4.7 Article

Comparison of the poisoning mechanism of different zinc species on Nb-Doped Ce-Ti SCR catalysts

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Chemical

Enhancing SO2-shielding effect and Lewis acid sites for high efficiency in low-temperature SCR of NO with NH3: Reinforced electron-deficient extent of Fe3+enabled by Ti4+in Fe2O3

Yixuan Fan et al.

Summary: Ti-doped Fe2O3 nanoparticles show high activity and resistance to SO2, allowing for efficient reduction of NO at low temperatures. The addition of Ti4+ strengthens the electron-deficient tendency of Fe3+, enabling the catalyst to selectively adsorb NH3 and resist SO2. In addition, the embedded Ti4+ also increases the number of Lewis acid sites, enhancing the reaction rate of SCR.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Article Engineering, Chemical

Role of Ce in promoting low-temperature performance and hydrothermal stability of Ce/Cu-SSZ-13 in the selective catalytic reduction of NOx with NH3

Baorui Wang et al.

Summary: With the increase of car ownership, new challenges are brought to the treatment of mobile source exhaust gas, especially denitration (de-NOx). It is urgent to develop highly efficient de-NOx catalyst with a wide working temperature window. In this study, Ce modified Cu-SSZ-13 molecular sieves (Ce/Cu-SSZ-13) were prepared and investigated for their low-temperature de-NOx performance and hydrothermal stability in the selective catalytic reduction (SCR) of NOx.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Article Chemistry, Physical

Insight into the Origin of Excellent SO2 Tolerance and de-NOx Performance of quasi-Mn-BTC in the Low-Temperature Catalytic Reduction of Nitrogen Oxide

Kunli Song et al.

Summary: This study reports a selective catalytic reduction (SCR) catalyst, quasi-metal-organic-framework (MOF) nanorod containing manganese (quasi-Mn-BTC),which overcomes the disadvantage of poor SO2 tolerance of Mn-based catalysts. The catalyst exhibits excellent low-temperature (LT) denitration (de-NOx) performance and maintains high NOx conversion even under high SO2 concentration.

ACS CATALYSIS (2023)

Article Nanoscience & Nanotechnology

Rational Regulation of Reducibility and Acid Site on Mn-Fe-BTC to Achieve High Low-Temperature Catalytic Denitration Performance

Kunli Song et al.

Summary: Selective catalytic reduction with ammonia is the mainstream technology for flue gas denitration. The reducibility and acid site are two important factors affecting de-NOx performance, and their regulation through synthesis of Mn-Fe-BTC catalyst with different ratios of Mn and Fe has been investigated. The research provides guidance for flexible regulation of reducibility and acid site of low-temperature de-NOx catalyst.

ACS APPLIED MATERIALS & INTERFACES (2023)

Article Green & Sustainable Science & Technology

Migration and transformation of sulfur and zinc during high-temperature flue gas pyrolysis of waste tires

Xin Zhang et al.

Summary: In this study, the weight loss properties of waste tires (WT) were investigated using TG-MS test. WT pyrolysis under simulated coal-fired flue gas was conducted, and the transformation characteristics of sulfur (S) and zinc (Zn) during WT pyrolysis were analyzed. The results showed that the weight loss of WT occurred in three stages, and the principal sulfur-containing gas emitted was H2S. The temperature had a significant impact on the enrichment of S and Zn in the solid product, and the addition of MgO promoted the enrichment of Zn, while Fe2O3 resulted in the highest sulfur fixation. The research results can provide theoretical references for pollutant control technologies.

JOURNAL OF CLEANER PRODUCTION (2023)

Article Engineering, Chemical

Elaborating the improving SO2 resistance mechanism of CeWTi catalysts through framework confined ordered mesoporous structures for low-temperature NH3-SCR reaction

Mengqian Li et al.

Summary: In this study, an ordered mesoporous Ce-W-Ti-E catalyst with a framework confined structure was constructed for enhancing the SO2 tolerance in the NH3-SCR reaction at low temperature. The framework confined ordered mesoporous structure provided a larger specific surface area and abundant active sites for the catalyst. The introduction of W element increased surface acid sites and inhibited the adsorption of SO2 on the catalyst surface, thus protecting the active sites from SO2 attack. Overall, the Ce-W-Ti-E catalyst showed a wide operating temperature range, better stability, and strong sulfur resistance, leading to an extended catalyst lifetime in the NH3-SCR process.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Article Engineering, Environmental

Promoting the catalytic activity and SO2 resistance of CeO2 by Ti-doping for low-temperature NH3-SCR: Increasing surface activity and constructing Ce3+sites

Jie Zhang et al.

