☆ 4.8 Article

Flow field configuration design for a large-scale hydrogen polymer electrolyte membrane fuel cell

APPLIED ENERGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Physical

Recent development in design a state-of-art proton exchange membrane fuel cell from stack to system: Theory, integration and prospective

Lixin Fan et al.

Summary: As an efficient energy converter, the proton exchange membrane fuel cell (PEMFC) has various applications and is influenced by factors such as material properties, geometric designs, operating conditions, and control strategies. The interaction between components and subsystems affects the performance and durability of PEMFC system. This review focuses on fuel cell stack design, subsystems design and management, mass transfer enhancement, and system integration to comprehensively understand the coupling effect of different factors on PEMFC performance and durability.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

添加到收藏夹

Article Chemistry, Physical

Analysis on the influence of crack structure on MPL transmission properties

Junbiao Dai et al.

Summary: Microcracks in the micro porous layer (MPL) have a significant impact on the transport properties of liquid water and gas. A 3D MPL model was developed, and cracks at different depths and horizontal inclination angles were added to simulate the liquid water transport process. The study showed that liquid water flows at a higher velocity in the cracks and larger interconnected gaps in the MPL. The permeability of the MPL without cracks is 34.7% higher than the average permeability of the MPL with cracks at different depths. The permeability is also influenced by the location of the cracks and varies with the crack depth and horizontal inclination angle.

JOURNAL OF POWER SOURCES (2023)

添加到收藏夹

Article Energy & Fuels

Optimal design of a cathode flow field for performance enhancement of PEM fuel cell

Yu Zhou et al.

Summary: Flow field design optimization is crucial for enhancing the performance of PEMFC by improving mass transfer and water removal capacity. A 3D, two-phase, isothermal numerical model is used to evaluate the performance of an optimized cathode flow field, and the results are validated through visualization experiments. It is found that the opposite sinusoidal wave flow fields with different inlet configurations provide significant performance enhancement compared to parallel flow fields. The dual-inlet flow field with a block design shows the highest performance enhancement of 9.30% at 2.2 A cm-2. The Pearson correlation coefficient is introduced to evaluate the correlation between each index and PEMFC performance, and it is confirmed to be applicable in PEMFC.

APPLIED ENERGY (2023)

添加到收藏夹

Review Green & Sustainable Science & Technology

Investigation of optimization and evaluation criteria for flow field in proton exchange membrane fuel cell: A critical review

Yu Zhou et al.

Summary: The optimal design of the flow field is crucial for enhancing the performance and commercial application of PEMFCs. Evaluating the design criteria is the mainstream approach to judge the water-gas transport characteristics of flow fields. This paper reviews the current state of research on PEMFC flow field optimization design, emphasizes the use of multiple evaluation criteria, and aims to achieve standardized, integrated, and commercialized design of flow field plates (FFPs).

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2023)

添加到收藏夹

Article Energy & Fuels

Numerical Investigation of Tapered Flow Field Configurations for Enhanced Polymer Electrolyte Membrane Fuel Cell Performance

Yulin Wang et al.

Summary: The study proposed a tapered flow field configuration to enhance the performance of polymer electrolyte membrane fuel cells by improving oxygen transport and water removal. Numerical investigations showed that different LI/O ratios had varying effects on oxygen transport, water removal, and overall cell performance, with an optimal design exhibiting more uniform distributions and improved performance.

APPLIED ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Current density and temperature distribution measurement and homogeneity analysis for a large-area proton exchange membrane fuel cell

Tianwei Miao et al.

Summary: The study investigates the local current density (LCD) and temperature distributions of a PEMFC with different cathode flow fields, and introduces a homogeneity parameter to evaluate the uniformity of LCD distribution. Results show that the cell with dot-parallel flow field performs better in terms of performance and LCD distribution uniformity. Temperature distribution is generally positively correlated with LCD distribution. Increasing cathode stoichiometry can effectively improve LCD distribution uniformity and mitigate local oxygen starvation at high loads.

ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Multi-sub-inlets at cathode flow-field plate for current density homogenization and enhancement of PEM fuel cells in low relative humidity

Yulin Wang et al.

Summary: This article investigates the use of multi-sub-inlet designs on the cathode flow-field plate of a polymer electrolyte membrane fuel cell to improve current density uniformity and overall cell performance. The results show that compared to conventional designs, the multi-sub-inlet design can improve oxygen distribution, enhance water removal capacity, and maintain a low pressure drop, leading to improved cell performance. Additionally, increasing the flow rate of the sub-inlets can further enhance the maximum power density while maintaining oxygen distribution uniformity.

ENERGY CONVERSION AND MANAGEMENT (2022)

添加到收藏夹

Article Chemistry, Physical

Performance study on a large-scale proton exchange membrane fuel cell with cooling

Zhang Yong et al.

Summary: The study investigates the limitations of PEMFC output performance due to operating conditions, proposing a method to optimize gas distribution in the flow field. Results show that increasing operating pressure significantly improves PEMFC performance, and aligning the cooling flow direction with oxygen benefits performance enhancement.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Engineering, Chemical

Reinforcement of proton-exchange membrane fuel cell performance through a novel flow field design with auxiliary channels and a hole array

Yulin Wang et al.

Summary: The novel design utilizing ribs with auxiliary channels and hole arrays improves flow field performance. Numerical simulations show that optimizing flow field geometry can further enhance cell performance and current uniformity.

AICHE JOURNAL (2022)

添加到收藏夹

Article Thermodynamics

Three-dimensional numerical study of a cathode gas diffusion layer with a through/in plane synergetic gradient porosity distribution for PEM fuel cells

Yong Wang et al.

Summary: This study proposes a novel gradient porosity distribution technology in the cathode gas diffusion layer of a polymer electrolyte membrane fuel cell to enhance mass transfer and water removal. The results show that this technology has a greater advantage in improving cell performance and achieving more uniform internal physical quantity profiles.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Energy & Fuels

Lattice Boltzmann simulation of a gas diffusion layer with a gradient polytetrafluoroethylene distribution for a proton exchange membrane fuel cell

Yulin Wang et al.

Summary: In this study, the influence of polytetrafluoroethylene content and distribution on liquid transport behaviors in gas diffusion layers and the performance of proton exchange membrane fuel cells was investigated. The results indicate that an increased content of polytetrafluoroethylene favors liquid removal, but an extremely high content could weaken cell performance. Additionally, a reasonably higher polytetrafluoroethylene content in the inlet region of the gas diffusion layer benefits water drainage enhancement.

APPLIED ENERGY (2022)

添加到收藏夹

Article Energy & Fuels

Experimental study on the dynamic performance of a power system with dual air-cooled PEMFC stacks

Jun Shen et al.

Summary: Air-cooled proton exchange membrane fuel cell (PEMFC) system is considered a reliable power source for backup and emergency power. The experimental results show that the stacks perform better under low air flow rate and rapid loading process. Furthermore, more stringent requirements for thermal management, water management, and flow distribution are needed at high current densities.

APPLIED ENERGY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Optimal design of a cathode flow field with a new arrangement of baffle plates for a high clean power generation of a polymer electrolyte membrane fuel cell

Yulin Wang et al.

Summary: This study evaluates the effects of newly designed baffle plates with different parameters on the performance and characteristics of a fuel cell. The results show that these baffle plates significantly improve oxygen diffusion and water transport, leading to higher power density and energy efficiency of the fuel cell.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Optimization of serpentine flow field in proton-exchange membrane fuel cell under the effects of external factors

Linlin Zhang et al.

Summary: This paper explores the effects of various factors on the performance of PEMFC with serpentine flow field, and optimizes the combination of structural parameters and external factors to improve performance. The study found that 8-channel complex SFF is the best channel pattern, and the optimal width-depth combination is 1.2 mm wide and 0.8 mm deep. GDL porosity plays a significant role in affecting the water distribution, current density distribution, and oxygen distribution of SFF PEMFC.

