☆ 4.6 Article

Direct 3D print polyimide aerogels for synergy management of thermal insulation, gas permeability and light absorption

JOURNAL OF MATERIALS CHEMISTRY A (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Direct ink writing of polyimide/bacterial cellulose composite aerogel for thermal insulation

Zhuocheng Ma et al.

Summary: Polyimide (PI) aerogels, known for their high porosity, low density, thermal insulation and mechanical strength, have potential applications in aerospace vehicle, intelligent driving and batteries. Traditional molding process limits the practical use of PI aerogels, while 3D printing faces challenges like complex support structures and high thermal conductivity. Here, water-based polyamic acid (PAA)/bacterial cellulose (BC) ink is developed for direct ink writing (DIW) of PI/BC aerogels with improved properties compared to molded ones, making them suitable for thermal insulation in complex structures in fields like buildings and petro-chemical engineering.

COMPOSITES COMMUNICATIONS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printed Ti3C2Tx MXene/Cellulose Nanofiber Architectures for Solid-State Supercapacitors: Ink Rheology, 3D Printability, and Electrochemical Performance

Guoqiang Zhou et al.

Summary: This study improved the rheological properties of MXene-based inks by utilizing cellulose nanofibers (CNFs), successfully printing 3D architectures with superior shape fidelity and geometric accuracy, leading to enhanced capacitive performance.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

3D-printed hierarchical porous cellulose/alginate/carbon black hydrogel for high-efficiency solar steam generation

Jun Yuan et al.

Summary: In this study, 3D hierarchical porous hybrid hydrogel evaporators with embedded carbon black are built through 3D printing method for solar steam generation. The evaporators show high evaporation rate, solar energy conversion efficiency, and great application prospects in seawater desalination and wastewater purification.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A Simple Strategy for Constructing Hierarchical Composite Electrodes of PPy-Posttreated 3D-Printed Carbon Aerogel with Ultrahigh Areal Capacitance over 8000 mF cm-2

Jianming Yang et al.

Summary: A well-designed 3D-printed carbon aerogel (CA) electrode, with optimized interface and pore structure, shows significantly improved areal capacitance under a thickness of 2.2 mm, and further enhancement in performance after polypyrrole (PPy) posttreatment. This simple strategy demonstrates potential for boosting energy storage properties of supercapacitor electrodes.

ADVANCED MATERIALS TECHNOLOGIES (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Self-Thickening and Self-Strengthening 3D Printing Magnetic Cellulose-Based Aerogel for Adsorption and Recovery of Methylene Blue

Yang Zhang et al.

Summary: This study demonstrates 3D printing of cellulose-based aerogel containing magnetic Fe3O4 nanoparticles, which serves as an ideal adsorbent for fast, efficient and sustainable removal of organic pollutants from water. The magnetic cellulose-based aerogels provide large active sites for adsorption and can be easily regenerated for reuse through acid-washing.

ADVANCED SUSTAINABLE SYSTEMS (2022)

添加到收藏夹

Article Chemistry, Physical

Recent advances in tailoring and improving the properties of polyimide aerogels and their application

Shahriar Ghaffari-Mosanenzadeh et al.

Summary: Aerogels are known for their ultra-lightweight and high porosity, but due to their hygroscopic nature and brittleness, they are not commonly used in commercial applications. To enhance their mechanical and hydrophobic properties, various reinforcement materials are added to the surface.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Versatile Thermal-Solidifying Direct-Write Assembly towards Heat-Resistant 3D-Printed Ceramic Aerogels for Thermal Insulation

Lukai Wang et al.

Summary: The researchers have successfully fabricated heat-resistant ceramic aerogels using a thermal-solidifying direct-ink-writing technique. These aerogels exhibit excellent high-temperature stability and low thermal conductivity, making them ideal for thermal insulation and other specific applications.

SMALL METHODS (2022)

添加到收藏夹

Article Chemistry, Applied

Ultra-light, elastic, magnetic Polyimide/Fe3O4 composite aerogel with magnetic actuation function

Ting Liu et al.

Summary: Introducing magnetic property, a low-cost and little-toxicity aqueous ammonia is used to prepare a polyimide/Fe3O4 aerogel that exhibits good physical properties and magneto-induced shape memory effect.

JOURNAL OF POROUS MATERIALS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Cost-Effective Additive Manufacturing of Ambient Pressure-Dried Silica Aerogel

Zipeng Guo et al.

Summary: This paper introduces a new method for manufacturing silica aerogel insulation material using direct ink writing technology, followed by room-temperature and ambient pressure drying. Compared with traditional supercritical drying and freeze-drying techniques, this method has significant advantages in manufacturing time and costs, and shows good thermal insulation performance.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Versatile Direct Writing of Aerogel-Based Sol-Gel Inks

Jianming Yang et al.