Summary: CeO2-based oxides doped with Ti exhibit enhanced catalytic performance and SO2 resistance for low-temperature selective catalytic reduction of NOx.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Engineering, Environmental

Insights into the poisoning mechanisms of zinc compounds on V2O5-WO3/ TiO2 catalyst for NH3-SCR: Effect of the anion species

Jun Cao et al.

Summary: In this study, the effect of different zinc compounds (ZnSO4, ZnO and ZnCl2) on a V2O5-WO3/TiO2 catalyst was investigated to understand the deactivation mechanism. The results showed that ZnCl2 had the highest negative impact on the catalyst, followed by ZnO and ZnSO4, indicating the significant influence of anions. Zinc ions interacted with active V-OH and O--V structure, reducing the concentration of active Bronsted acid sites and influencing the V5+& REVARR;V4+ redox cycle, as well as inhibiting the activation of NH3. Chloride ions interacted with V-OH, possibly forming V-Cl and suppressing the formation and mobility of surface adsorbed oxygen, exacerbating the negative effect. On the other hand, sulfate ions weakened the poisoning effect of zinc ions through strong anion/cation interaction and likely formed V-O-SO3OH, which is proposed to be an active Bronsted acid site capable of activating NH3 in the NH3-SCR reaction. The introduction of zinc ions increased the adsorption of NOx species to form stable and inactive nitro species, which was inhibited by the presence of sulfate ions.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2023)

Article Engineering, Environmental

Improvement in the resistance to KCl and PbCl2 synergistic poisoning of the commercial SCR catalyst by Ce(SO4)2 modification: A combined experimental and spin-polarized DFT study

Yang -wen Wu et al.

Summary: In this study, a Ce(SO4)2-V2O5-MoO3/TiO2 catalyst with 15 wt% Ce(SO4)2 loading was developed, which maintained high activity under the synergistic poisoning of 2 wt% KCl and PbCl2. The resistance mechanisms were explored and it was found that the interactions between Ce(SO4)2 and K/Pb species, the redox ability improvement, and the maintenance of high surface acidity contributed to the enhanced resistance.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2023)

Article Engineering, Environmental

Three-dimensionally ordered macroporous Ce-W-Nb oxide catalysts for selective catalytic reduction of NOx with NH3

Ye Jiang et al.

Summary: 3DOM Ce-W-Nb ternary catalysts show excellent NH3-SCR activity, high thermal stability, and durability. The addition of Nb leads to more evenly dispersed active sites and increased specific surface area. The interaction among Ce, W, and Nb species enhances the chemisorbed oxygen, promoting SCR activity, while Nb doping boosts NH3 adsorption and facilitates the generation of active NOx species, accelerating the reaction rate.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Influence of phosphorus on the NH3-SCR performance of CeO2-TiO2 catalyst for NOx removal from co-incineration flue gas of domestic waste and municipal sludge

Jun Cao et al.

Summary: This study investigates the effect of phosphorus on the NH3-SCR performance and physicochemical properties of CeO2-TiO2 catalyst. The results show that phosphorus decreases the NH3-SCR activity and suppresses the formation of NOx and N2O caused by NH3 over-oxidation. The introduction of phosphorus disrupts the catalyst's structure, limiting the transfer of electrons, the relative contents of Ce3+, and the surface adsorbed oxygen, leading to the inhibition of NH3 over-oxidation.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Engineering, Environmental

Improving the K resistance effectively of CeO2-TiO2 catalyst by Nb doping for NH3-SCR reaction

Ye Jiang et al.

