4.7 Article

Hierarchical NiO/Al2O3 nanostructure for highly effective smoke and toxic gases suppression of polymer Materials: Experimental and theoretical investigation

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

One-dimensional 3d-TM-solophene polymers as high-activity single-atom catalysts for CO oxidation

Xiaoqin Feng et al.

Summary: Based on density functional theory (DFT) calculations, we found that Sc-SP single atom catalyst exhibits the highest catalytic activity for CO oxidation, and its catalytic behavior is independent of different macrocyclic ligands. This provides a new strategy for designing efficient single atom catalysts.

APPLIED SURFACE SCIENCE (2023)

Article Chemistry, Physical

Discerning and modulating critical surface active sites for propane and CO oxidation over Co3O4 based catalyst

Chu-Feng Liu et al.

Summary: Identifying active sites for propane and CO oxidation on Co3O4-based catalysts is crucial for catalyst design. Co3O4/CeO2 shows superior CO oxidation activity due to CeO2 oxygen vacancies promoting O-2 activation, while Co3O4/ZSM-5 exhibits improved propane oxidation activity thanks to the abundant acid sites from ZSM-5. Surface Co3+ species in Co3O4 are discovered to be active sites for both CO and propane activation. The prereduced and post-oxidized Co3O4 catalysts further enhance the activity for both propane and CO oxidation.

APPLIED SURFACE SCIENCE (2023)

Article Engineering, Environmental

Design of novel double-layer coated ammonium polyphosphate and its application in flame retardant thermoplastic polyurethanes

Mei Wan et al.

Summary: A multilayer core-shell flame retardant (APP@SiO2@UiO-66-NH2(Zr)) was developed to improve the smoke suppression and fire resistance of thermoplastic polyurethane (TPU). The composite showed significant reductions in heat release, smoke production, CO yield, and CO2 yield compared to pure TPU. The flame retardant formed protective layers in the residual carbon structure, adsorbed harmful substances, and reduced the generation of combustible volatiles during combustion.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Chemistry, Physical

Noncombustible 7 gm-thick solid polymer electrolyte for highly energy density solid state lithium batteries

Longfei Han et al.

Summary: In this study, an ultra-thin and highly safe PEO/LiTFSI/3% NH4PF6 @PA6 polymer solid electrolyte was prepared. Compared to conventional electrolytes, this polymer electrolyte is only 7 gm thick, leading to lower cell impedance and higher energy density. The Li//PEO/LiTFSI/3% NH4PF6 @PA6//Li cell shows excellent cycling stability at 60 degrees C and the PEO-based electrolyte with 3 wt% NH4PF6 addition exhibits high fire safety, even under extreme conditions.

NANO ENERGY (2023)

Article Engineering, Multidisciplinary

Leaf vein-inspired engineering of MXene@SrSn(OH)6 nanorods towards super-tough elastomer nanocomposites with outstanding fire safety

Jingyi Lu et al.

Summary: The study enhanced the tensile robustness and fire safety of TPU by incorporating SSO nanorods on MXene nanosheets, leading to improved mechanical properties and decreased heat release rate during combustion. The biomimetic leaf vein-inspired structure of TPU-MSSO nanocomposites not only exhibited superior toughness, but also enhanced fire safety, contributing to the prevention of thermal disaster chain formation and enabling further applications in portable devices and flexible electronics packaging.

COMPOSITES PART B-ENGINEERING (2022)

Article Chemistry, Physical

Hindered phenolic antioxidant passivation of black phosphorus affords air stability and free radical quenching

Shuilai Qiu et al.

Summary: This study enhances the environmental stability and flame retardant performance of BP through modification, effectively reducing the fire hazard of TPU. The introduction of BP-HPL significantly reduces the heat release rate and total heat release values of TPU, as well as smoke volume and carbon monoxide production.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Chemistry, Physical

Construction of super-hydrophobic, highly effective flame retardant coating for cotton fabric with superior washability and abrasion resistance

Liangyuan Qi et al.

Summary: A super-hydrophobic flame retardant coating for cotton fabric was developed, showing excellent flame retardancy, abrasion resistance, anti-washing, and self-cleaning properties. The coated cotton fabric also exhibited outstanding char-forming ability, contributing to superior flame retardancy.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Materials Science, Multidisciplinary

Graphite-like Carbon Nitride/Polyphosphoramide Nanohybrids for Enhancement on Thermal Stability and Flame Retardancy of Thermoplastic Polyurethane Elastomers

Yulu Zhu et al.

