☆ 4.7 Article

Fabrication of polymer-derived SiBCN ceramic temperature sensor with excellent sensing performance

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Ceramics

Novel lightweight and efficient electromagnetic waves absorbing performance of biomass porous carbon/polymer-derived composite ceramics

Jie Liu et al.

Summary: A lightweight and efficient electromagnetic waves absorbing material, the biomass porous carbon/polymer-derived composite ceramics, was prepared using sorghum straw as the matrix and combining acetylacetone nickel and polysilazane. The addition of 2% acetylacetone nickel and 30% filler content resulted in strong response to electromagnetic waves. The material exhibited a minimum reflection loss of -69.44 dB at a thickness of 1.33 mm and an effective absorption bandwidth of 4.27 GHz (13.73-18 GHz) at 1.49 mm. The introduction of Ni2Si effectively adjusted impedance matching and enhanced the electromagnetic wave absorbing properties.

CERAMICS INTERNATIONAL (2023)

添加到收藏夹

Article Engineering, Environmental

Lightweight and geometrically complex ceramics derived from 4D printed shape memory precursor with reconfigurability and programmability for sensing and actuation applications

Siyao Chen et al.

Summary: There is growing interest in additive manufacturing (AM) of ceramics due to the feasibility of achieving complex shapes. Polymer-derived ceramics (PDCs) offer advantages for ceramic AM, but the potential of preceramic polymers is not fully utilized. This study synthesized a multifunctional preceramic polymer composite with reconfigurability and shape memory effect, allowing 4D printing of lightweight self-shaping ceramics with complex geometries. The resulting ceramics showed semiconducting behavior and were used to design temperature sensors with reshaping capabilities.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Materials Science, Ceramics

High performance X-band electromagnetic wave absorption of SiBCN metamaterials fabricated by direct pyrolysis

Li Wang et al.

Summary: In this study, electromagnetic wave (EMW)-absorbing ceramic metamaterials without doping absorbers were prepared by direct pyrolysis of polymer-derived SiBCN ceramics (PDC-SiBCN). The pyrolytic behavior of the ceramics, the effect of the pyrolysis temperature on the mechanical strength, and the EMW absorption properties of the metamaterials were investigated. The results demonstrated the optimal impedance matching and absorption performance of PDC-SiBCN at a pyrolysis temperature of 1500 degrees C, and the metamaterial showed efficient absorption of the full X-band when its thickness was within a certain range.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

添加到收藏夹

Article Materials Science, Ceramics

High-temperature electrical properties of polymer-derived ceramic SiBCN thin films fabricated by direct writing

Chao Wu et al.

Summary: In this study, SiBCN thin-film resistance grids were fabricated and tested for their resistance-temperature characteristics, stability, and repeatability in high-temperature environments. The results showed that the SiBCN films exhibited excellent oxidation resistance and electrical conductivity, making them suitable for in situ temperature monitoring of hot components in harsh environments.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Review Materials Science, Ceramics

Si-based polymer-derived ceramics for energy conversion and storage

Qingbo Wen et al.

Summary: This review highlights the recent progress in the field of polymer-derived ceramics (PDCs) for energy conversion and storage applications. It provides a brief introduction to the synthesis, processing, and microstructure characterization of PDCs, and summarizes their various applications in energy conversion systems and energy storage. The review also discusses possible future applications and research directions for PDCs.

JOURNAL OF ADVANCED CERAMICS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Temperature-sensing performance of polymer-derived SiAlCN ceramics up to 1000 °C

Pengfei Shao et al.

Summary: This study addresses the challenge of operating temperature sensors in high-temperature and harsh environments by utilizing polymer-derived SiAlCN ceramics as sensing materials. The SiAlCN ceramic temperature sensor exhibits excellent temperature-sensing properties, including high accuracy, stability, and repeatability up to 1000 degrees C. Moreover, it has a faster response rate compared to traditional thermocouples, making it a promising sensor material for temperature measurement in extreme working conditions.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Materials Science, Ceramics

Thin-film temperature sensor made from particle-filled polymer-derived ceramics pyrolyzed in vacuum

Zaifu Cui et al.

