☆ 4.7 Article

Formation of calcium-phosphate-based coatings on titanium by laser-induced deposition in liquid environment

APPLIED SURFACE SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Ceramics

Development of ceramic coatings on titanium alloy substrate by laser cladding with pre-placed natural derived-slurry: Influence of hydroxyapatite ratio and beam power

Aura-Catalina Mocanu et al.

Summary: The superior mechanical and tribological features of Ti and its alloys make them attractive, but they lack biocompatibility and inertness when implanted in the body for a long time. Surface modification with ceramic coatings is necessary to improve their biomedical features. This study proposed the prospect of coating Ti6Al4V substrates with bovine-bone derived hydroxyapatite (HA) using laser cladding technique. The structural analysis confirmed the formation of calcium titanate as the main phase and the presence of HA only in samples prepared with 100% HA ratio at low to medium laser powers. The optimal technological parameters for ceramic cladded layers with potential compatibility with regenerative medicine applications were determined.

CERAMICS INTERNATIONAL (2023)

添加到收藏夹

Article Chemistry, Physical

Characterization of Hydroxyapatite Film Obtained by Er:YAG Pulsed Laser Deposition on Sandblasted Titanium: An In Vitro Study

Lin Ma et al.

Summary: This study improved the biocompatibility and bone bonding ability of titanium dental implants by using sandblasting as a pretreatment method and applying a hydroxyapatite (HA) coating. The HA coating, with nanorod-like morphology, successfully increased cell attachment but did not enhance cell proliferation.

MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Modulated Laser Cladding of Implant-Type Coatings by Bovine-Bone-Derived Hydroxyapatite Powder Injection on Ti6Al4V Substrates-Part I: Fabrication and Physico-Chemical Characterization

Aura-Catalina Mocanu et al.

Summary: This study explores the feasibility of harmoniously combining calcium-phosphate-based bioceramics and titanium alloys, successfully depositing bovine-bone-derived hydroxyapatite on Ti6Al4V substrates through laser cladding technology. The results demonstrate the formation of fully covered metallic surfaces with ceramic-based materials and a strong metallurgical bond achieved by modulating laser power and BHA-to-Ti ratio.

MATERIALS (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

Effect of Hydroxyapatite Coating by Er: YAG Pulsed Laser Deposition on the Bone Formation Efficacy by Polycaprolactone Porous Scaffold

Ye Zhang et al.

Summary: The study demonstrates the feasibility of preparing a PCL porous scaffold coated with hydroxyapatite using the Er: YAG-PLD method, and the scaffold shows potential for bone tissue engineering.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

添加到收藏夹

Article Chemistry, Applied

Hybrid ZnO/chitosan antimicrobial coatings with enhanced mechanical and bioactive properties for titanium implants

Ming-Hong Lin et al.

Summary: The biocomposite coating consisting of chitosan and ZnO shows enhanced antibacterial properties and bioactivity, effectively inhibiting bacterial adhesion and biofilm formation. The release of Zn2+ ions is attributed to the improved properties, including increased antibacterial activity and corrosion resistance. Additionally, the coating exhibits good cytocompatibility in MG-63 cells compared to pure Ti.

CARBOHYDRATE POLYMERS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Corrosion, wear and biocompatibility of hydroxyapatite bio-functionally graded coating on titanium alloy surface prepared by laser cladding

Zhang Jing et al.

Summary: A hydroxyapatite biofunctional gradient coating (BFGC) was successfully prepared on Ti6Al4V alloy surface via laser cladding, showing promising results in enhancing the wear resistance, corrosion resistance, and biocompatibility of titanium alloy implants. The optimal coating performance was achieved at a laser power of 700 W.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Construction of a TiO2/Cu2O multifunctional coating on Ti-Cu alloy and its influence on the cell compatibility and antibacterial properties

Shuo Liu et al.

Summary: In this study, a TiO2/Cu2O multifunctional coating was prepared on Ti-5Cu alloy by anodic oxidation, enhancing surface bioactivity and antibacterial properties. The anodization treatment improved the biocompatibility of materials and accelerated cell adhesion, suggesting potential for clinical applications of titanium copper alloys.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fast Fabrication of Conductive Copper Structure on Glass Material Using Laser-Induced Chemical Liquid Phase Deposition

Han-Guel Kim et al.

Summary: Glass is a stable material at room temperature and the demand for creating conductive patterns on glass surfaces is increasing rapidly due to the development of the electronic industry. Traditional methods have limitations, so research is needed to improve productivity and conductivity through new processes.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Laser-Assisted Surface Modification of Ni Microstructures with Au and Pt toward Cell Biocompatibility and High Enzyme-Free Glucose Sensing

Evgeniia M. Khairullina et al.

Summary: The influence of Ni microstructure morphology modified with different metals on cell biocompatibility and non-enzymatic glucose detection was investigated. It was found that Ni-Pt electrodes showed better glucose detection performance, while Ni-Au electrodes were more favorable for cell adhesion.

