☆ 4.7 Article

Solid-liquid rotary kilns: An experimental and CFD-DEM study

POWDER TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Toward High-Order CFD-DEM: Development and Validation

Toni El Geitani et al.

Summary: CFD-DEM is a computational method used for simulating solid-fluid systems. We have developed a unified finite element CFD-DEM solver that integrates the CFD and DEM solvers into a single software, resulting in faster and more efficient coupling between the solvers.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2023)

添加到收藏夹

Article Engineering, Chemical

In-depth validation of unresolved CFD-DEM simulations of liquid fluidized beds

Victor O. Ferreira et al.

Summary: In this study, the accuracy of the unresolved CFD-DEM method was evaluated by comparing simulated and experimental results of a pilot-scale cylindrical liquid-solid fluidized bed. Different densities of particles were used to test various flow regimes. The comparison between experimental and simulated particles' dynamics revealed the importance of the Saffman lift force in predicting particle dispersion and preventing unphysical plumes. The results showed that the unresolved CFD-DEM method is valid for simulating liquid-solid fluidized beds.

POWDER TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Chemical

Dynamics of fabric and dryer sheet motion in domestic clothes dryers

C. R. Jones et al.

Summary: Positron emission particle tracking (PEPT) was used to study the motion of radioactively labeled tracer particles attached to fabrics and solid fabric enhancer (SFE) delivery articles in domestic clothes dryers. Different movement behaviors of fabrics and SFE delivery articles were observed within the dryer drum, with fabrics primarily exhibiting cataracting motion while SFE delivery articles tended towards centrifuging and cascading flows.

DRYING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Chemical

Modelling of gas-solid-liquid flow and particle mixing in a rotary drum

Xinxin Tang et al.

Summary: In this work, a computational fluid dynamics-discrete element method-data coupled with volume of fluid is developed to describe the gas-solid-liquid flow and mixing behaviors in a rotary drum. The effects of liquid presence and rotating speed on the mixing performance are studied.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Chemical

Experiments and CFD-DEM simulations of fine kaolinite particle sedimentation dynamic characteristics in a water environment

Kai Lv et al.

Summary: This study investigates the dynamic characteristics of fine kaolinite particle sedimentation using experimental and computational methods. The results show that particle shape and liquid properties significantly affect sedimentation, and the modified spherical coefficient can effectively predict particle terminal velocity.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Geochemistry & Geophysics

Semi-Autogenous Wet Grinding Modeling with CFD-DEM

Vladislav Lvov et al.

Summary: This paper demonstrates the features and methods of constructing a wet semi-autogenous grinding mill model using Rocky DEM and Ansys Fluent software. It also proposes a method for calculating the efficiency of the semi-autogenous grinding process based on numerical simulation results.

MINERALS (2021)

添加到收藏夹

Review Engineering, Chemical

Experimental methods in chemical engineering: Unresolved CFD-DEM

Ariane Berard et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Advanced comminution modelling: Part 2-Mills

Paul W. Cleary et al.

APPLIED MATHEMATICAL MODELLING (2020)

添加到收藏夹

Article Computer Science, Software Engineering

Lethe: An open-source parallel high-order adaptative CFD solver for incompressible flows

Bruno Blais et al.

SOFTWAREX (2020)

添加到收藏夹

Article Engineering, Chemical

DEM parameter calibration of cohesive bulk materials using a simple angle of repose test

Thomas Roessler et al.

PARTICUOLOGY (2019)

添加到收藏夹

Article Engineering, Chemical

A methodology for calibration of DEM input parameters in simulation of segregation of powder mixtures, a special focus on adhesion

Mohammadreza Alizadeh et al.

POWDER TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Chemical

CFD-DEM investigation of viscous solid-liquid mixing: Impact of particle properties and mixer characteristics

Bruno Blais et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2017)

添加到收藏夹

Article Engineering, Chemical

Lattice-Boltzmann simulation of fluid flow through packed beds of uniform spheres: Effect of porosity

L. W. Rong et al.

CHEMICAL ENGINEERING SCIENCE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development and validation of calibration methods for discrete element modelling

Andrew Phillip Grima et al.

GRANULAR MATTER (2011)

添加到收藏夹

Article Engineering, Chemical

Mixing large and small particles in a pilot scale rotary kiln

Anders Rooma Nielsen et al.

POWDER TECHNOLOGY (2011)

添加到收藏夹

Article Engineering, Aerospace

Lift of a solid spherical particle subject to vorticity and/or spin

E. Loth

AIAA JOURNAL (2008)

添加到收藏夹

Article Food Science & Technology

Viscosity of aqueous carbohydrate solutions at different temperatures and concentrations

V. R. N. Telis et al.

INTERNATIONAL JOURNAL OF FOOD PROPERTIES (2007)

添加到收藏夹

Article Engineering, Chemical

A comparison of discrete element simulations and experiments for 'sandpiles' composed of spherical particles

YJ Li et al.

POWDER TECHNOLOGY (2005)

添加到收藏夹

Article Engineering, Chemical

Numerical simulation of solids suspension in a stirred tank

JJ Derksen

AICHE JOURNAL (2003)

添加到收藏夹

Article Engineering, Chemical

Solid-liquid mass transfer in a rotary drum

TG Parsons et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2001)

添加到收藏夹

Article Mechanics

Particle-wall collisions in a viscous fluid

GG Joseph et al.

JOURNAL OF FLUID MECHANICS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.