ALEXANDRIA ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Thermodynamics

Bio-inspired design of an auxiliary fishbone-shaped cathode flow field pattern for polymer electrolyte membrane fuel cells

Yulin Wang et al.

Summary: The bio-inspired auxiliary fishbone-shaped flow field pattern in fuel cells significantly enhances under-rib mass transport and water removal, improving fuel efficiency and operational stability. However, a balance between increased number and width of sub-branch channels for better transport and potential higher electrical contact resistance needs to be considered.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Thermodynamics

Geometry optimization of a novel M-like flow field in a proton exchange membrane fuel cell

Chen Yang et al.

Summary: Numerical simulations showed that the M-like channel performs better in terms of uniform oxygen distribution and higher reactant participation in proton exchange membrane fuel cells compared to the conventional parallel channel. Utilization of an effective evaluation criterion further confirmed that the M-like channel has better overall performance, particularly in mass transfer efficiency, without the drawback of high pressure drop.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Energy & Fuels

Numerical Analysis of the Influence of Different Flow Patterns on Power and Reactant Transmission in Tubular-Shaped PEMFC

Lei Yuan et al.

Summary: This study investigates the influence of different flow patterns on the performance of tubular PEMFCs. The results show that the counter-flow mode performs better than the co-flow mode and provides more power. The square PEMFC with a counter-flow pattern has the highest predicted net power.

ENERGIES (2021)

添加到收藏夹

Article Thermodynamics

Performance enhancement in a proton exchange membrane fuel cell with a novel 3D flow field

Jun Shen et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Partial flooding and its effect on the performance of a proton exchange membrane fuel cell

Jun Shen et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Chemistry, Physical

Numerical and experimental investigation of baffle plate arrangement on proton exchange membrane fuel cell performance

Xuefeng Wang et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Thermodynamics

Evaluation criterion of different flow field patterns in a proton exchange membrane fuel cell

Jun Shen et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Chemistry, Physical

Reviews on the effects of contaminations and research methodologies for PEMFC

Yinqi Zhao et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

3D+1D modeling approach toward large-scale PEM fuel cell simulation and partitioned optimization study on flow field

Biao Xie et al.

ETRANSPORTATION (2020)

添加到收藏夹

Article Thermodynamics

Enhancement of mass transfer in a proton exchange membrane fuel cell with blockage in the flow channel

Jun Shen et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Large-scale multi-phase simulation of proton exchange membrane fuel cell

Guobin Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Three-dimensional multiphase model of proton exchange membrane fuel cell with honeycomb flow field at the cathode side

Seyed Ali Atyabi et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Thermodynamics

Experimental analysis of PEM fuel cell performance using lung channel design bipolar plate

Srinivasa Reddy Badduri et al.

INTERNATIONAL JOURNAL OF GREEN ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Experimental and numerical investigation of obstacle effect on the performance of PEM fuel cell

A. A. Ebrahimzadeh et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Chemistry, Physical

A novel polymer electrolyte fuel cell flow-field: The through-plane array

Michael Whiteley et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Proceedings Paper Energy & Fuels

Performance Enhancements of PEM Fuel Cells with Narrower Outlet Channels in Interdigitated Flow Field

Xuyang Zhang et al.

INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS (2019)

添加到收藏夹

Proceedings Paper Engineering, Multidisciplinary

The effect of mother channel width on biometric flow field towards polymer electrolyte membrane fuel cell performance

A. Fahruddin et al.

4TH ANNUAL APPLIED SCIENCE AND ENGINEERING CONFERENCE, 2019 (2019)

添加到收藏夹

Article Thermodynamics

Optimization design of the cathode flow channel for proton exchange membrane fuel cells

Linhao Fan et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Chemistry, Physical

Numerical study of a new cathode flow-field design with a sub-channel for a parallel flow-field polymer electrolyte membrane fuel cell