ACS OMEGA (2021)

添加到收藏夹

Article Chemistry, Physical

Synergistic effects of collagen and silver on the deposition characteristics, antibacterial ability, and cytocompatibility of a collagen/silver coating on titanium

Yi-Huang Hsueh et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Chemistry, Physical

Deposition of Durable Micro Copper Patterns into Glass by Combining Laser-Induced Backside Wet Etching and Laser-Induced Chemical Liquid Phase Deposition Methods

Jae Min Seo et al.

MATERIALS (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Development, characterization, and biocompatibility of zinc oxide coupled starch nanocomposites from different botanical sources

Vikash Nain et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

添加到收藏夹

Article Materials Science, Biomaterials

Laser-assisted biomineralization on human dentin for tooth surface functionalization

Ayako Oyane et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of laser fluence and ambient gas pressure on surface morphology and chemical composition of hydroxyapatite thin films deposited using pulsed laser deposition

Hiroaki Nishikawa et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of annealing on the phase transformation of pulsed laser deposited HA/45S5 films

D. G. Wang et al.

MATERIALS LETTERS (2018)

添加到收藏夹

Article Engineering, Biomedical

Rapid and area-specific coating of fluoride-incorporated apatite layers by a laser-assisted biomimetic process for tooth surface functionalization

A. Joseph Nathanael et al.

ACTA BIOMATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of ablation laser pulse repetition rate on the surface protrusion density of hydroxyapatite thin films deposited using pulsed laser deposition

Hiroaki Nishikawa et al.

MATERIALS LETTERS (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

Plasma-Sprayed Hydroxylapatite-Based Coatings: Chemical, Mechanical, Microstructural, and Biomedical Properties

Robert B. Heimann

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

High rate in situ laser-induced synthesis of copper nanostructures performed from solutions containing potassium bromate and ethanol

M. S. Panov et al.

MICROELECTRONIC ENGINEERING (2016)

添加到收藏夹

Article Chemistry, Physical

The contribution of zinc ions to the antimicrobial activity of zinc oxide

Julia Pasquet et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

TiO2-Bioactive Glass Nanostructure Composite Films Produced by a Sol-Gel Method: In Vitro Behavior and UV-Enhanced Bioactivity

Marzie Omid-Bakhtiari et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)

添加到收藏夹

Article Engineering, Biomedical

Surface Microstructure and Bioactivity of Hydroxyapatite and Fluorapatite Coatings Deposited on Ti-6Al-4V Substrates Using Nd-YAG Laser

Chi-Sheng Chien et al.

JOURNAL OF MEDICAL AND BIOLOGICAL ENGINEERING (2014)

添加到收藏夹

Review Engineering, Biomedical

Review of bioactive glass: From Hench to hybrids

Julian R. Jones

ACTA BIOMATERIALIA (2013)

添加到收藏夹

Article Chemistry, Physical

Thermal Conductivity of TiO2 Nanotubes

Tao Gao et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

添加到收藏夹

Article Materials Science, Coatings & Films

Laser cladding of HA/Ti composite coating on NiTi alloy

S. Yang et al.

SURFACE ENGINEERING (2013)

添加到收藏夹

Proceedings Paper Physics, Applied

Laser Induced Chemical Liquid Phase Deposition (LCLD)

Laszlo Nanai et al.

PROCEEDINGS OF THE PHYSICS CONFERENCE TIM - 11 (2012)

添加到收藏夹

Article Engineering, Biomedical

Pulsed laser deposition of hydroxyapatite on titanium substrate with titania interlayer

P. Rajesh et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Properties of pulsed laser deposited fluorinated hydroxyapatite films on titanium

J. V. Rau et al.

MATERIALS RESEARCH BULLETIN (2010)

添加到收藏夹

Article Engineering, Biomedical

Pulsed laser deposition of hydroxyapatite thin films on Ti-6Al-4V: Effect of heat treatment on structure and properties

G. P. Dinda et al.

ACTA BIOMATERIALIA (2009)

添加到收藏夹

Article Materials Science, Ceramics

Development of bioactive materials based on surface chemistry

T. Kokubo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)

添加到收藏夹

Review Materials Science, Multidisciplinary

Biologically and Mechanically Biocompatible Titanium Alloys

Mitsuo Niinomi

MATERIALS TRANSACTIONS (2008)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect of Ti-OH formation on bioactivity of vacuum plasma sprayed titanium coating after chemical treatment

Yikai Chen et al.

SURFACE & COATINGS TECHNOLOGY (2007)

添加到收藏夹

Article Engineering, Biomedical

How useful is SBF in predicting in vivo bone bioactivity?

T Kokubo et al.

BIOMATERIALS (2006)

添加到收藏夹

Article Chemistry, Physical

Influence of the interface layer deposited hydroxyapatite on the adhesion of pulsed laser coatings on titanium alloy

JM Fernández-Pradas et al.

APPLIED SURFACE SCIENCE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.