Summary: This study focuses on enhancing the fire safety of TPUs by reducing heat release rate and smoke emission. The researchers synthesized PDMPD with higher thermal stability and catalytic char formation capacity, and fabricated CPDMPD hybrids. The results showed that the addition of CPDMPD hybrids significantly reduced the peak heat release rate and smoke emission of TPUs.

ACS APPLIED POLYMER MATERIALS (2022)

Article Engineering, Environmental

Fabrication of fire safe rigid polyurethane foam with reduced release of CO and NOx and excellent physical properties by combining phosphine oxide-containing hyperbranched polyol and expandable graphite

Chao Ma et al.

Summary: A novel phosphine oxide-containing hyperbranched polyol was synthesized and incorporated into rigid polyurethane foam. The addition of this polyol resulted in improved compressive strength, decreased density and thermal conductivity, and excellent fire resistance properties.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Biochemistry & Molecular Biology

Phytic Acid-Iron/Laponite Coatings for Enhanced Flame Retardancy, Antidripping and Mechanical Properties of Flexible Polyurethane Foam

Qi Jiang et al.

Summary: To solve the flammability and dripping issues of flexible polyurethane foam (FPUF), a coating was prepared on its surface using phytic acid (PA), Fe-2(SO4)(3)center dot xH(2)O, and laponite (LAP). The FPUF/PA-Fe/LAP showed good flame-retardant performance, passing the UL-94 V-0 rating and reducing the peak heat release rate and maximum smoke density. The fire growth rate index was also significantly reduced. Additionally, the coating had a minor effect on compression and permanent deformation.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Article Chemistry, Physical

Surface Plane Effect of ZnO on the Catalytic Performance of Au/ZnO for the CO Oxidation Reaction

Wei Liu et al.

Summary: In heterogeneous catalysis, the specific surface planes of metals and/or supports play a significant role in catalytic processes. This study demonstrated the surface plane effect of ZnO by synthesizing ZnO nanoplates (p-ZnO) with mostly polar surfaces and ZnO nanorods (r-ZnO) with non-polar surfaces, and using them as supports for Au/ZnO catalysts. The activity of Au/p-ZnO was found to be superior to that of Au/r-ZnO, attributed to the presence of more O2 activation sites on the polar surfaces. Furthermore, Au can activate both polar and non-polar surfaces of ZnO through the creation of oxygen vacancies.

JOURNAL OF PHYSICAL CHEMISTRY C (2022)

Article Materials Science, Multidisciplinary

Poly(dimethyl siloxane)-grafted black phosphorus nanosheets as filler to enhance moisture-resistance and flame-retardancy of thermoplastic polyurethane

Wei Cai et al.

Summary: By synthesizing and grafting cross-linked polydimethylsiloxane (PDMS) onto the surface of black phosphorus (BP) nanosheets, the moist ambient stability and flame retardancy efficiency of the nanosheets are simultaneously improved. With the grafting of PDMS, the BP nanosheets exhibit higher flame retardancy efficiency to thermoplastic polyurethane (TPU), reducing the harmful gases produced during resin combustion.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Article Materials Science, Multidisciplinary

Surface pits stabilized Au catalyst for low-temperature CO oxidation

Ya-Feng Cai et al.

Summary: In this study, an active and stable Au/CeO2 catalyst was prepared using CeO2 with high-density surface pits as the support. The catalyst showed long-term activity at low temperatures and remained stable even after high-temperature calcination. This research may provide a new method to improve the stability of supported metal catalysts.

RARE METALS (2022)

Article Chemistry, Physical

Preferential Oxidation of H2 in CO-Rich Streams over a Ni/γ-Al2O3 Catalyst: An Experimental and First-Principles Microkinetic Study

Mostafa Aly et al.

Summary: The study investigates the selective oxidation of hydrogen in CO-rich streams resembling steel mill gases and finds that high water selectivity can be achieved under certain conditions, reducing the industry's carbon footprint.

ACS CATALYSIS (2022)

Article Materials Science, Multidisciplinary

Ammonium polyphosphate/montmorillonite nanocomposite with a completely exfoliated structure and charring-foaming agent flame retardant thermoplastic polyurethane

Meina Xie et al.

Summary: The use of APP-MMT nanocomposite and CFA improved the flame retardancy and mechanical properties of TPU composites, and enhanced their thermal stability.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2022)

Article Engineering, Environmental

Octopus sucker-inspired hierarchical structure MXene@carbon nanotubes enhancing the mechanical properties and fire safety of thermoplastic polyurethane composites through the interfacial engineering

Pengfei Jia et al.

