☆ 4.6 Article

Process Optimization of Polishing Titanium Alloy Material with a Pulsating Air Jet

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Coatings & Films

Experimental investigation into the effect of process parameters on the Inconel 718 surface integrity for abrasive waterjet peening

Zhao Wang et al.

Summary: The influence of different AWJP parameters on the surface integrity of Inconel 718 alloy was investigated. The results showed that pump pressure and standoff distance had the greatest impact on surface integrity, while flowrate and traverse speed had a smaller effect. The AWJP-treated workpiece formed a footprint width of 3.0-4.3 mm, with the maximum surface roughness occurring at a pump pressure of 300 MPa. The thickness of the stress layer was approximately 100-180 μm, and the maximum compressive residual stress was larger than 1100 MPa. Pump pressure had a significant effect on microhardness, and the maximum hardness increased by more than 20%.

SURFACE & COATINGS TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Chemical

A new method for polishing the inner wall of a circular tube with a soft abrasive rotating jet

Jun Zhao et al.

Summary: The traditional polishing method for the inner wall of a tube has limitations in tool size and geometric constraints. This paper proposes a new method called soft abrasive rotating jet polishing (SARJP) to overcome these limitations and optimize the polishing process. By combining the Taguchi method and response surface technique, the speed and quality of the optimization process were improved. Mathematical statistics and graph tools were used to assess the influence of various factors on the roughness of the inner wall of the tube.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Multiphase Flow Field Analysis and Experimental Study of Pulsating Air Jet Polishing

Lei Zhang et al.

Summary: In this article, a new method of pulsating air jet polishing (PAJP) is proposed to address the shortcomings of existing fluid polishing methods. The effects of various parameters on the removal depth and surface roughness of titanium alloys are analyzed through a combination of numerical simulation and experimental studies, leading to the optimization of the PAJP process parameters.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2022)

添加到收藏夹

Article Engineering, Industrial

A new modelling method of material removal profile for electrorheological polishing with a mini annular integrated electrode

Cheng Fan et al.

Summary: This paper addresses the problem of material removal in electrorheological (ER) polishing with a mini annular integrated electrode both theoretically and experimentally. The model of the material removal profile in ER polishing is proposed and validated through experiments, demonstrating its high prediction accuracy.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

添加到收藏夹

Article Automation & Control Systems

Removal mechanism of submerged air jet polishing considering the state of abrasive particles

Lei Zhang et al.

Summary: This paper proposes a novel polishing method called submerged air jet polishing (SAJP). The microscopic theoretical model of SAJP is established based on the micro-cutting model of the single abrasive particle. The erosion removal mechanism of SAJP processing titanium alloy and the material removal mechanism under different process parameters are studied from a microscopic perspective.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Influence of submerged micro-abrasive waterjet peening on surface integrity and fatigue performance of TA19 titanium alloy

Shu-Lei Yao et al.

Summary: This study investigates the influence of submerged micro-abrasive waterjet peening (SMA-WJP) on the surface integrity and fatigue properties of TA19 titanium alloy. The results show that SMA-WJP treatment forms a plastic deformation layer and compressive residual stress layer, improving the surface integrity and fatigue life. Additionally, nanocrystals and high density of dislocations are formed on the surface of the SMA-WJP treated specimen.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

添加到收藏夹

Article Engineering, Mechanical

Investigation into a novel pulsating cavitation air jet polishing method for Ti-6Al-4V alloy

Lei Zhang et al.

Summary: This study investigates a novel pulsating cavitation air jet polishing (PCAJP) process to improve the material removal rate and surface quality of Ti-6Al-4V alloy. By optimizing the main process parameters, the roughness of the specimens is successfully reduced to a lower level.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Optics

Six-directional pseudorandom consecutive unicursal polishing path for suppressing mid-spatial frequency error and realizing consecutive uniform coverage

Qizhi Zhao et al.

APPLIED OPTICS (2019)

添加到收藏夹

Article Engineering, Manufacturing

A study of the micro-hole geometry evolution on glass by abrasive air-jet micromachining

Huaizhong Li et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Inverse methods to gradient etch three-dimensional features with prescribed topographies using abrasive jet micro-machining: Part I - Modeling

M. R. Sookhak Lari et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Inverse methods to gradient etch three-dimensional features with. prescribed topographies using abrasive jet micro-machining: Part II-Verification with micro-machining experiments

M. R. Sookhak Lari et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)

添加到收藏夹

Article Computer Science, Artificial Intelligence

A process prediction model based on Cuckoo algorithm for abrasive waterjet machining

Azizah Mohamad et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2015)

添加到收藏夹

Article Materials Science, Ceramics

Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box-Behnken design

Dun Liu et al.

CERAMICS INTERNATIONAL (2014)

添加到收藏夹

Article Engineering, Manufacturing

Investigation on Surface Roughness in Abrasive Water-Jet Machining by the Response Surface Method

M. Naresh Babu et al.

MATERIALS AND MANUFACTURING PROCESSES (2014)

添加到收藏夹

Proceedings Paper Engineering, Industrial

Process Analysis of Water Abrasive Fine Jet Structuring of Ceramic Surfaces via Design of Experiment

M. Dittrich et al.

6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014) (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Perspectives on Titanium Science and Technology

Dipankar Banerjee et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Optics

Optimization and application of influence function in abrasive jet polishing

Zhaoze Li et al.

APPLIED OPTICS (2010)

添加到收藏夹

Article Engineering, Industrial

A new model for predicting the depth of cut in abrasive waterjet contouring of alumina ceramics

J. Wang

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Industrial

Workpiece surface integrity of Ti-6-4 heat-resistant alloy when employing different polishing methods

D. A. Axinte et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Optics

Surface roughness and material removal in fluid jet polishing

Hui Fang et al.

APPLIED OPTICS (2006)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Surface roughness and fatigue performance of commercially pure titanium and Ti-6Al4V alloy after different polishing protocols

AS Guilherme et al.

JOURNAL OF PROSTHETIC DENTISTRY (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.