4.7 Article

Bamboo-like tubular nitrogen-doped carbon derived from g-C3N4 as an ultra-high performance anode of potassium-ion battery

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Highly Flexible Carbon Film Implanted with Single-Atomic Zn-N2 Moiety for Long-Life Sodium-Sulfur Batteries

Ge Yao et al.

Summary: In this study, a flexible carbon film implanted with single-atomic Zn-N-2 moiety was constructed as an efficient sulfur host material to improve the redox kinetics and electrical conductivity of sulfur cathode in room-temperature sodium-sulfur batteries.

ADVANCED FUNCTIONAL MATERIALS (2023)

Article Materials Science, Multidisciplinary

Design of multifunctional graphene oxide-modified nanofiber film with heterostructure (ZnS-CoS@GO@CNFs) for long-term stable potassium ion storage

Yukang Lou et al.

Summary: In this study, multifunctional graphene oxide (GO) was used to control the diameter and distribution of nanoparticles in composite fibers, improving conductivity and tensile deformation. The composite material showed excellent rate performance and cyclic stability as an anode for potassium ion batteries. When used as a self-supporting anode, the nanofiber film maintained stable capacity output.

SCIENCE CHINA-MATERIALS (2023)

Article Chemistry, Physical

The g-C3N4-derived nanoarchitectonics of nitrogen-doped carbon material as a high-rate performance anode for potassium ion batteries

Shasha Wang et al.

Summary: Due to its abundant precursors, simple preparation, and environmental friendliness, nitrogen-doped carbon is regarded as a promising anode material for potassium-ion batteries (PIBs). In this study, nitrogen-doped carbon material (NC-2) was synthesized using exfoliated g-C3N4 as a precursor, combined with sucrose, and subjected to hydrothermal and high-temperature pyrolysis. NC-2 exhibited a high nitrogen content, porous layered structure, and large interlayer spacing. As the anode for PIBs, NC-2 demonstrated a high reversible capacity of 261.07 mAh g-1 at 0.1 A g-1 and an impressive rate performance of 153.36 mAh g-1 at 2 A g-1. The excellent performance of NC-2 can be attributed to its porous layered structure, enlarged interlayer spacing promoting ion diffusion, and the presence of abundant active sites due to nitrogen doping. These results indicate the great potential of NC-2 as a PIBs anode material.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Article Electrochemistry

Single-crystalline Mn-based oxide as a high-rate and long-life cathode material for potassium-ion battery

Jiarui Lv et al.

Summary: Designing and synthesizing single-crystal manganese-based layered oxide can enhance the rate capability and cycling stability of potassium-ion batteries.

ESCIENCE (2023)

Article Chemistry, Multidisciplinary

Heterogeneous MoSe2/Nitrogen-Doped-Carbon Nanoarrays: Engineering Atomic Interface for Potassium-Ion Storage

Da Xu et al.

Summary: The heterogeneous MoSe2/N-doped carbon nanoarrays demonstrate excellent performance as KIBs anode materials, with enhanced K-ion diffusion and improved electrochemical reversibility, resulting in unprecedented K-ion storage performance with high capacity retention over cycles.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Engineering, Environmental

Synthesis of presodiated B, N Co-doped carbon materials and application in sodium ions batteries with enhanced initial coulombic efficiency

Yihua Tang et al.

Summary: This study presents a novel approach to achieve simultaneous presodiation and B, N co-doping within carbon materials, leading to promising Na+ storage capability and enhanced initial Coulombic efficiency (ICE) up to 96.1%.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Energy & Fuels

One-pot synthesis of SnS2 Nanosheets supported on g-C3N4 as high capacity and stable cycling anode for sodium-ion batteries

Ha Tran Huu et al.

Summary: In this study, SnS2 nanosheets were synthesized and grafted onto porous g-C3N4 as an anode active material for sodium-ion batteries. The composites showed outstanding performance in terms of high capacity and ultralong cycling stability, attributed to the presence of g-C3N4 relieving strains induced by volume variation of SnS2 and enhanced transport of electrons and sodium ions.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Article Nanoscience & Nanotechnology

Design of Flexible Films Based on Kinked Carbon Nanofibers for High Rate and Stable Potassium-Ion Storage

Qiaotian Xiong et al.