Summary: This article presents the development of hierarchical structure MXene@carbon nanotubes (M@CN) through electrostatic interactions to improve the interfacial engineering of thermoplastic polyurethane (TPU). The TPU/M@CN-3 nanocomposites displayed a biomimetic structure that enhanced the tensile strength and elongation at break. In addition, the hierarchical structure of M@CN greatly reinforced the fire safety of the TPU nanocomposites.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Manufacturing

Interface assembly of flower-like Ni-MOF functional MXene towards the fire safety of thermoplastic polyurethanes

Mei Wan et al.

Summary: This study successfully fabricated three-dimensional flower-like Ni-MOFs and functionalized MXene for use in thermoplastic polyurethanes, improving flame retardancy and smoke suppression properties.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Article Chemistry, Physical

Coke-resistant Ni-based bimetallic catalysts for the dry reforming of methane: effects of indium on the Ni/Al2O3 catalyst

Chuanshen Wang et al.

Summary: In this study, Ni-In/γ-Al2O3 catalysts were prepared and used for the dry reforming of methane, and it was found that the catalyst with a Ni/In ratio of 3/2 exhibited the optimal conversion activity and stability. The addition of In increased the oxygen species and oxygen vacancy amounts on the catalyst, enhancing the CO2 conversion rate and reducing carbon deposition by promoting Ni particle dispersion and inhibiting agglomeration.

CATALYSIS SCIENCE & TECHNOLOGY (2022)

Article Chemistry, Applied

Support effects of Cs/Al2O3 catalyzed aldol condensation of methyl acetate with formaldehyde

Hongqin Ma et al.

Summary: The study explores the support effects of cesium catalysts on the vapor-phase aldol condensation of MeOAc with HCHO using Al2O3 with different morphologies and crystal phases. The research shows that a balance between acidic and basic sites is crucial for the production of MA in this reaction.

CATALYSIS TODAY (2021)

Article Engineering, Environmental

Interfacial flame retardant unsaturated polyester composites with simultaneously improved fire safety and mechanical properties

Shenghe Zhang et al.

Summary: The main problems of low flame retardant efficiency and poor interfacial property in glass-fiber reinforced unsaturated resin (GUPR) composites are effectively solved by grafting modified silane coupling agent on the surface of glass fiber and adding multi-element hybrid flame retardant to matrix. By increasing the addition of flame retardant and using plasma treatment, the fire safety performance and mechanical properties of the materials are significantly improved.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Manufacturing

Highly efficient MXene/Nano-Cu smoke suppressant towards reducing fire hazards of thermoplastic polyurethane

Yongqian Shi et al.

Summary: The study aimed to reduce the generation of smoke and toxic gases from polymeric materials burning by incorporating a Ti3C2Tx/nano-copper smoke suppressant into TPU nanocomposites. This led to enhanced high-temperature stability and significantly decreased smoke and toxic gas production from TPU.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Engineering, Multidisciplinary

MXene based core-shell flame retardant towards reducing fire hazards of thermoplastic polyurethane

Chuan Liu et al.

Summary: This study introduced a novel method to enhance the fire safety of TPU composites by functionalizing APP with Ti3C2Tx and CS, resulting in improved thermal stability and reduced heat and smoke release. The synergistic effect between APP@CS and Ti3C2Tx, combined with the trapping effect of APP@CS, significantly enhanced the fire resistance of the polymeric material.

COMPOSITES PART B-ENGINEERING (2021)

Article Chemistry, Physical

Dopamine-modified poly(styrene) nanospheres as new high-speed adsorbents for copper-ions having enhanced smoke-toxicity-suppression and flame-retardancy

Ziyu Jin et al.

Summary: Polydopamine-coated polystyrene (PS@PDA) nanospheres exhibit excellent Cu2+ adsorption capacity, which can be further used to prepare PS nanocomposites with enhanced flame retardancy. A new evaluation system based on analytic hierarchy process is introduced for comprehensive analysis of fire safety of samples, showing that PS@PDA absorption of Cu2+ leads to reduced smoke and toxic gas production, improving overall fire safety performance.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Physical

Smoke suppressant in flame retarded thermoplastic polyurethane composites: Synergistic effect and mechanism study

Hongyuan Ren et al.

