☆ 4.7 Article

Hyperreduced-order modeling of thermally coupled flows

APPLIED MATHEMATICAL MODELLING (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mathematics

Analysis of a Stabilised Finite Element Method for Power-Law Fluids

Gabriel R. Barrenechea et al.

Summary: This paper presents a low-order finite element method for the incompressible non-Newtonian flow problem with power-law rheology. The method uses a linear approximation of the velocity field and a constant approximation of the pressure. To compensate for the failure of the inf-sup condition, pressure jumps are added to the formulation, and a divergence-free approximation of the velocity field is included in the discretization. The convergence of the method is proven for a range of power-law index values.

CONSTRUCTIVE APPROXIMATION (2023)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Reduced order modeling for parametrized generalized Newtonian fluid flows

R. Reyes et al.

Summary: This paper presents a parametrized projection-based model reduction approach for time-dependent generalized Newtonian fluids in a computational framework. The authors use an offline-online setting with proper orthogonal and Tucker decompositions, along with finite element method and finite differences for discretization, and variational multiscale approach for stabilization. The reduced method is evaluated through numerical tests.

JOURNAL OF COMPUTATIONAL PHYSICS (2023)

添加到收藏夹

Article Thermodynamics

A combined Combustion-Conjugate heat transfer analysis for Design of partially insulated pistons

Arif Taibani et al.

Summary: This study investigates the improvement of engine thermal efficiency by partial insulation coverage. Through simulations and experimental validation, it is found that partial insulation coverage can enhance engine thermal efficiency compared to full insulation coverage.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Aerodynamic shape optimization of an electric aircraft motor surface heat exchanger with conjugate heat transfer constraint

Joshua L. Anibal et al.

Summary: Electrified aircraft require efficient thermal management systems to remove waste heat from electric motors. In this study, a shape optimization method was applied to design a heat sink for an electric technology demonstrator. Analytic tools lack the precision required for detailed shaping and assessment, so first-principles-based models and gradient-based optimization were used to find designs that minimize drag while satisfying the heat load constraint. The study provided insights into the effect of heat load on heat exchanger geometry and the impact of optimized designs on drag reduction, offering potential benefits for other low-heat-rejection heat exchangers.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Engineering, Chemical

Numerical study on the use of shear-thinning nanofluids in a micro pin-fin heat sink including vortex generators and changes in pin shapes

I. Aguirre et al.

Summary: This study numerically investigated the effects of vortex generators and changes in pin shape on flow characteristics in microchannel heat sinks. The results showed that the use of vortex generators significantly increased heat transfer rates, but also increased pressure drops in Newtonian fluids, while reducing pumping costs in shear-thinning fluids.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2022)

添加到收藏夹

Article Mathematics, Applied

An adaptive iterative linearised finite element method for implicitly constituted incompressible fluid flow problems and its application to Bingham fluids

Pascal Heid et al.

Summary: In this work, the theory of adaptive finite element analysis for implicitly constituted incompressible fluid flow problems is extended by considering the approximation of nonlinear finite element solutions using an iterative solver. The modified algorithm generates a computable sequence with a weak limit point that serves as a solution to the given problem. The abstract theory is applicable to Bingham fluids with and without the convective term, and the performance of the adaptive iterative linearized finite element algorithm is demonstrated through numerical experiments.

APPLIED NUMERICAL MATHEMATICS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Error analysis of a residual-based stabilization-motivated POD-ROM for incompressible flows

Tomas Chacon Rebollo et al.

