturing and 3D printing, the complex shape of microchannel heat sinks (MCHS) can now be achieved, allowing for improved heat transfer characteristics. In this study, a twisted tube geometry was applied to microchannels and the thermal and hydrodynamic performance of twisted square microchannels with jet impingement was investigated. The arrangement of the jet channels was studied, comparing one-jet and multi-jet microchannel heat sinks in terms of temperature profile, pressure drop, and heat transfer characteristics. The results showed that applying the twisted geometry increased the Nusselt number by 16.48% with minimal pressure drop increase. Furthermore, integrating jet impingement improved the thermal-hydrodynamic performance of MCHS, reducing thermal resistance by up to 41%. Finally, it was concluded that jet arrangement at torsion angles of 45 degrees, 135 degrees, and 225 degrees provided better performance. This study provides quantitative characterization of MCHS performance and guidance for jet arrangement design.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Chemistry, Physical

Experimental study of the rheological behavior of TiO2-Al2O3/mineral oil hybrid nanofluids

John Shelton et al.

Summary: The present study experiments on the rheological properties of Al2O3-TiO2/MO hybrid nanofluids and finds that the flow behavior of the hybrid nanofluids tends to be more Newtonian compared to conventional nanofluids. The study also observes that the ratio of the hybrid mixture of constituent nanoparticle components affect the rheological characteristics of the nanofluids in an intuitive way.

JOURNAL OF MOLECULAR LIQUIDS (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental study, prediction modeling, sensitivity analysis, and optimization of rheological behavior and dynamic viscosity of 5W30 engine oil based SiO2/MWCNT hybrid nanofluid

Mojtaba Sepehrnia et al.

Ain Shams Engineering Journal (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Aqueous hybrid nanofluids containing silver-reduced graphene oxide for improving thermo-physical properties

Alexandru Vardaru et al.

Summary: The main goal of this paper is to develop a new solar hybrid nanofluid with improved thermo-physical properties for solar applications in order to enhance solar efficiency. Reduced graphene oxide (rGO) was synthesized using the modified Hummers' method, while silver nanoparticles (Ag NPs) were synthesized through liquid-phase reduction. Characterization of the Ag-rGO/water hybrid nanofluid was done using scanning electron microscopy, transmission electron microscopy, and energy dispersive X-ray spectroscopy. Stability of the prepared hybrid nanofluid was investigated through measurements of Zeta potential and PI index. The results showed enhanced thermal conductivity and viscosity, as well as a slight increase in density, with increasing concentration of Ag-rGO nanofluid.

DIAMOND AND RELATED MATERIALS (2023)

添加到收藏夹

Article Thermodynamics

Influence of system pressure on flow boiling in microchannels

Vivian Y. S. Lee et al.

Summary: The effect of system pressure on the flow boiling characteristics of HFE-7200 in a parallel microchannel heat sink was studied. Increasing pressure reduced pressure drop and increased bubble generation frequency and two-phase heat transfer coefficients. Smaller bubble diameters at higher pressures caused a delay in flow regime transition and flow reversal. The experimental work provides promising methods to manage flow instabilities and enhance heat transfer performance in two-phase microchannel systems.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2023)

添加到收藏夹

Article Thermodynamics

Convection behaviour of mono and hybrid nanofluids containing B4C and TiB2 nanoparticles

Javier P. Vallejo et al.

Summary: Hybrid nanofluids containing boron carbide and titanium diboride demonstrate significant improvements in heat transfer, especially under turbulent flow. Experimental results show that TiB2/B4C hybrid nanofluids based on a propylene glycol/water mixture exhibit the highest heat transfer coefficient improvements, up to 13%, and the highest performance index ratio, up to 1.03, compared to mono nanofluids.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

添加到收藏夹

Article Thermodynamics

Recent advances on the thermal properties and applications of nanofluids: From nanomedicine to renewable energies

Reinaldo R. Souza et al.

Summary: NFs are colloidal suspensions that enhance heat transfer capacity of fluids, with applications in various fields such as electronics cooling and renewable energies. Parameters like BF, NPs size, concentration, shape, and fabrication procedures impact the thermal properties of NFs. Models for predicting specific heat, viscosity, thermal conductivity, and density of NFs are listed and evaluated.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Energy & Fuels

Complex Fluid Flow in Microchannels and Heat Pipes with Enhanced Surfaces for Advanced Heat Conversion and Recovery Systems

Ana Sofia Moita et al.

Summary: This paper proposes a multiscale approach for heat recovery systems and applies it to two different applications. Experimental techniques, such as visualization and thermography, are used to optimize the heat sink geometry. The study demonstrates the potential of using two-phase flows and suggests the use of enhanced interfaces to address microscale instabilities.