Summary: Direct ink writing of aerogels shows great potential in designing novel 3D multifunctional materials with hierarchical structures. By controlling parameters during the sol-gel process, various aerogel-based inks were successfully printed, demonstrating potential applications in solar steam generation for high-efficiency 3D-printed evaporators.

LANGMUIR (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fabrication of 3D-Printed Ceramic Structures for Portable Solar Desalination Devices

Win Jonhson et al.

Summary: This paper introduces the fabrication process of the first fully 3D-printed ceramic core structures for portable solar desalination devices to tackle water scarcity. Utilizing robocasting, a flexible 3D printing technique, the device is able to provide uniform water transport delivery and thermal insulation. The portable device has shown excellent ion rejection ability and meets WHO drinking water standards.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Polymer Science

3D Printing of Thermal Insulating Polyimide/Cellulose Nanocrystal Composite Aerogels with Low Dimensional Shrinkage

Chiao Feng et al.

Summary: The study explores a novel method for preparing high-performance PI aerogels using renewable nanomaterials like cellulose nanocrystals (CNCs). By dispersing CNCs in an aqueous solution of polyamic acid ammonium salts (PAAS) for direct ink writing (DIW), porous PI/CNC composite aerogels with enhanced mechanical strength were successfully produced. The presence of PAAS reduced the concentration of CNCs needed for DIW, and the physical network of CNCs improved the shape-fidelity of the aerogels during preparation. Overall, the composite aerogels exhibit low thermal conductivity and show promise as heat management materials.

POLYMERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Exceptional Packing Density of Ammonia in a Dual-Functionalized Metal-Organic Framework

Christopher Marsh et al.

Summary: In this study, a robust Al-based metal-organic framework, MFM-303(Al), was reported to show reversible adsorption of ammonia up to 9.9 mmol g(-1), attributed to the presence of free carboxylic acid and hydroxyl groups. The acidic sites within the framework played a critical role in immobilizing NH3 molecules, resulting in exceptional packing density. Breakthrough experiments demonstrated the excellent performance of MFM-303(Al) in capturing NH3 at low concentrations under both dry and wet conditions.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Three-Dimensional-Printed Silica Aerogels for Thermal Insulation by Directly Writing Temperature-Induced Solidifiable Inks

Lukai Wang et al.

Summary: The thermal-solidifying 3D printing strategy can be used to fabricate silica aerogels with complex architectures, exhibiting comparable performances to traditional aerogels and holding promise for custom design and industrial production of insulation materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printing a Biomimetic Bridge-Arch Solar Evaporator for Eliminating Salt Accumulation with Desalination and Agricultural Applications

Miaomiao Zou et al.

Summary: The biomimetic 3D bridge-arch solar evaporator inspired by nature has shown great efficiency in long-term salt rejection without the need for post-cleaning treatment.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Rational Design of a High Performance and Robust Solar Evaporator via 3D-Printing Technology

Sourav Chaule et al.

Summary: This study addresses the issues of heat loss and salt accumulation in sea water desalination using the broad-band solar spectrum, with two cost-effective approaches. The design of a concave shaped supporter by 3D-printing and the use of a double layered photoabsorber significantly improve the efficiency and stability of the solar evaporator.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

3D-Printed Nanocellulose-Based Cushioning-Antibacterial Dual-Function Food Packaging Aerogel

Wei Zhou et al.

Summary: The newly prepared CNGA/C-AgNPs packaging aerogel exhibits good cushioning and antibacterial properties, with significant inhibitory effects on E. coli and S. aureus. It also possesses high resilience and biodegradability.

MOLECULES (2021)

添加到收藏夹

Article Engineering, Mechanical

3D printing of porous polyimide for high-performance oil impregnated self-lubricating

Chang Yang et al.

Summary: This study successfully demonstrates 3D printing of porous PI for self-lubricating purposes, with printed PI showing good mechanical performance, thermal stability, and suitability for various lubricant oils. This method allows for the manufacturing of high-performance lubricating parts, including those with complex structures.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Super-elasticity at 4K of covalently crosslinked polyimide aerogels with negative Poisson's ratio

Yang Cheng et al.

Summary: The deep cryogenic temperatures pose challenges for elastic materials in aerospace. This study introduces low density covalently crosslinked polyimide (PI) aerogels with super-elastic properties at deep cryogenic temperatures.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Physical

3D printed carbon aerogel microlattices for customizable supercapacitors with high areal capacitance

Shijia Yuan et al.