Summary: The combination of APP and MgFe-LDH effectively reduced smoke density, production rate, and heat release rate of TPU composites. MgFe-LDH also showed high efficiency in decreasing total volatile products and toxic volatiles.

NANO RESEARCH (2021)

Article Chemistry, Inorganic & Nuclear

Influence of preparation method on catalytic performance of three-dimensionally ordered macroporous NiO-CuO for CO oxidation

Ali Rastegarpanah et al.

Summary: The three-dimensionally ordered macroporous (3DOM) nickel-copper mixed oxides prepared using the dual-templating method exhibited high catalytic activity and stability for CO oxidation, attributed to their large surface area, high oxygen adspecies concentration, good low-temperature reducibility, and unique nanovoid 3DOM structure.

JOURNAL OF SOLID STATE CHEMISTRY (2021)

Article Materials Science, Composites

Chemically inorganic modified ammonium polyphosphate as eco-friendly flame retardant and its high fire safety for epoxy resin

Zhu-Bao Shao et al.

Summary: An eco-friendly and efficient flame retardant for epoxy resin, Fe@APP, was successfully prepared through a chemical modification process. The addition of 5 wt% Fe@APP effectively reduced heat and smoke release of EP composites. The catalytic properties of iron (III) in promoting char formation and fire safety of the EP composite were also demonstrated.

COMPOSITES COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Thermal CO Oxidation and Photocatalytic CO2 Reduction over Bare and M-Al2O3 (M = Co, Ni, Cu, Rh, Pd, Ag, Ir, Pt, and Au) Cotton-Like Nanosheets

Hee Jung Yoon et al.

Summary: In this study, gamma-Al2O3 nanosheets were prepared and loaded with various transition metals, and their catalytic activities in thermal CO oxidation and photocatalytic CO2 reduction were fully examined. It was found that Rh, Pd, Ir, and Pt-loading led to significant enhancement in CO oxidation activity. Ag-Al2O3 nanosheets showed the highest performance in CO2 reduction experiments.

NANOMATERIALS (2021)

Article Chemistry, Physical

Tuning Ni3+quantity of NiO via doping of cations with varied valence states: The key role of Ni3+on the reactivity

Peiru Zheng et al.

Summary: The research reveals that different dopant cations can affect the surface Ni3+ generation in NiO catalysts, which in turn affects their reactivity. Li+ doping promotes the generation of Ni3+, while Zn2+ and Cr3+ doping decreases it. The quantity of surface Ni3+ is directly proportional and linearly related to the reactivity.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Multidisciplinary

A DFT study of the CO adsorption and oxidation at ZnO surfaces and its implication for CO detection

Zibin Ni et al.

CHINESE CHEMICAL LETTERS (2020)

Article Engineering, Multidisciplinary

Halogen and halogen-free flame retarded biologically-based polyamide with markedly suppressed smoke and toxic gases releases

Tongmin Cai et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Chemistry, Physical

3D ordered honeycomb-shaped CuO•Mn2O3: Highly active catalysts for CO oxidation

Ali Rastegarpanah et al.

MOLECULAR CATALYSIS (2020)

Article Engineering, Multidisciplinary

Creating MXene/reduced graphene oxide hybrid towards highly fire safe thermoplastic polyurethane nanocomposites

Chuan Liu et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Chemistry, Physical

Effects of alumina morphology on dry reforming of methane over Ni/Al2O3 catalysts

Dongyang Shen et al.

CATALYSIS SCIENCE & TECHNOLOGY (2020)

Article Chemistry, Physical

Ni and Ni3C catalysts supported on mesoporous silica for dry reforming of methane

J. G. Roblero et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Multidisciplinary Sciences

Synthesis of liquid fuel via direct hydrogenation of CO2

Zhenhong He et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)

Article Chemistry, Physical

Highly Water-Resistant La-Doped Co3O4 Catalyst for CO Oxidation

Junemin Bae et al.

ACS CATALYSIS (2019)

Review Engineering, Multidisciplinary

Intrinsically flame retardant bio-based epoxy thermosets: A review

Xin Wang et al.

COMPOSITES PART B-ENGINEERING (2019)

Review Nanoscience & Nanotechnology

Advances in transition metal oxide catalysts for carbon monoxide oxidation: a review

Subhashish Dey et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)

Review Polymer Science

Polymer nanocomposites from modified clays: Recent advances and challenges

Moumita Kotal et al.

PROGRESS IN POLYMER SCIENCE (2015)