ENERGIES (2022)

添加到收藏夹

Article Thermodynamics

Combined effect of thermal and hydraulic performance of different nanofluids on their cooling efficiency in microchannel heat sink

Fahad S. Alkasmoul et al.

Summary: This study evaluates the thermal and hydraulic performance of different nanofluids in a microchannel heat sink and finds that nanofluids can enhance its thermal performance. However, considering the flow rate and pumping power, the use of nanofluids deteriorates the heat dissipation efficiency of the heat sink, resulting in no beneficial aspects in terms of thermal performance and energy cost.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Thermofluid characterization of nanofluids in spray cooling

Guido Marseglia et al.

Summary: The current study investigates the parametric characterization of nanofluid sprays to enhance the thermal performance of spray cooling systems. The results show that nanofluids can improve the thermal performance of spray cooling, with the lowest surface temperature obtained with 0.5% alumina nanofluid and the silver nanofluid with spherical particles achieving the lowest surface temperature compared to triangular particles. The heat transfer coefficients decrease with increasing thermal conductivity and dynamic viscosity of the nanofluids, while a positive correlation is found between the specific heat capacity of the nanofluids and the spray cooling capacity.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Study on the performance of a miniscale channel heat sink with Y-shaped unit channels based on entransy analysis

Shaojie Wu et al.

Summary: This study experimentally investigates the optimization of heat transfer performance for a liquid-cooled miniscale channel heat sink. The study develops models to analyze the effects of flowrate and heat flux on entransy dissipation rate, thermal resistance, and efficiency of entransy. The study also proposes models to determine the optimal flowrate based on heat transfer ability and average surface temperature. The results show that the optimal heat dissipation performance is achieved at a specific flowrate, allowing for higher heat transfer ability and lower average surface temperature.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

A remarkable CHF of 345W/cm 2 is achieved in a wicked-microchannel using HFE-710 0

Wenming Li et al.

Summary: Boiling heat transfer of dielectric fluids is enhanced by a new cooling concept that utilizes enhanced capillary-driven force and dedicated vapor pathways. The use of silicon micro-pinfin arrays as wicks significantly improves the flow boiling heat transfer performance, with sustainable evaporation and efficient liquid supply as the enhancement mechanisms. The overall heat transfer coefficient is increased by up to 75%, and a high critical heat flux of approximately 345 W/cm(2) is achieved.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Thermal transport analysis of six circular microchannel heat sink using nanofluid

Hassan Waqas et al.

Summary: The rapid growth of electronics devices in the late 20th century brought about a revolution in the electronics industry. However, the miniaturization and continuous operation of these devices often lead to overheating and reduced performance. To address this issue, it has become essential to incorporate effective cooling systems in device design. Nanofluids, with their excellent properties, have gained attention for their ability to efficiently cool devices and improve energy efficiency. This numerical study focuses on examining the surface temperature, heat transfer rate, thermal resistance, Darcy friction factor, and reliability of microelectronic chips in minichannel heat sinks, by utilizing TiO2/water nanofluids as coolants and comparing the outcomes with conventional water cooling.

SCIENTIFIC REPORTS (2022)

添加到收藏夹

Article Energy & Fuels

Analysis of the energy conversion properties and applications of Nanofluids: A review

Shuai Liu et al.

Summary: This paper summarizes the thermo-physical properties and influencing factors of nanofluids, and analyzes their laws and mechanisms. These research findings provide researchers in the field of energy conversion with a better understanding of the energy conversion properties and applications of nanofluids.

ENERGY REPORTS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Thermal efficiency enhancement of solar aircraft by utilizing unsteady hybrid nanofluid: A single-phase optimized entropy analysis

Wasim Jamshed et al.

Summary: This article investigates the working function and performance of parabolic trough solar collector (PTSC) in solar aircraft wings. By analyzing the heat transfer in a tangent hyperbolic hybrid nanofluid (THHNF), which contains Copper (Cu) and Silica (SiO2) nanoparticles in viscous fluid, it is found that the hybrid nanofluid exhibits better performance in heat transmission compared to conventional nanofluid.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2022)

添加到收藏夹

Review Thermodynamics

Recent advancements in thermal performance of nano-fluids charged heat pipes used for thermal management applications: A comprehensive review

Sudhir Kumar Pathak et al.