Summary: This article presents error bounds for a velocity-pressure segregated POD reduced order model discretization of the Navier-Stokes equations. The proposed estimates are proven to be stable and accurately predict the convergence rate of the real errors. The method is assessed using two flow problems and shows good predictive performance.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Numerical study of the use of residual- and non-residual-based stabilized VMS formulations for incompressible power-law fluids

A. Gonzalez et al.

Summary: In this study, two stabilized variational-multiscale-type finite element methods were assessed for the numerical approximation of incompressible fluids. The performance of these methods was compared under different conditions, and some influencing factors were investigated. The experimental results indicate that these two methods have different ranges of applicability and effectiveness.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Parameterized nonintrusive reduced-order model for general unsteady flow problems using artificial neural networks

Oliviu Sugar-Gabor

Summary: A nonintrusive reduced-order model for nonlinear parametric flow problems has been developed, utilizing neural networks to approximate reduced-order coefficients and achieve efficient reduction. Numerical studies confirm the accuracy and speed-up achieved by this nonintrusive approach compared to traditional intrusive methods.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2021)

添加到收藏夹

Article Thermodynamics

Conjugate heat transfer study of the impact of 'thermo-swing' coatings on internal combustion engines heat losses

Alberto Broatch et al.

Summary: This study uses a combination of CFD and CHT simulations to predict heat losses through the combustion chamber walls of a spark ignition engine and analyzes the impact of coating on engine efficiency. The results show that CFD-CHT calculations yield very good results in heat transfer prediction during the engine cycle.

INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Numerical modeling of laminar and chaotic natural convection flows using a non-residual dynamic VMS formulation

G. Osses et al.

Summary: The performance of a stabilized VMS-type finite element formulation for a non-residual structure in highly convective natural flows is numerically verified in this article. The introduction of two components for the sub-scale velocities allows the resolution of chaotic and highly convective problems without the need for an additional turbulence model. The results confirm the accuracy and robustness of the dynamic formulation in solving highly nonlinear problems with strong thermal coupling.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

添加到收藏夹

Article Mechanics

Numerical study of the effect of blockage ratio in forced convection confined flows of shear-thinning fluids

O. Ruz et al.

Summary: This study numerically investigates the fluid dynamics and heat transfer of time-dependent flows with shear-thinning behavior over two confined square cylinders in tandem arrangement, showing a transition from laminar to chaotic flow with decreasing power-law index and increasing blockage ratio. Thermal analysis demonstrates an increase in average Nusselt numbers in chaotic flows, and results from the three-dimensional cases confirm those proposed for the two-dimensional case.

JOURNAL OF FLUID MECHANICS (2021)

添加到收藏夹

Article Thermodynamics

Numerical investigation of conjugate heat transfer in a pillow-plate heat exchanger

A. Zibart et al.

Summary: This study conducted conjugate heat transfer modeling and CFD-based simulations for a Pillow Plate Heat Exchanger operated in countercurrent mode, allowing for a detailed analysis of thermal resistances and the development of methods for their correct calculation.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Simulating natural convection with high Rayleigh numbers using the Smoothed Particle Hydrodynamics method

Pengying Yang et al.

Summary: This study conducts simulations of natural convection at high Rayleigh numbers using the SPH method, presenting four integrated SPH models for assessment. The results show that SPH model_4 is the most suitable for simulating closed natural convection at high Rayleigh numbers, with good agreement with reference solutions.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Improved water freezing with baffles attached to a freezing tunnel: Mathematical modeling and numerical simulation by a conjugate finite volume model

Edgardo J. Tabilo et al.

Summary: The study numerically investigated the impact of baffles on the natural heat convection with phase change of pure water inside a square container, finding that the baffles reduced the hydrodynamic and thermal boundary layers, resulting in decreased freezing time and more uniform temperature distribution. The effect of baffle length on heat flux and vortex shedding frequency behind the water container was also assessed.

INTERNATIONAL JOURNAL OF REFRIGERATION (2021)

添加到收藏夹

Article Thermodynamics

Modeling unsteady heat and mass transfer with prediction of mechanical stresses in wood drying

Cristian A. Chavez et al.