Summary: This study focuses on designing porous and entangled network structures for sulfur-/nitrogen-co-doped kinked carbon nanofibers (S/N-KCNFs) to achieve high flexibility and rate capacities. The synthesized nanofiber films exhibited excellent rate performance and capacity retention, showcasing a new strategy for flexible structure design of high-performance potassium-ion storage materials.

NANO-MICRO LETTERS (2022)

Article Multidisciplinary Sciences

Boosting the potassium-ion storage performance enabled by engineering of hierarchical MoSSe nanosheets modified with carbon on porous carbon sphere

Mengting Cai et al.

Summary: This study reports a hierarchically structured superior anode material that significantly enhances the performance of potassium-ion batteries. The anode, consisting of assembled MoSSe nanosheets anchored on a porous carbon sphere and encapsulated within a thin carbon layer, exhibits high reversible capacity, good rate capability, and superior cyclic performance due to expanded interlayer spacing, abundant anion vacancies, and the protective and conductive properties of the carbon layers.

SCIENCE BULLETIN (2022)

Article Materials Science, Multidisciplinary

Walnut septum-derived hierarchical porous carbon for ultra-high-performance supercapacitors

Meng Zhou et al.

Summary: This study presents a green method to prepare porous active carbon from walnut septum as electrode materials for supercapacitors. The effects of chemical etching reagent on the microstructure and specific capacitance of the porous carbon are explored. The results show that walnut septum is a promising precursor for activated carbons, and the large mesoporosity after activation effectively boosts the electrochemical properties of supercapacitors.

RARE METALS (2022)

Article Chemistry, Physical

N-doped carbon dots decorated 3D g-C3N4 for visible-light driven peroxydisulfate activation: Insights of non-radical route induced by Na plus doping

Xiaomei Liu et al.

Summary: A novel material, N-doped carbon dots decorated three-dimensional graphitic carbon nitride (NCDs/TCN), is synthesized and used for the activation of peroxydisulfate (PDS). Experimental and theoretical results demonstrate that this material can activate PDS through both radical and non-radical pathways, showing improved photocatalytic performance.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Electrochemistry

Regulating the sodium storage sites in nitrogen-doped carbon materials by sulfur-doping engineering for sodium ion batteries

Gaohui Ding et al.

Summary: This study used a S-doping strategy to expand the interlayer distance of carbon materials and optimize doping sites, resulting in a sample NSCRs with high reversible capacity and ultra-long cycling stability. Theoretical simulation and full-cell performance confirmed the potential of NSCRs in sodium ion batteries.

ELECTROCHIMICA ACTA (2022)

Article Chemistry, Physical

Biomass CQDs derivate carbon as high-performance anode for K-ion battery

Dengyang Wang et al.

Summary: Carbon quantum dots (CQDs), a multifunctional carbon nanomaterial, have attracted great attention in the field of energy due to their quantum size, various functional groups, and unique physicochemical properties. In this study, CQDs were prepared from soybean using a simple hydrothermal method and then transformed into different carbon materials. Among them, honeycomb carbon showed excellent potassium ion storage performance and potassium ion diffusion characteristics, demonstrating great potential as an anode material for potassium ion batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Multidisciplinary Sciences

Fast hydrogen purification through graphitic carbon nitride nanosheet membranes

Yisa Zhou et al.

Summary: This study presents the use of lamellar g-C3N4 nanosheets with a disordered layer-stacking structure as gas separation membranes. The high-quality nanosheets enable fast and highly selective transport through high-density sieving channels and interlayer paths, resulting in high permeance and excellent stability under harsh environments.

NATURE COMMUNICATIONS (2022)

Review Materials Science, Multidisciplinary

A review of hard carbon anode: Rational design and advanced characterization in potassium ion batteries

Hang Lei et al.