Summary: This study summarizes the recent advancements in the thermal performance of nanofluid-charged heat pipes used for various thermal management applications. It discusses the preparation, characterization, and stability enhancement methods of nanofluids. The study found that a porous coating on the wick surface contributes to a decrease in thermal resistance, and nanofluid-charged heat pipes perform best at a filling ratio of 50-70%. The heat transfer coefficient of heat pipes increases by 20-25% with nanofluids compared to distilled water. The higher thermal conductivity and increased nucleation sites of nanofluids improve the thermal efficiency of heat pipes.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Aerospace

Heat Conduction and Microconvection in Nanofluids: Comparison between Theoretical Models and Experimental Results

Gianluigi Bovesecchi et al.

Summary: A nanofluid is a suspension of nanoparticles in a liquid base fluid and can be used as a working fluid in heat exchangers. There are various physical phenomena that affect heat conduction in nanofluids, such as clusters, the formation of adsorbate nanolayers, scattering of phonons, Brownian motion, and thermophoresis. Developing a theoretical model that accurately considers all these phenomena for different parameter values is challenging. This study aims to find the conditions under which certain phenomena prevail over others and provide a quantitative tool for selecting the appropriate theoretical model.

AEROSPACE (2022)

添加到收藏夹

Article Thermodynamics

Experimental and numerical study on the flow and heat transfer characteristic of nanofluid in the recirculation zone of backward-facing step microchannels

Di Yang et al.

Summary: Nanofluids play a significant role in reducing the temperature of the bottom surface downstream of microchannels, with higher volume fractions leading to increased heat transfer coefficients. Increasing the step height enhances heat transfer efficiency, although it also results in higher flow resistance.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Flow boiling of R134a and HFE-7000 in a single silicon microchannel with microstructured sidewalls

Stefano Bortolin et al.

Summary: The study investigated flow boiling heat transfer in a single silicon microchannel with microstructured sidewalls using R134a and HFE-70 0 0 as working fluids. Results showed that microstructures on the sidewalls led to a reduction in wall superheat and an increase in heat transfer coefficient, indicating a higher number of active nucleation sites and providing important data for the design of thermal management systems for electronics.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Thermal Conductivity of Nanofluids: A Review on Prediction Models, Controversies and Challenges

Ines Goncalves et al.

Summary: Nanofluids are increasingly being considered for various applications, with research focusing on factors such as nanoparticle stability and predictive modeling when it comes to thermal conductivity.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Nanofluids Characterization for Spray Cooling Applications

Miguel Sanches et al.

Summary: This paper investigates the thermal performance of nanofluids in spray cooling applications, focusing on the impact of nanoparticle geometry, concentration, and structure on heat transfer enhancement. The study shows that increasing nanoparticle concentration leads to lower surface temperatures and higher heat fluxes, while also affecting the thermophysical properties of the nanofluids. This research highlights the importance of experimental data in accurately setting model parameters for spray dynamics and heat transfer phenomena.

SYMMETRY-BASEL (2021)

添加到收藏夹

Article Thermodynamics

Enhanced flow boiling of HFE-7100 in picosecond laser fabricated copper microchannel heat sink

Peilin Cui et al.

Summary: The enhanced flow boiling heat transfer of HFE-7100 in wavy copper microchannel heat sink was studied experimentally, with micro porous structures naturally formed on the sidewalls and bottom increasing wall surface roughness. Evaluation criteria show that heat transfer enhancement in the wavy microchannel outweighs the pressure-drop penalty in single-phase flow region. Different flow patterns and heat transfer modes were analyzed in two-phase flow region, with significant improvements in heat transfer coefficient observed in wavy microchannel compared to straight channel.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Comparative study of flow boiling heat transfer and pressure drop of HFE-7000 in continuous and segmented microchannels

Chao Dang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Review Thermodynamics

Effect of a micro heat sink geometric design on thermo-hydraulic performance: A review

Yousef Alihosseini et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Structure and geometric dimension optimization of interlaced microchannel for heat transfer performance enhancement

Weisong Ling et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

A novel thermal efficiency analysis on the thermo-hydraulic performance of nanofluids in an improved heat exchange system under adjustable magnetic field

Fan Fan et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Thermal analysis of a microchannel heat sink cooled by two-phase flow boiling of Al2O3 HFE-7100 nanofluid

Ali Soleimani et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2020)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement of a radiator with mass-producing nanofluids (EG/water-based Al2O3 nanofluids) for cooling a 100 kW high power system

Tae Jong Choi et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Effect of nanoparticles concentration on the characteristics of nanofluid sprays for cooling applications

M. Maly et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Thermodynamics

Multiphase modeling approach for ionic liquids (ILs) based nanofluids: Improving the performance of heat transfer fluids (HTFs)