Summary: This work presents a predictive transient two-dimensional model describing the evolution of heat, mass and mechanical stresses during wood dehydration inside an experimental drying chamber. The non-linear coupled differential equations of heat, mass and stresses were integrated by the Control Volume Finite Element method using triangular elements with linear interpolation functions for the dependent variables. The mathematical model allows an accurate prediction of industrial information such as drying curves, temperature distribution, moisture content distribution and mass/thermal stresses.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

An analytical correlation for conjugate heat transfer in fin and tube heat exchangers

Hosein Kalantari et al.

Summary: This study quantified the conjugate heat transfer performance of liquid-gas fin and tube heat exchangers through mathematical modeling, validated against experimental data. Results suggest that within a certain Reynolds number range, larger fin length factor, fin pitch, and smaller tube diameter are more favorable for heat transfer efficiency.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A finite element reduced-order model based on adaptive mesh refinement and artificial neural networks

Joan Baiges et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2020)

添加到收藏夹

Article Nuclear Science & Technology

Hybrid medium model for conjugate heat transfer modeling in the core of sodium-cooled fast reactor

X. A. Wang et al.

NUCLEAR ENGINEERING AND TECHNOLOGY (2020)

添加到收藏夹

Article Mathematics, Applied

AN ARTIFICIAL COMPRESSION REDUCED ORDER MODEL

Victor Decaria et al.

SIAM JOURNAL ON NUMERICAL ANALYSIS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Projection-based reduced order models for flow problems: A variational multiscale approach

Ricardo Reyes et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Nonlinear model reduction: A comparison between POD-Galerkin and POD-DEIM methods

Denis Sipp et al.

COMPUTERS & FLUIDS (2020)

添加到收藏夹

Article Mathematics, Applied

Certified Reduced Basis VMS-Smagorinsky model for natural convection flow in a cavity with variable height

Francesco Ballarin et al.

COMPUTERS & MATHEMATICS WITH APPLICATIONS (2020)

添加到收藏夹

Article Mathematics, Applied

Numerical verification of a non-residual orthogonal term-by-term stabilized finite element formulation for incompressible convective flow problems

A. Gonzalez et al.

COMPUTERS & MATHEMATICS WITH APPLICATIONS (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Data -driven POD-Galerkin reduced order model for turbulent flows

Saddam Hijazi et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2020)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

Applied and Theoretical Aspects of Conjugate Heat Transfer Analysis: A Review

Bibin John et al.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Development of POD reduced-order model and its closure scheme for 2D Rayleigh-Benard convection

Weihua Cai et al.

APPLIED MATHEMATICAL MODELLING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic term-by-term stabilized finite element formulation using orthogonal subgrid-scales for the incompressible Navier-Stokes problem

E. Castillo et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Pseudoplastic fluid flows for different Prandtl numbers: Steady and time-dependent solutions

A. Aguirre et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Continuous data assimilation reduced order models of fluid flow

Camille Zerfas et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Machine learning closures for model order reduction of thermal fluids

Omer San et al.

APPLIED MATHEMATICAL MODELLING (2018)

添加到收藏夹

Article Thermodynamics

Direct Numerical Simulation of an air-filled differentially heated square cavity with Rayleigh numbers up to 1011

Frederic Sebilleau et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Turbulent natural convection heat transfer in rectangular enclosures using experimental and numerical approaches: A review

I. V. Miroshnichenko et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Article Thermodynamics

Modeling 3D conjugate heat and mass transfer for turbulent air drying of Chilean papaya in a direct contact dryer

Roberto A. Lemus-Mondaca et al.

HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Accelerated mesh sampling for the hyper reduction of nonlinear computational models

Todd Chapman et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Learning-based robust stabilization for reduced-order models of 2D and 3D Boussinesq equations

Mouhacine Benosman et al.