Summary: This study proposes the pyrolysis of polymer-derived ceramics (PDC) thin films in vacuum to solve the oxidation issue and verifies its application in high-temperature sensors. It provides a feasible method for the fabrication of high-temperature PDC thin-film sensors.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Manufacture of Si3N4-SiCN composite bulks with hierarchical pore structure

Duan Li et al.

Summary: Si3N4-SiCN ceramic foams with hierarchical pore architecture were successfully prepared by protein-based gelcasting and precursor infiltration and pyrolysis. The ceramics exhibited low density, high compressive strength, good gas permeability, and showed promise for industrial filtration applications.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Long-term oxidation behavior of C/SiC-SiBCN composites in wet oxygen environment

Xin'gang Luan et al.

Summary: Introducing polymer derived SiBCN ceramic into carbon fiber reinforced SiC composites creates C/SiC-SiBCN composites with favorable wet oxygen oxidation resistance. The oxidation behavior of C/SiC-SiBCN composites is influenced by temperature and the release speed of gas products, and the oxidation mechanism is further explained by comparing with C/SiC-SiBCN composites.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Polymer-derived ceramic thin-film temperature sensor

Zaifu Cui et al.

Summary: This work successfully addresses the monitoring challenges of machines in harsh environments by fabricating an ultra-thin-film temperature sensor, providing a new solution for aerospace applications.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

添加到收藏夹

Review Polymer Science

Polymer Nanocomposites in Sensor Applications: A Review on Present Trends and Future Scope

Prashant Shukla et al.

Summary: Polymer nanocomposites have vast potential in various sensitive sensor applications, offering good processability and exceptional functionalities. The electrical conductance of these materials is influenced by the conductive filler networks within the polymer matrix, allowing for significant variations in output electric signals. Ongoing research is seeking to understand the mechanisms governing the formation of polymer nanocomposites and their stimuli-responsive behavior in sensor applications.

CHINESE JOURNAL OF POLYMER SCIENCE (2021)

添加到收藏夹

Article Materials Science, Ceramics

Fine-diameter Si-B-C-N ceramic fibers enabled by polyborosilazanes with N-methyl pendant group

Xiaoyu Ji et al.

Summary: By creating a class of polyborosilazanes with high spinnability through a facile one-pot synthesis, a trade-off between spinnability and ceramic yield was overcome to fabricate continuous Si-B-C-N fibers with homogeneous diameter, shedding light on the mechanistic impact of pendant groups on the polycondensation, melt spinning, and pyrolyzing process for high-performance nitride ceramic fibers.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

The fate and role of in situ formed carbon in polymer-derived ceramics

Qingbo Wen et al.

PROGRESS IN MATERIALS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Ceramics

Electrospinning preparation and electromagnetic wave absorption properties of SiCN fibers

Feifei Xiao et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Review Engineering, Electrical & Electronic

Review of no-core optical fiber sensor and applications

Yong Zhao et al.

SENSORS AND ACTUATORS A-PHYSICAL (2020)

添加到收藏夹

Review Engineering, Electrical & Electronic

Progress Toward Sapphire Optical Fiber Sensors for High-Temperature Applications

Chen Zhu et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

添加到收藏夹

Article Materials Science, Ceramics

The stability and repeatability of high temperature electrical properties of SiAlCN ceramic sensor heads

Yongdong Yu et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Review Materials Science, Ceramics

Organosilicon polymer-derived ceramics: An overview

Shengyang Fu et al.

JOURNAL OF ADVANCED CERAMICS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Polymer Derived Si-B-C-N Ceramics: 30 Years of Research

Antoine Viard et al.