Yulin Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

Numerical investigation on the characteristics of mass transport and performance of PEMFC with baffle plates installed in the flow channel

Yan Yin et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

添加到收藏夹

Article Thermodynamics

Channel to rib width ratio influence with various flow field designs on performance of PEM fuel cell

Youcef Kerkoub et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Energy & Fuels

Multi-phase simulation of proton exchange membrane fuel cell with 3D fine mesh flow field

Guobin Zhang et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2018)

添加到收藏夹

Article Thermodynamics

Characteristics of PEMFC operating at high current density with low external humidification

Linhao Fan et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

添加到收藏夹

Article Thermodynamics

Investigation of the performance improvement in decreasing aspect ratio interdigitated flow field PEMFCs

Nathanial J. Cooper et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

添加到收藏夹

Article Energy & Fuels

Design and simulation of a novel bipolar plate based on lung-shaped bio-inspired flow pattern for PEM fuel cell

Mostafa Asadzade et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2017)

添加到收藏夹

Article Chemistry, Physical

Numerical analysis of modified parallel flow field designs for fuel cells

B. H. Lim et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Article Electrochemistry

Macro-Scale Analysis of Large Scale PEM Fuel Cell Flow-Fields for Automotive Applications

S. Shimpalee et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

添加到收藏夹

Article Chemistry, Physical

Experimental optimization of parallel and interdigitated PEMFC flow-field channel geometry

Nathanial J. Cooper et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

添加到收藏夹

Article Chemistry, Physical

Simulation and study of proposed modifications over straight-parallel flow field design

Gerardo Martin Imbrioscia et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

添加到收藏夹

Article Energy & Fuels

Numerical investigation of the coupled water and thermal management in PEM fuel cell

Tao-Feng Cao et al.

APPLIED ENERGY (2013)

添加到收藏夹

Article Chemistry, Physical

Influences of operational factors on proton exchange membrane fuel cell performance with modified interdigitated flow field design

Hui-Wen Ku et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Energy & Fuels

Experimental and numerical study of proton exchange membrane fuel cell with spiral flow channels

Jiin-Yuh Jang et al.

APPLIED ENERGY (2012)

添加到收藏夹

Article Thermodynamics

A PEM fuel cell with metal foam as flow distributor

Chung-Jen Tseng et al.

ENERGY CONVERSION AND MANAGEMENT (2012)

添加到收藏夹

Article Chemistry, Physical

Development of a novel radial cathode flow field for PEMFC

B. R. Friess et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

添加到收藏夹

Article Chemistry, Physical

Experimental investigation of the effect of channel length on performance and water accumulation in a PEMFC parallel flow field

John Bachman et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

添加到收藏夹

Article Green & Sustainable Science & Technology

Simulation of an innovative flow-field design based on a bio inspired pattern for PEM fuel cells

R. Roshandel et al.

RENEWABLE ENERGY (2012)

添加到收藏夹

Article Energy & Fuels

A comprehensive, consistent and systematic mathematical model of PEM fuel cells

J. J. Baschuk et al.

APPLIED ENERGY (2009)

添加到收藏夹

Article Chemistry, Physical

Investigation of water droplet kinetics and optimization of channel geometry for PEM fuel cell cathodes

Nawaz Akhtar et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)

添加到收藏夹

Article Electrochemistry

Effects of flow channel geometry on cell performance for PEM fuel cells with parallel and interdigitated flow fields

Xiao-Dong Wang et al.

ELECTROCHIMICA ACTA (2008)

添加到收藏夹

Article Chemistry, Physical

Effects of channel geometrical configuration and shoulder width on PEMFC performance at high current density

Dewan Hasan Ahmed et al.

JOURNAL OF POWER SOURCES (2006)

添加到收藏夹

Article Chemistry, Physical

Experimental study on the performance of PEM fuel cells with interdigitated flow channels

Wei-Mon Yan et al.

JOURNAL OF POWER SOURCES (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.