Summary: The role of Nb doping in improving the anti-K poisoning ability of CeO2-TiO2 catalyst was investigated in this study. It was found that the Nb-modified catalyst exhibited significantly enhanced catalytic activity in the presence of K. The doping of Nb improved the BET surface area and reduced the surface crystallinity of the catalyst. In addition, the Nb-modified catalyst showed a smaller decrease in the ratio of Ce3+/Ce4+, surface chemisorbed oxygen, Bronsted acidity, and redox property in the presence of K. The results of in situ DRIFTs indicated that the reactions on both fresh and K-poisoned catalysts were controlled by combined E-R and L-H mechanisms. The addition of Nb enhanced the adsorption of NO and NH3, contributing to the improved K-poisoning resistance of CeO2-TiO2.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Article Chemistry, Multidisciplinary

Isolating Contiguous Ir Atoms and Forming Ir-W Intermetallics with Negatively Charged Ir for Efficient NO Reduction by CO

Yongjun Ji et al.

Summary: This study reports a highly efficient Ir-based catalyst with only 1% Ir loading for CO-SCR. The catalyst enables complete NO conversion to N2 at 250 degrees C in the presence of 1% O2 and has a wide temperature window (250-400 degrees C). Experimental results and theoretical calculations show that the negatively charged single Ir atoms enhance NO dissociation, while the Ir-W intermetallic nanoparticles accelerate the reduction of N2O and NO2 intermediates by CO.

ADVANCED MATERIALS (2022)

Article Engineering, Chemical

Unveiling the effect of Al2O3 on PbCl2 resistance over Mn-Ce/AC catalyst for low-temperature NH3-SCR of NO

Zhichao Chen et al.

Summary: In this study, an Al2O3-modified Mn-Ce/AC catalyst was synthesized using the impregnation method. The addition of Al significantly improved the catalytic activity of the MC/AC catalyst. XRD analysis confirmed that Al oxide inhibited the crystallization of active MnO2 on the poisoned catalysts, leading to better component dispersion. Al doping increased the aggregation of PbCl2, releasing more active sites and mitigating the negative effect of PbCl2. The presence of more Mn4+ and surface oxygen with Al addition promoted the redox cycle and activation of reactants. The enhanced surface acidity and redox property played important roles in the catalyst's ability to resist PbCl2. In situ DRIFTS analysis revealed that both E-R and L-H pathways were followed by all catalysts, with E-R being the dominant pathway. PbCl2 did not change the reaction pathways but hindered the occurrence of the reaction. A possible mechanism model of Al2O3's resistance to PbCl2 over the MC/AC catalyst was proposed.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2022)

Article Chemistry, Physical

Synergistic poisoning of KCl and PbCl2 on commercial V2O5-MoO3/TiO2 catalysts for MSW incineration flue gas denitrification

Ming-xin Xu et al.

Summary: This study found that single poisoning of PbCl2 is weak for SCR catalyst deactivation, while co-poisoning of KCl and PbCl2 suppresses NH3 activation and enhances SCR catalyst deactivation.

CATALYSIS COMMUNICATIONS (2022)

Article Energy & Fuels

Effect of multi-layered nanosheets γ-Al2O3 with (110) facets on zinc deactivation resistance for Ce-Ti SCR catalyst

Pijun Gong et al.

Summary: This study introduces multi-layered nanosheets γ-Al2O3 structure to improve the Zn-poisoning resistance performance of SCR catalysts. The catalyst with multi-layered nanosheets shows excellent catalytic activity with over 90% NO conversion. Zn species prefer to adsorb on multi-layered nanosheets γ-Al2O3, effectively protecting CeO2.

JOURNAL OF THE ENERGY INSTITUTE (2022)

Article Engineering, Environmental

A basic comprehensive study on synergetic effects among the metal oxides in CeO2-WO3/TiO2 NH3-SCR catalyst

Xuesong Liu et al.

Summary: The study found that the formation of solid solutions and high specific surface area in catalysts would increase the amounts of Ce3+, oxygen vacancies, and acid sites, broadening the operating temperature window of NH3-SCR reaction. This enhances N-2 selectivity by promoting fast SCR reaction at low temperatures and inhibiting the unselective oxidation of NH3 at high temperatures.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Environmental Sciences

Heavy metal poisoning resistance of a Co-modified 3Mn10Fe/Ni low-temperature SCR deNOx catalyst

Baozhong Zhu et al.

