4.7 Article

Stabilized fuel slurries based on fine coal slime: Rheology, combustion and feasibility study

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Specific Features of the Ignition Behavior of Coal-Water Fuel with the Addition of Glycerol

V. A. Pinchuk et al.

Summary: Using coal-water fuel instead of dry coal reduces harmful emissions, and adding glycerol improves combustion parameters. The existing parameter model does not reflect the real nature of the change, so a more suitable function is proposed for approximating experimental data.

COMBUSTION SCIENCE AND TECHNOLOGY (2023)

Article Energy & Fuels

Eco-friendly utilization of waste oil for preparing coal water slurry: Additive suitability and dispersion mechanism

Jianbin Wang et al.

Summary: The combustion or gasification of industrial waste oil mixed with coal is an environmentally friendly and efficient way of recycling. This study investigated the suitability of additives for waste oil-coal slurry and waste oil-coal-water slurry, and proposed a dispersion and stabilization mechanism for the latter. The results showed that some water-soluble additives formed reverse micelles in the waste oil-coal slurry, leading to agglomeration. The viscosity reduction effect of Tween 80 in the waste oil-coal-water slurry was found to be the best.
Article Energy & Fuels

Preparing coal slurry from organic wastewater to achieve resource utilization: Slurrying performance and dispersant suitability

Jianzhong Liu et al.

Summary: This study investigated the effect of different dispersants on the preparation of coal-wastewater slurry using desulfurization wastewater, pharmaceutical manufacturing wastewater, ammonium-forming wastewater, and deionized water. The results showed that desulfurization wastewater and pharmaceutical manufacturing wastewater improved the preparation of the coal-wastewater slurry, while ammonium-forming wastewater increased the apparent viscosity of the slurry. The prepared coal-wastewater slurries exhibited good pseudoplasticity and shear-thinning fluid characteristics at higher solid concentrations. The addition of wastewater improved the pseudoplasticity of the slurry and ligninesulfonic acid sodium salt was the most effective dispersant in terms of stability.
Article Energy & Fuels

Experimental investigation of circulating fluidized bed combustion of dry powders of coal slime

Bin Liang et al.

Summary: To solve the issue of burning wet coal slime in circulating fluidized bed (CFB) boilers, a proposal is made to dry coal slime in a low-temperature drying system and burn the dried fine powders in a CFB with a highly efficient separator. Experimental results show that the dried slime particles can be burned stably, efficiently, and cleanly with a particle size distribution similar to that of circulating ash particles. This study presents a potential opportunity to advance CFB combustion technology.
Article Environmental Sciences

Influence of waste brake oil on the rheological properties of coal-sludge water slurry

Enle Xu et al.

Summary: In this study, the effect of waste brake oil (WBO) on the dispersion property of coal-sludge oil slurry (CSOS) was investigated. It was found that WBO could significantly reduce the apparent viscosity of CSOS and by adjusting the sewage sludge (SS) content and oil/sludge ratio (O/S), the viscosity of CSOS could be effectively improved. WBO mainly consists of hydrocarbon compounds and oxygenated functional groups, which could form a covering layer on the surfaces of SS and coal particles, reducing their hydrophobicity and the adsorption of dispersant. This research provides a potential method for the disposal of waste sludge and industry oil.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2023)

Article Engineering, Environmental

Investigation on self-sustained combustion, NOx emissions, and ash characteristics of coal slime in a lab-scale fluidized bed

Zheng Gao et al.

Summary: This study investigated the combustion behavior and NOx emissions of coal slime in a fluidized bed boiler. The characteristics of coal slime and its ash were explored using various analytical techniques. The challenges of burnout and fluidization were addressed, and the impact of heavy metal migration and alkaline substances on coal slime combustion was examined.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Article Thermodynamics

Experimental study on atomization characteristics of high-energy-density fuels using a fuel slinger

Daoan Sun et al.

Summary: Experimental investigation was conducted on the spray characteristics of two liquid fuels and one slurry fuel using PDPA technique, showing that droplet number significantly increased with elevated rotational speeds and that viscosity played a crucial role in droplet breakup of liquid fuels. Furthermore, increased rotational speeds promoted average droplet velocities and lowered spray angles. Slurry fuel exhibited a smoother distribution with larger droplet size than liquid fuels.

ENERGY (2021)

Article Chemistry, Applied

Viscosity-temperature characteristics of high-concentration coal-oil slurry preheated by light solvent

Yanjun Zhang et al.

Summary: The concentration of coal-oil slurry significantly affects its viscosity and stability, with proper preheating leading to higher concentration. Increasing preheating temperature and time can decrease the viscosity of the slurry, improving its stability.

FUEL PROCESSING TECHNOLOGY (2021)

Article Thermodynamics

Fragmentation of heated droplets of coal-water slurries containing petrochemicals

D. Antonov et al.

Summary: This research examines the fragmentation of droplets of coal-water slurries containing petrochemicals under different heating conditions. The study identified various pre-ignition behaviors of heated droplets and their impact on the characteristics of secondary fragments. The findings also compared the experimental results with characteristics of similar processes studied in experiments with emulsion droplets and two-component immiscible droplets.

APPLIED THERMAL ENGINEERING (2021)

Article Chemistry, Physical

Performance and mechanism of polyacrylamide stabilizers in coal water slurry

Yan Zhang et al.

