4.7 Article

Regulation of the pore structure of carbon nanosheets based electrocatalyst for efficient polysulfides phase conversions

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Multidisciplinary

Synergistic engineering of cobalt selenide and biomass-derived S, N, P co-doped hierarchical porous carbon for modulation of stable Li-S batteries

Yang Lin et al.

Summary: In this study, a strong-polar/weak-polar composite material was prepared by introducing cobalt ions and selenizing on the surface of biomass-derived porous carbon, which exhibits excellent rate performance and cycling stability in lithium-sulfur batteries.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Article Materials Science, Multidisciplinary

Enhanced multiple anchoring and catalytic conversion of polysulfides by SnO 2-decorated MoS 2 hollow microspheres for high-performance lithium-sulfur batteries

Yun Tian et al.

Summary: The SnO2-decorated MoS2 hollow microspheres (SnO2-MoS2 HMSs) exhibit a unique hollow structure that accommodates a large amount of sulfur and effectively adapts to volume expansion. Additionally, the SnO2 nanoparticles on the MoS2 surface accelerate catalysis and enhance bonding strength with polysulfide intermediates, inhibiting the shuttle effect. The newly synthesized SnO2-MoS2 HMSs cathode shows excellent electrochemical performance, with a high capacity retention rate after 100 cycles.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

Oxidized Nb2C MXene as catalysts for lithium-sulfur batteries: Mitigating the shuttle phenomenon by facilitating catalytic conversion of lithium polysulfides

Cailing Song et al.

Summary: In this study, oxidized Nb2C MXene with amorphous carbon (Nb2O5/C) composites were designed as sulfur hosts for lithium-sulfur batteries. The composites showed a remarkable improvement in the electrochemical performance of the batteries by effectively mitigating the shuttle phenomenon and accelerating the conversion of lithium polysulfide intermediates.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Nanoscience & Nanotechnology

Metal-Organic Framework-Derived NiSe2 Nanoparticles on Graphene for Polysulfide Conversion in Lithium-Sulfur Batteries

Xiaoshan Shi et al.

Summary: The rechargeable lithium-sulfur battery, known for its high energy density and low-cost materials, still faces challenges such as the polysulfide shuttle effect. In this study, a modified separator was designed and fabricated using graphene-supported NiSe2 nanoparticles derived from metal-organic frameworks. The NiSe2 nanoparticles effectively adsorb polysulfides and accelerate their conversion, while also providing abundant active sites.

ACS APPLIED NANO MATERIALS (2022)

Article Materials Science, Multidisciplinary

Phosphorus modulated porous CeO 2 nanocrystallines for accelerated polysulfide catalysis in advanced Li-S batteries

Xuefeng Tao et al.

Summary: This study demonstrates a rational strategy to accelerate the polysulfide catalysis in Li-S batteries by constructing phosphorus-modulated porous CeO2, leading to improved battery performance and cycle stability.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

Defect-rich porous tubular graphitic carbon nitride with strong adsorption towards lithium polysulfides for high-performance lithium-sulfur batteries

Heng Ma et al.

Summary: In this study, porous tubular graphitic carbon nitride (PTCN) with hollow nanotube tentacles and mesopores was synthesized as the sulfur host material. The unique structure of PTCN provides abundant active interfaces and excellent conductivity, leading to high-performance lithium-sulfur batteries.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

MOFs derived ZnSe/N-doped carbon nanosheets as multifunctional interlayers for ultralong-Life lithium-sulfur batteries

Biao Wang et al.

Summary: By designing and synthesizing zinc selenide/nitrogen-doped carbon nanosheets, a multifunctional low-cost and high-performance separator for lithium-sulfur batteries has been successfully developed, which can improve the cycle life and areal capacity of the battery, as well as accelerate the redox kinetics of lithium polysulfides.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Chemistry, Physical

Electronic structure adjustment of lithium sulfide by a single-atom copper catalyst toward high-rate lithium-sulfur batteries

Ru Xiao et al.

Summary: By adjusting the electronic structure of the catalyst, this study improved the coverage of Li2S products on catalytic sites during discharge. It was found that using single-atom copper as a catalyst can achieve control over the adsorbed Li2S electronic structure and form 3D spherical clusters of Li2S nuclei on SA-Cu decorated carbon fiber foam. This design demonstrates the importance of catalyst design in adjusting the adsorbed Li2S electronic structure for developing high-rate and long-life Li-S batteries.