Summary: Heavy metals can decrease the deNO(x) activity of catalysts, but this can be effectively improved after Co modification of the poisoned catalysts. The interaction between lead or zinc and lattice oxygen is weakened by Co modification, leading to increased lattice oxygen, high-valence metal elements, reduction ability, and the number of acid sites.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Review Engineering, Environmental

A technical review of bioenergy and resource recovery from municipal solid waste

Sonil Nanda et al.

Summary: This paper reviews various waste-to-energy technologies, including traditional thermal incineration and modern hydrothermal incineration, as well as thermochemical and biological conversion technologies for the transformation of solid waste into biofuel products. Furthermore, it comprehensively discusses the current status, opportunities, and challenges of municipal solid waste management.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Alkali-Resistant Catalytic Reduction of NOx by Using Ce-O-B Alkali-Capture Sites

Pan Zhang et al.

Summary: This study demonstrated alkali-resistant NOx reduction through the Ce-O-B structure and maintained efficient NH3 and NO adsorption/activation on K-poisoned catalysts.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Physical

Unraveling Reactivity Descriptors and Structure Sensitivity in Low-Temperature NH3-SCR Reaction over CeTiOx Catalysts: A Combined Computational and Experimental Study

Bing Liu et al.

Summary: This study focuses on enhancing the performance of ceria-based NH3-SCR catalysts by controlling the surface structure, leading to the successful design and synthesis of Ti-doped CeO2 solid solution catalysts with superior intrinsic activity and SO2-resistant ability. Density functional theory calculations reveal that the NH3-SCR reaction on Ti-doped CeO2 solid solution primarily follows the Eley-Rideal mechanism.

ACS CATALYSIS (2021)

Article Engineering, Environmental

Nb2O5-modified Mn-Ce/AC catalyst with high ZnCl2 and SO2 tolerance for low-temperature NH3-SCR of NO

Yuhan Zhou et al.

Summary: This study found that doping Nb2O5 can enhance the SCR performance and sulfur resistance of Zn-Mn-Ce/AC catalyst, form new acidic sites by preferentially reacting with SO2, promote NH3 adsorption and inhibit SO2 adsorption, which hinders the reaction between NH3 and SO2 and slows the formation of ammonium sulfate channels on the catalyst.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Environmental Sciences

Estimating source strengths of HCl and SO2 emissions in the flue gas from waste incineration

Hua Zhang et al.

JOURNAL OF ENVIRONMENTAL SCIENCES (2019)

Article Chemistry, Physical

Simultaneous removal of NO and Hg0 over Nb-Modified MnTiOx catalyst

Jian Liu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Physical

The poisoning effect of PbO and PbCl2 on CeO2-TiO2 catalyst for selective catalytic reduction of NO with NH3

Ye Jiang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)

Article Chemistry, Physical

The promoted performance of CeO2 catalyst for NH3-SCR reaction by NH3 treatment

Xiao Sun et al.

APPLIED SURFACE SCIENCE (2018)

Article Chemistry, Physical

The enhanced SCR performance of Mn/TiO2 catalyst by Mo modification: Identification of the promotion mechanism

Xiao Sun et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Engineering, Environmental

Impacts of Pb and SO2 Poisoning on CeO2-WO3/TiO2-SiO2 SCR Catalyst

Yue Peng et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)

Article Engineering, Environmental

High calcium resistance of CeO2-WO3 SCR catalysts: Structure investigation and deactivation analysis

Xiang Li et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Review Chemistry, Multidisciplinary

Recent advances in the textural characterization of hierarchically structured nanoporous materials

Katie A. Cychosz et al.

CHEMICAL SOCIETY REVIEWS (2017)

Article Chemistry, Physical

Getting insight into the influence of SO2 on TiO2/CeO2 for the selective catalytic reduction of NO by NH3

Lei Zhang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2015)

Article Chemistry, Physical

New insight into the promoting role of process on the CeO2-WO3/TiO2 catalyst for NO reduction with NH3 at low-temperature

Shule Zhang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2015)

Article Chemistry, Physical

Novel effect of SO2 on the SCR reaction over CeO2: Mechanism and significance

Shijian Yang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2013)

Article Engineering, Environmental

Sintering of MSWI fly ash by microwave energy

Sun-Yu Chou et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

Article Chemistry, Physical

The surface properties and photocatalytic activities of ZnO ultrafine particles

LQ Jing et al.

APPLIED SURFACE SCIENCE (2001)