Summary: K-ion batteries (KIBs) have gained significant attention for their low cost, high operating voltage, and similarity to Li-ion batteries. This review focuses on the electrochemical reaction mechanism of hard carbons (HCs) in KIBs and summarizes approaches to improve the electrochemical performance of HC-based materials. The review also highlights advanced in situ characterization methods for understanding the evolutionary process of potassiation-depotassiation, essential for optimizing the electrochemical performance of KIBs.

INFOMAT (2022)

Article Chemistry, Physical

Constructing high-rate and long-life phosphorus/carbon anodes for potassium-ion batteries through rational nanoconfinement

Wei Xiao et al.

Summary: Encapsulating phosphorus nanoparticles into commercial porous carbon improves the stability and performance of potassium-ion batteries. The phosphorus/carbon anode material with an appropriate phosphorus content shows large initial charging capacity, highly reversible capacity, and superior rate capability. The capacitive intercalation/extraction of K+ in the carbon nanostructure significantly boosts the charge storage process and enhances the electrochemical performance of the phosphorus/carbon anode.

NANO ENERGY (2021)

Article Chemistry, Physical

Construction of NiS Nanosheets Anchored on the Inner Surface of Nitrogen-Doped Hollow Carbon Matrixes with Enhanced Sodium and Potassium Storage Performances

Shikai Xu et al.

Summary: In this study, NiS nanosheets attached to nitrogen-doped carbon matrixes were prepared for sodium/potassium ion batteries, demonstrating excellent electrochemical performance and cycling stability. The composite material showed promising application potential for energy-storage devices.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Nitrogen-doped hollow carbon spheres synthesized from solid precursor and its application in lithium ions batteries

Yihua Tang et al.

Summary: Highly nitrogen-doped hollow carbon spheres (HCSs) were successfully synthesized using solid graphitic carbon nitride (g-C3N4) precursor as carbon and nitrogen sources, showing promising lithium ion storage performances as anode materials in lithium ion batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Multidisciplinary

Exceptional Cocatalyst-Free Photo-Enhanced Piezocatalytic Hydrogen Evolution of Carbon Nitride Nanosheets from Strong In-Plane Polarization

Cheng Hu et al.

Summary: Utilizing the piezocatalytic and photo-enhanced properties of graphitic carbon nitride, this work significantly improves the efficiency of hydrogen production. It not only demonstrates the potential of g-C3N4 as a piezo-semiconductor for catalyzing H-2 evolution, but also paves the way for converting solar and mechanical energy through photo-mediated piezocatalytic reactions.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Facile synthesis of SnS2@g-C3N4 composites as high performance anodes for lithium ion batteries

Ha Tran Huu et al.

Summary: This study successfully applied a solid state reaction to synthesize SnS2@g-C3N4 composites, comprising SnS2 nanosheets dispersed in a porous g-C3N4 matrix. The significant improvement in specific capacity, rated performance, and cycling behavior of the composites was attributed to the buffering effect of the large-surface-area g-C3N4 matrix and the pseudocapacitive effect. Enhanced mobility of charge carriers was achieved through the high exfoliation of SnS2 nanosheets, the high porosity of the composites, and the formation of heterointerfaces between SnS2 and g-C3N4 semiconductors, generating an internal electric field that accelerated the migration of electrons and lithium ions.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

The creation of extra storage capacity in nitrogen-doped porous carbon as high-stable potassium-ion battery anodes

Shikai Xu et al.

Summary: The porous carbonaceous materials with interconnected nanopores modified by abundant edge-doped nitrogen atoms exhibit outstanding potassium-storage performance, achieving high reversible capacity, excellent rate capability, and remarkable long-term cycling stability. The presence of nitrogen atoms doped on the edge of defects facilitates the sorption of potassium ions, providing extra capacity for potassium-ion batteries.

CARBON (2021)

Article Materials Science, Multidisciplinary

Biocarbon with different microstructures derived from corn husks and their potassium storage properties

Meng Zhou et al.