Titan C. Paul et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Comparative performance assessment of solar dish assisted s-CO2 Brayton cycle using nanofluids

Muhammad Sajid Khan et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Realizing highly coordinated, rapid and sustainable nucleate boiling in microchannels on HFE-7100

Jiaxuan Ma et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Numerical study of TiO2-based nanofluids flow in microchannel heat sinks: Effect of the Reynolds number and the microchannel height

Victor A. Martinez et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Comparison of pin-fin and finned shape heat sink for power electronics in future aircraft

Assel Sakanova et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Review Thermodynamics

Recent research contributions concerning use of nanofluids in heat exchangers: A critical review

Mehdi Bahiraei et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

A comparative study of flow boiling HFE-7100 in silicon nanowire and plainwall microchannels

Tamanna Alam et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Flow boiling of HFE-7100 in silicon microchannels integrated with multiple micro-nozzles and reentry micro-cavities

Wenming Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Flow and heat transfer behaviour of nanofluids in microchannels

James Bowers et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Flow and heat transfer behaviour of nanofluids in microchannels

James Bowers et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2018)

添加到收藏夹

Article Thermodynamics

An additively manufactured metallic manifold-microchannel heat exchanger for high temperature applications

Xiang Zhang et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

New correlations to predict the thermal and hydraulic performance of different longitudinal pin fins as vortex generator in miniature channel: Utilizing MWCNT-water and Al2O3-water nanofluids

Elham Hosseinirad et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Influence of aspect ratio on the thermal performance of rectangular shaped micro channel heat sink using CFD code

D. R. S. Raghuraman et al.

ALEXANDRIA ENGINEERING JOURNAL (2017)

添加到收藏夹

Article Thermodynamics

Numerical modeling of turbulent heat transfer of a nanofluid at supercritical pressure

Bo Ruan et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Effectiveness of nanofluid on improving the performance of microchannel heat sink

Junmei Wu et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Experimental study on the rheological behavior of silver-heat transfer oil nanofluid and suggesting two empirical based correlations for thermal conductivity and viscosity of oil based nanofluids

Sadegh Aberoumand et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Effects of non-Newtonian behaviour on the thermal performance of nanofluids in a horizontal channel with discrete regions of heating and cooling

Botong Li et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Flow boiling heat transfer of HFE-7000 in nanowire-coated microchannels

Fanghao Yang et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Review Thermodynamics

A review of the capabilities of high heat flux removal by porous materials, microchannels and spray cooling techniques

Przemyslaw Smakulski et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Optimization of thermal performances and pressure drop of rectangular microchannel heat sink using aqueous carbon nanotubes based nanofluid

Salma Halelfadl et al.

APPLIED THERMAL ENGINEERING (2014)

添加到收藏夹

Article Thermodynamics

Optimization and comparison of double-layer and double-side micro-channel heat sinks with nanofluid for power electronics cooling

Assel Sakanova et al.

APPLIED THERMAL ENGINEERING (2014)

添加到收藏夹

Review Green & Sustainable Science & Technology

Characteristics of heat transfer and fluid flow in microtube and microchannel using conventional fluids and nanofluids: A review

B. H. Salman et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)

添加到收藏夹

Review Nanoscience & Nanotechnology

A Review on Nanofluids: Preparation, Stability Mechanisms, and Applications

Wei Yu et al.

JOURNAL OF NANOMATERIALS (2012)

添加到收藏夹

Article Thermodynamics

A critical synthesis of thermophysical characteristics of nanofluids

Khalil Khanafer et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)

添加到收藏夹

Article Thermodynamics

Heat Transfer Enhancement of Wavy Channels Using Al2O3 Nanoparticles

Mostafa Esmaeili et al.

JOURNAL OF ENHANCED HEAT TRANSFER (2010)

添加到收藏夹

Article Engineering, Manufacturing

Low-Temperature Two-Phase Microchannel Cooling for High-Heat-Flux Thermal Management of Defense Electronics

Jaeseon Lee et al.

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2009)

添加到收藏夹

Article Mechanics

Effects of channel dimension, heat flux, and mass flux on flow boiling regimes in microchannels

Tannaz Harirchian et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2009)

添加到收藏夹

Article Thermodynamics

Cooling performance of a microchannel heat sink with nanofluids

Seok Pil Jang et al.

APPLIED THERMAL ENGINEERING (2006)

添加到收藏夹

Article Thermodynamics

Heat transfer mechanisms during flow boiling in microchannels

SG Kandlikar

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2004)

添加到收藏夹

Article Thermodynamics

Conceptions for heat transfer correlation of nanofluids

YM Xuan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.