APPLIED MATHEMATICAL MODELLING (2017)

添加到收藏夹

Article Thermodynamics

High-resolution high-order upwind compact scheme-based numerical computation of natural convection flows in a square cavity

Bingxin Zhao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Engineering, Chemical

Conjugate heat transfer and entropy generation in a cavity filled with a nanofluid-saturated porous media and heated by a triangular solid

Muneer A. Ismael et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2016)

添加到收藏夹

Article Mathematics, Applied

On Preconditioning of Incompressible Non-Newtonian Flow Problems

Xin He et al.

JOURNAL OF COMPUTATIONAL MATHEMATICS (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Dimensional reduction of nonlinear finite element dynamic models with finite rotations and energy-based mesh sampling and weighting for computational efficiency

Charbel Farhat et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2014)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Non-linear model reduction for the Navier-Stokes equations using residual DEIM method

D. Xiao et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2014)

添加到收藏夹

Article Mathematics, Applied

Variational Multiscale Proper Orthogonal Decomposition: Navier-Stokes Equations

Traian Iliescu et al.

NUMERICAL METHODS FOR PARTIAL DIFFERENTIAL EQUATIONS (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Proper orthogonal decomposition closure models for turbulent flows: A numerical comparison

Zhu Wang et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2012)

添加到收藏夹

Article Mechanics

Stability of two-dimensional (2D) natural convection flows in air-filled differentially heated cavities: 2D/3D disturbances

Shihe Xin et al.

FLUID DYNAMICS RESEARCH (2012)

添加到收藏夹

Article Physics, Fluids & Plasmas

Compact computations based on a stream-function-velocity formulation of two-dimensional steady laminar natural convection in a square cavity

Pei Xiang Yu et al.

PHYSICAL REVIEW E (2012)

添加到收藏夹

Article Thermodynamics

Direct numerical simulation of a differentially heated cavity of aspect ratio 4 with Rayleigh numbers up to 1011 - Part I: Numerical methods and time-averaged flow

F. X. Trias et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

添加到收藏夹

Article Thermodynamics

Direct numerical simulation of a differentially heated cavity of aspect ratio 4 with Rayleigh numbers up to 1011 - Part II: Heat transfer and flow dynamics

F. X. Trias et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

添加到收藏夹

Article Mechanics

Aspect ratio dependence of heat transfer and large-scale flow in turbulent convection

J. Bailon-Cuba et al.

JOURNAL OF FLUID MECHANICS (2010)

添加到收藏夹

Article Engineering, Multidisciplinary

Parallel CFD Analysis of Conjugate Heat Transfer in a Dry-Type Transformer

Carlos Ortiz et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2009)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Enablers for robust POD models

M. Bergmann et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2009)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Reduced basis method for multi-parameter-dependent steady Navier-Stokes equations: Applications to natural convection in a cavity

Simone Deparis et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2009)

添加到收藏夹

Article Computer Science, Software Engineering

Optimizing Cubature for Efficient Integration of Subspace Deformations

Steven S. An et al.

ACM TRANSACTIONS ON GRAPHICS (2008)

添加到收藏夹

Article Engineering, Chemical

Determination of an effective heat transfer coefficients for can headspace during thermal sterilization process

Ibrahim O. Mohamed

JOURNAL OF FOOD ENGINEERING (2007)

添加到收藏夹

Article Thermodynamics

Simulation of high Rayleigh number natural convection in a square cavity using the lattice Boltzmann method

HN Dixit et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A priori hyperreduction method: an adaptive approach

D Ryckelynck

JOURNAL OF COMPUTATIONAL PHYSICS (2005)

添加到收藏夹

Article Mathematics

An 'empirical interpolation' method: application to efficient reduced-basis discretization of partial differential equations

M Barrault et al.

COMPTES RENDUS MATHEMATIQUE (2004)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A fourth-order compact finite difference scheme for the steady stream function-vorticity formulation of the Navier-Stokes/Boussinesq equations

ZF Tian et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2003)

添加到收藏夹

Article Thermodynamics

h-adaptive finite element solution of high Rayleigh number thermally driven cavity problem

D Mayne et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.