Summary: Biocarbon prepared from corn husks was used as anode material for potassium ion batteries, with the sample prepared at 1300 degrees Celsius showing the best electrochemical performance. The biocarbon exhibited higher graphitic degree and lower surface defects, leading to stable reversible capacity during cycling tests.

RARE METALS (2021)

Article Chemistry, Physical

Rational design of carbon anodes by catalytic pyrolysis of graphitic carbon nitride for efficient storage of Na and K mobile ions

Wenli Zhang et al.

Summary: By catalytic pyrolysis of graphitic carbon nitride enabled by metal cyanamides, a high edge-nitrogen doped three-dimensional turbostratic carbon material has been synthesized, exhibiting promising performance as anodes for both PIBs and SIBs.

NANO ENERGY (2021)

Article Chemistry, Multidisciplinary

Boosting the K+-adsorption capacity in edge-nitrogen doped hierarchically porous carbon spheres for ultrastable potassium ion battery anodes

Yang Xu et al.

Summary: The designed edge-nitrogen doped carbon material with hierarchically porous structure achieved high potassium storage properties, attributed to the synergistic effect of edge-nitrogen induced active sites and hierarchical porous structure.

NANOSCALE (2021)

Article Chemistry, Inorganic & Nuclear

Hierarchical interlayer-expanded MoSe2/N-C nanorods for high-rate and long-life sodium and potassium-ion batteries

Xueqian Zhang et al.

Summary: A hierarchical MoSe2/N-C nanorod with expanded interlayer spacing was synthesized in this study, which showed enhanced diffusion kinetics of Na+ and K+ ions and buffered volume expansion during charging/discharging process, maintaining the structural integrity of MoSe2. As a result, the MoSe2/N-C exhibited long cycle performance and high rate capability for both sodium and potassium storage.

INORGANIC CHEMISTRY FRONTIERS (2021)

Article Chemistry, Multidisciplinary

A Site-Selective Doping Strategy of Carbon Anodes with Remarkable K-Ion Storage Capacity

Wenli Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Physical

Energy Storage Mechanisms in High-Capacity Graphitic C3N4 Cathodes for Al-Ion Batteries

Chengsi Pan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Article Materials Science, Multidisciplinary

Nitrogen Deficient Graphitic Carbon Nitride as Anodes for Lithium-ion Batteries

Xianxian Li et al.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2020)

Article Chemistry, Multidisciplinary

Facile Preparation of High-Content N-Doped CNT Microspheres for High-Performance Lithium Storage

Jianli Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Carbon Nitride Transforms into a High Lithium Storage Capacity Nitrogen-Rich Carbon

Joshua P. Pender et al.

ACS NANO (2019)

Article Chemistry, Physical

Ultrahigh Nitrogen Doping of Carbon Nanosheets for High Capacity and Long Cycling Potassium Ion Storage

Xingqi Chang et al.

ADVANCED ENERGY MATERIALS (2019)

Article Chemistry, Physical

Short-Range Order in Mesoporous Carbon Boosts Potassium-Ion Battery Performance

Wei Wang et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Physical

Nitrogen-doped bamboo-like carbon nanotubes as anode material for high performance potassium ion batteries

Yanzhen Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Nanoscience & Nanotechnology

Polynanocrystalline Graphite: A New Carbon Anode with Superior Cycling Performance for K-Ion Batteries

Zhenyu Xing et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Chemistry, Physical

Review on recent advances in nitrogen-doped carbons: preparations and applications in supercapacitors

Yuanfu Deng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Nanoscience & Nanotechnology

Carbon Nitrogen Nanotubes as Efficient Bifunctional Electrocatalysts for Oxygen Reduction and Evolution Reactions

Ram Manohar Yadav et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Chemistry, Physical

Heterogeneous catalysis model of growth mechanisms of carbon nanotubes, graphene and silicon nanowires

John Robertson

JOURNAL OF MATERIALS CHEMISTRY (2012)

Review Chemistry, Physical

A review of application of carbon nanotubes for lithium ion battery anode material

Charles de las Casas et al.

JOURNAL OF POWER SOURCES (2012)