ADVANCED ENGINEERING MATERIALS (2018)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and electromagnetic wave absorption properties of RGO-SiBCN composites via PDC technology

Chaokun Song et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Ceramics

SiCNO-GO composites with the negative temperature coefficient of resistance for high-temperature sensor applications

Yuxi Yu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis, pyrolysis of a novel liquid SiBCN ceramic precursor and its application in ceramic matrix composites

Hui Zhao et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Quantitative study on structural evolutions and associated energetics in polysilazane-derived amorphous silicon carbonitride ceramics

Yaohan Chen et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Materials Science, Ceramics

Influence of carbon enrichment on electrical conductivity and processing of polycarbosilane derived ceramic for MEMS applications

Federico Dalcanale et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

添加到收藏夹

Article Materials Science, Ceramics

Effect of pyrolysis temperature on the electric conductivity of polymer-derived silicoboron carbonitride

Yaohan Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

添加到收藏夹

Article Engineering, Electrical & Electronic

Temperature sensor made of polymer-derived ceramics for high-temperature applications

Ran Zhao et al.

SENSORS AND ACTUATORS A-PHYSICAL (2014)

添加到收藏夹

Article Physics, Applied

On electric conduction of amorphous silicon carbonitride derived from a polymeric precursor

Yaohan Chen et al.

APPLIED PHYSICS LETTERS (2013)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and properties of Cf/SiC composites with thin SiCN layer as fiber-protecting coating

Yunzhou Zhu et al.

CERAMICS INTERNATIONAL (2013)

添加到收藏夹

Article Chemistry, Physical

Polymer-derived SiCN and SiOC ceramics - structure and energetics at the nanoscale

Gabriela Mera et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

添加到收藏夹

Article Materials Science, Ceramics

Effect of Cu and Fe addition on electrical properties of Ni-Mn-Co-O NTC thermistor compositions

M. N. Muralidharan et al.

CERAMICS INTERNATIONAL (2012)

添加到收藏夹

Article Materials Science, Ceramics

Thermal decomposition of carbon-rich polymer-derived silicon carbonitrides leading to ceramics with high specific surface area and tunable micro- and mesoporosity

Ravi Mohan Prasad et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis and characterization of a new liquid polymer precursor for Si-B-C-N ceramics

Zongbo Zhang et al.

JOURNAL OF MATERIALS SCIENCE (2011)

添加到收藏夹

Article Materials Science, Ceramics

Ultrahigh-Temperature Semiconductors Made from Polymer-Derived Ceramics

Hee-Yeon Ryu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)

添加到收藏夹

Article Materials Science, Ceramics

Polymer-Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics

Paolo Colombo et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)

添加到收藏夹

Review Materials Science, Ceramics

Negative Temperature Coefficient Resistance (NTCR) Ceramic Thermistors: An Industrial Perspective

Antonio Feteira

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)

添加到收藏夹

Article Materials Science, Ceramics

Electron Transport in Polymer-Derived Amorphous Silicon Oxycarbonitride Ceramics

Yansong Wang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)

添加到收藏夹

Review Physics, Applied

SiC sensors: a review

N. G. Wright et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2007)

添加到收藏夹

Article Engineering, Electrical & Electronic

Characteristics of SiCN microstructures for harsh environment and high-power MEMS applications

Gwiy-Sang Chung

MICROELECTRONICS JOURNAL (2007)

添加到收藏夹

Article Chemistry, Physical

Raman micro spectroscopy of soot and related carbonaceous materials:: Spectral analysis and structural information

A Sadezky et al.

CARBON (2005)

添加到收藏夹

Article Engineering, Electrical & Electronic

Silicon carbide as a new MEMS technology

PM Sarro

SENSORS AND ACTUATORS A-PHYSICAL (2000)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interpretation of Raman spectra of disordered and amorphous carbon

AC Ferrari et al.

PHYSICAL REVIEW B (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.