ENERGY STORAGE MATERIALS (2022)

Article Materials Science, Multidisciplinary

Enhanced multiple anchoring and catalytic conversion of polysulfides by SnO2-decorated MoS2 hollow microspheres for high-performance lithium-sulfur batteries

Yun Tian et al.

Summary: This study presents a novel sulfur host material of SnO2-decorated MoS2 hollow microspheres, which effectively addresses the issues of Lithium-Sulfur batteries during the charge/discharge cycle process, achieving excellent electrochemical performance.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

MoP QDs@graphene as highly efficient electrocatalyst for polysulfide conversion in Li-S batteries

Bo Yu et al.

Summary: The study presents MoP quantum dots anchored N, P-doped graphene as a multifunctional cathode for lithium-sulfur batteries, which accelerates electron transfer and provides catalytically active sites, enhancing electrochemical performance and cycling stability.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Physical

Bio-inspired construction of electrocatalyst decorated hierarchical porous carbon nanoreactors with enhanced mass transfer ability towards rapid polysulfide redox reactions

Shijie Zhang et al.

Summary: The bio-inspired strategy of constructing ant-nest-like hierarchical porous ultrathin carbon nanosheet networks with metallic nanoparticles electrocatalysts (HPC-MEC) efficiently enables rapid mass transfer in Li-S batteries. This helps anchor polysulfides, promote sulfur species conversions, and increase sulfur utilization, contributing to high battery performance. For example, cobalt embedded hierarchical porous carbon (HPC-Co) demonstrates remarkably high specific capacity, excellent rate performance, and high area capacity even at high sulfur loads and low electrolyte/sulfur ratios.

NANO RESEARCH (2021)

Article Chemistry, Physical

Interfaces-dominated Li2S nucleation behavior enabled by heterostructure catalyst for fast kinetics Li-S batteries

Da-Qian Cai et al.

Summary: In this study, MoO2/alpha-MoC nanocomposite was used as a multifunctional electrocatalyst to address the issues of soluble intermediate lithium polysulfides (LiPSs) shuttling and uncontrollable deposition of Li2S in lithium-sulfur batteries (LSBs). The use of MoO2/alpha-MoC interlayer enabled the LSBs to exhibit excellent rate performance, promising cycling stability, and a high specific capacity.

NANO ENERGY (2021)

Article Materials Science, Multidisciplinary

Nickel embedded porous macrocellular carbon derived from popcorn as sulfur host for high-performance lithium-sulfur batteries

Wenjuan Wang et al.

Summary: In this study, a unique three-dimensional interconnected macrocellular porous carbon structure decorated with metal Ni nanoparticles was synthesized to address the issues of poor conductivity of sulfur and critical cyclability problems, resulting in the fabrication of high-performance Li-S batteries.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Physical

Multi-scale uniform Li regulation triggered by tunable electric field distribution on oxygen-functionalized porous framework for flexible Li-S full batteries

Yue Ouyang et al.

Summary: This study presents an oxygen-functionalized mesoporous carbon nanofiber framework for dendrite-free lithium metal anode and stable sulfur cathode in Li-S batteries. The flexible Li-S full battery exhibits remarkable electrochemical performance with high rate capability and low capacity decay rate, paving the way for practical applications in flexible energy storage devices.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Synergistic effect of Co3Fe7 alloy and N-doped hollow carbon spheres with high activity and stability for high-performance lithium-sulfur batteries

Zhonghao Gu et al.

Summary: The CoFe/NHCS composite material demonstrates superior electrocatalytic performance and excellent conversion efficiency towards polysulfides, promoting redox reactions and inhibiting shuttle effect of polysulfides. Through structural and chemical property modulation, it achieves good cycling stability and high energy density for Li-S batteries.

NANO ENERGY (2021)

Article Nanoscience & Nanotechnology

Single-Atom Coated Separator for Robust Lithium-Sulfur Batteries

Kun Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Review Chemistry, Multidisciplinary

More Reliable Lithium-Sulfur Batteries: Status, Solutions and Prospects

Ruopian Fang et al.

ADVANCED MATERIALS (2017)

Article Chemistry, Multidisciplinary

A Flexible Sulfur-Graphene-Polypropylene Separator Integrated Electrode for Advanced Li-S Batteries

Guangmin Zhou et al.

ADVANCED MATERIALS (2015)