Summary: This study experimentally investigated the rheological behaviors and stability performance of coal water slurry prepared with different types of polyacrylamide. The results showed that CWS with added APAM exhibited the best stability performance, possibly due to the increased electrostatic repulsive energy between coal particles by adding APAM.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Thermodynamics

The mixtures of bio-oil derived from different biomass and coal/char as biofuels: Combustion characteristics

Ping Feng et al.

Summary: The study found that bio-oil has a positive impact on the combustion characteristics of coal/char blended biofuels, improving combustion performance. Blending bio-oils reduced activation energy, narrowed the combustion temperature range, and exhibited better combustion characteristics.

ENERGY (2021)

Article Energy & Fuels

Study on the thermogravimetric and combustion of coal slime

Kun Zhou et al.

Summary: The study used a thermogravimetric analyzer to investigate the combustion characteristics of coal slime with different ash contents under varying heating rates. Analysis of TG and DTG curves revealed changes in combustion parameters, showing that higher ash content led to differences in ignition temperature, stability, and burnout characteristics. The sample with 50% ash content showed the best ignition stability characteristics.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2021)

Article Engineering, Chemical

New method for utilizing waste tire pyrolysis residue to prepare slurry fuel: Adsorption and slurry characteristics

Lei Zhou et al.

Summary: In this study, waste tire pyrolysis residue (WTPR) was used to prepare a water slurry, with the addition of dispersants to improve its performance. The adsorption of dispersants changed the surface properties of WTPR, with NP40 showing greater viscosity-reducing and stabilizing abilities. Additionally, all samples exhibited shear-thinning characteristics, with NP40 WTPRWS having the smallest yield stress.

POWDER TECHNOLOGY (2021)

Article Engineering, Environmental

Co-combustion behavior of municipal solid waste and food waste anaerobic digestates: Combustion performance, kinetics, optimization, and gaseous products

Chen Wei et al.

Summary: The study investigates the co-combustion behavior of food waste digestates (FWD) with municipal solid waste (MSW) using thermogravimetric and Fourier transform infrared (TG-FTIR) analysis. Co-combustion with MSW improved the combustion performance of FWD, with the experimental combustion indexes exponentially enhanced as the heating rate increased. The study also found that the optimal operating condition for co-combustion was achieved at 540.4 degrees C, 40 K/min and MSW proportion of 0.95.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Chemical

Improvement on slurry ability and combustion dynamics of low quality coals with ultra-high ash content

Shunxuan Hu et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2020)

Article Engineering, Chemical

Stability and settling performance of coal water slurries under vibration conditions

Zhifang Chai et al.

POWDER TECHNOLOGY (2020)

Article Energy & Fuels

Development and Characterization of a Grape Marc Hydrochar Slurry Fuel

Wanxia Zhao et al.

ENERGY & FUELS (2020)

Article Engineering, Environmental

A novel route to utilize waste engine oil by blending it with water and coal

Kang Zhang et al.

JOURNAL OF HAZARDOUS MATERIALS (2017)

Review Green & Sustainable Science & Technology

A review of multi criteria decision making (MCDM) towards sustainable renewable energy development

Abhishek Kumar et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Medical Laboratory Technology

Uncertainty in Measurement and Total Error: Tools for Coping with Diagnostic Uncertainty

Elvar Theodorsson

CLINICS IN LABORATORY MEDICINE (2017)

Article Energy & Fuels

Burning Properties of Slurry Based on Coal and Oil Processing Waste

Dmitrii O. Glushkov et al.

ENERGY & FUELS (2016)

Article Chemistry, Applied

Analysis of the useable properties of coal-water fuel modified with chemical compounds

Anita Staron et al.

FUEL PROCESSING TECHNOLOGY (2016)

Article Engineering, Environmental

Experimental research of sewage sludge with coal and biomass co-combustion, in pellet form

Agnieszka Kijo-Kleczkowska et al.

WASTE MANAGEMENT (2016)

Article Energy & Fuels

Review on production, characterisation and utilisation of solid fuels in diesel engines

Arun Kumar Wamankar et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Article Energy & Fuels

Emission characteristics of PCDD/Fs, PAHs and PCBs during the combustion of sludge-coal water slurry

Xiaoli Zhao et al.

JOURNAL OF THE ENERGY INSTITUTE (2015)

Article Thermodynamics

Intrinsic reaction kinetics of coal char combustion by direct measurement of ignition temperature

Ryang-Gyoon Kim et al.

APPLIED THERMAL ENGINEERING (2014)

Article Engineering, Chemical

Breakup and atomization of a round coal water slurry jet by an annular air jet

Hui Zhao et al.

CHEMICAL ENGINEERING SCIENCE (2012)

Article Engineering, Chemical

Rheology and thixotropic properties of slurry fuel prepared using municipal wastewater sludge and coal

Jian-zhong Liu et al.

CHEMICAL ENGINEERING SCIENCE (2012)

Article Chemistry, Applied

The slurrying properties of slurry fuels made of petroleum coke and petrochemical sludge

Ruikun Wang et al.

FUEL PROCESSING TECHNOLOGY (2012)

Article Chemistry, Applied

Promoted slurryability of petroleum coke-water slurry by using black liquor as an additive

Xiuli Zhan et al.

FUEL PROCESSING TECHNOLOGY (2010)

Article Engineering, Environmental

Co-firing of oil sludge with coal-water slurry in an industrial internal circulating fluidized bed boiler

Jianguo Liu et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)