相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Quantitatively evaluating respective contribution of austenite and deformation-induced martensite to flow stress, plastic strain, and strain hardening rate in tensile deformed TRIP steel
Wenqi Mao et al.
ACTA MATERIALIA (2023)
Stress contribution of B2 phase in Al0.7CoCrFeNi eutectic high entropy alloy
Daeho Yun et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Effect of deformation-induced martensitic transformation on nonuniform deformation of metastable austenitic steel
Wenqi Mao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Effective grain size refinement of an Fe-24Ni-0.3C metastable austenitic steel by a modified two-step cold rolling and annealing process utilizing the deformation-induced martensitic transformation and its reverse transformation
Wenqi Mao et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)
Evolution of dislocation structure determined by neutron diffraction line profile analysis during tensile deformation in quenched and tempered martensitic steels
Hiroyuki Dannoshita et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Thermal Mechanisms of Grain Refinement in Steels: A Review
Zahra Nasiri et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Plasma Hsp90 levels in patients with systemic sclerosis and relation to lung and skin involvement: a cross-sectional and longitudinal study
Hana Storkanova et al.
SCIENTIFIC REPORTS (2021)
Relation between Intergranular Stress of Austenite and Martensitic Transformation in TRIP Steels Revealed by Neutron Diffraction
Stefanus Harjo et al.
ISIJ INTERNATIONAL (2021)
Dynamic strain aging mechanisms in a metastable austenitic stainless steel
Javad Mola et al.
ACTA MATERIALIA (2021)
Grain size altering yielding mechanisms in ultrafine grained high-Mn austenitic steel: Advanced TEM investigations
Chang-Yu Hung et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
In situ diffraction characterization on microstructure evolution in austenitic stainless steel during cyclic plastic deformation and its relation to the mechanical response
Masayoshi Kumagai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Work hardening behavior of dual phase copper-iron alloy at low temperature
Takayuki Yamashita et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Role of Deformation-Induced Martensite in TRIP Effect of Metastable Austenitic Steels
Noriyuki Tsuchida et al.
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN (2021)
Processing and Properties of Reversion-Treated Austenitic Stainless Steels
Antti Jarvenpaa et al.
METALS (2020)
Strategy for managing both high strength and large ductility in structural materials-sequential nucleation of different deformation modes based on a concept of plaston
Nobuhiro Tsuji et al.
SCRIPTA MATERIALIA (2020)
In situ neutron diffraction study of phase stress evolution in a ferrous medium-entropy alloy under low-temperature tensile loading
Jae Wung Bae et al.
SCRIPTA MATERIALIA (2019)
The role of the austenite grain size in the martensitic transformation in low carbon steels
Carola Celada-Casero et al.
MATERIALS & DESIGN (2019)
Deformation-induced martensitic transformation kinetics and correlative micromechanical behavior of medium-Mn transformation-induced plasticity steel
Minghe Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Mechanism of huge Luders-type deformation in ultrafine grained austenitic stainless steel
Si Gao et al.
SCRIPTA MATERIALIA (2019)
Effect of Grain Size and Dislocation Density on Strain-Induced Martensitic Transformation in Austenitic Stainless Steels
Shun Furukane et al.
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN (2019)
Anisotropic distribution of the micro residual stresses in lath martensite revealed by FIB ring-core milling technique
Fady Archie et al.
ACTA MATERIALIA (2018)
Deformation behavior of as-cast and as-extruded Mg97Zn1Y2 alloys during compression, as tracked by in situ neutron diffraction
Wu Gong et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Cooperative strain accommodation over grains in martensitic transformation from Fe-Ni nanocrystalline austenite
Akinobu Shibata et al.
PHILOSOPHICAL MAGAZINE LETTERS (2017)
Martensite phase stress and the strengthening mechanism in TRIP steel by neutron diffraction
Stefanus Harjo et al.
SCIENTIFIC REPORTS (2017)
Temperature-dependent micromechanical behavior of medium-Mn transformation-induced-plasticity steel studied by in situ synchrotron X-ray diffraction
Minghe Zhang et al.
ACTA MATERIALIA (2017)
Some Strengthening Methods for Austenitic Stainless Steels
L.P. Karjalainen et al.
STEEL RESEARCH INTERNATIONAL (2016)
The role of martensitic transformation on bimodal grain structure in ultrafine grained AISI 304L stainless steel
S. Sabooni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Yielding Behavior and Its Effect on Uniform Elongation of Fine Grained IF Steel
Si Gao et al.