Summary: This study presents a method to design carbon aerogel microlattices using 3D printing technology, achieving high areal capacitance. Through the use of appropriate materials and processing methods, ideal capacitance performance was achieved under high mass loading and large thickness.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D-Printed Structure Boosts the Kinetics and Intrinsic Capacitance of Pseudocapacitive Graphene Aerogels

Bin Yao et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Intrinsic negative TCR of superblack carbon aerogel films and their ultrabroad band response from UV to microwave

Xiujie Ji et al.

CARBON (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Additive manufacturing of silica aerogels

Shanyu Zhao et al.

NATURE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Flexible Polyimide Aerogels Derived from the Use of a Neopentyl Spacer in the Backbone

Jessica L. Cashman et al.

ACS APPLIED POLYMER MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Multimaterial 3D Printing of Highly Stretchable Silicone Elastomers

Lu-yu Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Additive-free MXene inks and direct printing of micro-supercapacitors

Chuanfang (John) Zhang et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Engineering, Environmental

Self-healing and recyclable biomass aerogel formed by electrostatic interaction

Jiyu Yang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Direct Ink Writing of High Performance Architectured Polyimides with Low Dimensional Shrinkage

Yuxiong Guo et al.

ADVANCED ENGINEERING MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading

Bin Yao et al.

JOULE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ultra-black carbon@silica core-shell aerogels with controllable electrical conductivities

Hongqiang Wang et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Patterned Carbon Nitride-Based Hybrid Aerogel Membranes via 3D Printing for Broadband Solar Wastewater Remediation

Peisheng He et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Materials Science, Composites

Mechanically strong polyimide/carbon nanotube composite aerogels with controllable porous structure

Wei Fan et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanostructured resorcinol-formaldehyde ink for 3D direct writing

Yingting Ge et al.

JOURNAL OF MATERIALS RESEARCH (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Direct ink writing of organic and carbon aerogels

Swetha Chandrasekaran et al.

MATERIALS HORIZONS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ultraviolet-Assisted Direct Ink Write to Additively Manufacture All-Aromatic Polyimides

Daniel A. Rau et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Architectured Leaf-Inspired Ni0.33Co0.66S2/Graphene Aerogels via 3D Printing for High-Performance Energy Storage

Xingwei Tang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ceramic Robocasting: Recent Achievements, Potential, and Future Developments

Erwin Peng et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Materials Science, Ceramics

Facile fabrication of mechanical monolithic polyamide aerogels via a modified sol-gel method

Hongbo Ren et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultralight and Flexible MWNTs/Polyimide Hybrid Aerogels for Elastic Conductors

Yanan Wang et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Robust ambient pressure dried polyimide aerogels and their graphene oxide directed growth of 1D-2D nanohybrid aerogels using water as the only solvent

Guangjie Yang et al.

RSC ADVANCES (2017)

添加到收藏夹

Article Chemistry, Physical

Mechanically robust and shape-memory hybrid aerogels for super-insulating applications

Jinrong Wu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures

Vincent Chi-Fung Li et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Engineering, Environmental

Facile preparation of cross-linked polyimide aerogels with carboxylic functionalization for CO2 capture

Ying Chen et al.

CHEMICAL ENGINEERING JOURNAL (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D-Printed, All-in-One Evaporator for High-Efficiency Solar Steam Generation under 1 Sun Illumination

Yiju Li et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Super Black Material from Low-Density Carbon Aerogels With Subwavelength Structures

Wei Sun et al.

ACS NANO (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solution-processable polyimide aerogels with high hydrophobicity

Shuai Wu et al.

MATERIALS LETTERS (2016)

添加到收藏夹

Article Chemistry, Applied

One-step synthesis of nano-porous monolithic polyimide aerogel

Jinyoung Kim et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores

Cheng Zhu et al.

NANO LETTERS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Poly(maleic anhydride) cross-linked polyimide aerogels: synthesis and properties

Haiquan Guo et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Graphene Aerogel/Epoxy Composites with Exceptional Anisotropic Structure and Properties

Zhenyu Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Highly compressible 3D periodic graphene aerogel microlattices

Cheng Zhu et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis of polyimide cross-linked silica aerogels with good acoustic performance

Peng Yan et al.

RSC ADVANCES (2014)

添加到收藏夹

Article Chemistry, Physical

A novel self-healing poly(amic acid) ammonium salt hydrogel with temperature-responsivity and robust mechanical properties

Li Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

添加到收藏夹

Article Chemistry, Physical

Clay reinforced polyimide/silica hybrid aerogel

Jiao Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.