MATERIALS TRANSACTIONS (2014)
Effect of Grain Size on Thermal and Mechanical Stability of Austenite in Metastable Austenitic Stainless Steel
Yoshikazu Matsuoka et al.
ISIJ INTERNATIONAL (2013)
The influence of grain size on the strain-induced martensite formation in tensile straining of an austenitic 15Cr-9Mn-Ni-Cu stainless steel
A. Kisko et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
The Effect of Chemical Composition and Heat Treatment Conditions on Stacking Fault Energy for Fe-Cr-Ni Austenitic Stainless Steel
Toshio Yonezawa et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Quantitative analysis of variant selection in ausformed lath martensite
G. Miyamoto et al.
ACTA MATERIALIA (2012)
Microstructure and Crystallographic Features of Martensite Transformed from Ultrafine-Grained Austenite in Fe-24Ni-0.3C Alloy
Akinobu Shibata et al.
MATERIALS TRANSACTIONS (2012)
Influence of austenitic orientation on martensitic transformations in a compressed high manganese steel
T. -Y. Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Analysis of deformation induced martensitic transformation in stainless steels
A. Das et al.
MATERIALS SCIENCE AND TECHNOLOGY (2011)
Effect of grain size on strain-induced martensitic transformation start temperature in an ultrafine grained metastable austenitic steel
Yeon-Seung Jung et al.
METALS AND MATERIALS INTERNATIONAL (2011)
Current Status of Engineering Materials Diffractometer at J-PARC
Harjo Stefanus et al.
RESIDUAL STRESSES VIII (2011)
Transformation potential predictions for the stress-induced austenite to martensite transformation in steel
A. Creuziger et al.
ACTA MATERIALIA (2010)
Characterization of local deformation behavior of Fe-Ni lenticular martensite by nanoindentation
Ling Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Production of nano/submicron grained AISI 304L stainless steel through the martensite reversion process
Farnoosh Forouzan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Recent developments in stainless steels
K. H. Lo et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2009)
Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review
Bing Pan et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2009)
Enhanced Mechanical Properties through Reversion in Metastable Austenitic Stainless Steels
M. C. Somani et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Mechanically induced martensitic transformation as a stress-driven process
H. J. M. Geijselaers et al.
SCRIPTA MATERIALIA (2009)
Effect of grain size on transformation-induced plasticity in an ultrafine-grained metastable austenitic steel
Chan-Soo Yoo et al.
SCRIPTA MATERIALIA (2008)
Crystallographic texture of stress-affected bainite
Saurabh Kundu et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2007)
Transformation induced plasticity assisted steels: stress or strain affected martensitic transformation?
S. Chatterjee et al.
MATERIALS SCIENCE AND TECHNOLOGY (2007)
Stepwise transformation behavior of the strain-induced martensitic transformation in a metastable stainless steel
Peter Hedstrom et al.
SCRIPTA MATERIALIA (2007)
Effect of internal stress on autocatalytic nucleation of martensitic transformation
QP Meng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Hall-Petch relation and boundary strengthening
N Hansen
SCRIPTA MATERIALIA (2004)
Correlation between strength and microstructure of ball-milled Al-Mg alloys determined by X-ray diffraction
G Ribárik et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Effect of grain refinement on thermal stability of metastable austenitic steel
S Takaki et al.
MATERIALS TRANSACTIONS (2004)
Bainite formation influenced by large stress
K Hase et al.
MATERIALS SCIENCE AND TECHNOLOGY (2004)
Texture analysis of ancient coins with TOF neutron diffraction
YX Xie et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Orientation rotation behavior during in situ tensile deformation of polycrystalline 1050 aluminum alloy
JH Han et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2003)
Strength and tension/compression asymmetry in nanostructured and ultrafine-grain metals
S Cheng et al.
ACTA MATERIALIA (2003)
In situ neutron diffraction during tensile deformation of a ferrite-cementite steel
Y Tomota et al.
ACTA MATERIALIA (2003)
Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing
N Tsuji et al.
SCRIPTA MATERIALIA (2002)
High tensile ductility in a nanostructured metal
YM Wang et al.
NATURE (2002)
Stabilization mechanisms of retained austenite in transformation-induced plasticity steel
JJ Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Crystallite size distribution and dislocation structure determined by diffraction profile analysis:: principles and practical application to cubic and hexagonal crystals
T Ungár et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2001)
A micromechanic modeling for transformation induced plasticity in steels
N Tsuchida et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
分享论文
