4.7 Article

Parametric study of an active-passive system for cooling application in buildings improved with free cooling for enhanced solidification

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Numerical analysis of thin building envelope-integrated phase change material towards energy-efficient buildings in severe hot location

Qudama Al-Yasiri et al.

Summary: Phase change materials (PCMs) have the potential to improve building thermal comfort and save energy in energy-efficient buildings. This study evaluates the passive use of PCM in a thin building envelope in a severely hot location using EnergyPlus software. The results show that PCM effectively reduces temperature fluctuations, levels thermal load, and reduces operative temperature. The integration of PCM also leads to significant energy-saving and environmental benefits, including CO2 emission reduction and electricity cost savings.

SUSTAINABLE CITIES AND SOCIETY (2023)

Article Construction & Building Technology

Energy and thermo-economic analysis of PCM integrated brick in composite climatic condition of Jaipur- A numerical study

Pranjal Agarwal et al.

Summary: The use of phase change materials (PCM) in buildings to improve thermal comfort and reduce energy consumption has become more widespread in recent decades. This study investigated the thermal performance of n-Eicosane and OM35 incorporated in clay bricks. Numerical analysis was conducted to optimize the configuration by varying the positions and thicknesses of the PCM. The results showed that the economic feasibility of PCM installations differed depending on the wall orientation and indoor conditions.

SUSTAINABLE CITIES AND SOCIETY (2023)

Review Construction & Building Technology

Thermal performance of the building envelope integrated with phase change material for thermal energy storage: an updated review

Pushpendra Kumar Singh Rathore et al.

Summary: This study discusses the thermophysical properties of building envelope and building materials, with a focus on the applicability of phase change materials (PCM) in building envelopes. It provides an overview of the latest literature in which PCM is directly incorporated in building materials and offers future recommendations based on identified research gaps.

SUSTAINABLE CITIES AND SOCIETY (2022)

Article Construction & Building Technology

Experimental investigation of air-based active-passive system for cooling application in buildings

E. Zavrl et al.

Sustainable Cities and Society (2022)

Article Energy & Fuels

Enhancing performance of building elements with phase change materials for cooling with air-based systems

Eva Zavrl et al.

Summary: This literature review focuses on enhancing the performance of phase change material (PCM) integrated into building elements for cooling through nighttime ventilation. It addresses the issue of building overheating in summer and explores possible solutions. The review also discusses improved PCM discharge cycles and the application of ventilated building elements. Conclusions are drawn based on the reviewed studies.

JOURNAL OF ENERGY STORAGE (2022)

Article Energy & Fuels

Experimental study on the thermal performance of composite phase change ventilated roof

Mingdong Hou et al.

Summary: With the improvement of people's living standards, building energy consumption is increasing year by year. Phase-change energy storage technology can greatly reduce the energy consumption of building heating and air conditioning systems. Different summer experiments show that ventilated roofs with multiple phase change materials can effectively reduce indoor temperature fluctuations and energy consumption.

JOURNAL OF ENERGY STORAGE (2021)

Article Construction & Building Technology

Numerical analysis of phase change materials for optimizing the energy balance of a nearly zero energy building

Rosa Francesca De Masi et al.

SUSTAINABLE CITIES AND SOCIETY (2020)

Article Construction & Building Technology

Improving the energy efficiency of passive PCM system using controlled natural ventilation

Mohit Prabhakar et al.

ENERGY AND BUILDINGS (2020)

Article Construction & Building Technology

Thermal performances of glazed energy storage systems with various storage materials: An experimental study

Benjamin Durakovic et al.

SUSTAINABLE CITIES AND SOCIETY (2019)

Article Construction & Building Technology

Simulation and performance analysis of an active PCM-heat exchanger intended for building operation optimization

Navid Morovat et al.

ENERGY AND BUILDINGS (2019)

Article Construction & Building Technology

An innovative PCM system for thermal comfort improvement and energy demand reduction in building under different climate conditions

Mohamad Ahangari et al.

SUSTAINABLE CITIES AND SOCIETY (2019)

Article Construction & Building Technology

Cardinal orientation and melting temperature effects for PCM-enhanced light-walls in different climates

Amirreza Fateh et al.

SUSTAINABLE CITIES AND SOCIETY (2019)

Article Construction & Building Technology

A new ventilated window with PCM heat exchanger-Performance analysis and design optimization

Yue Hu et al.

ENERGY AND BUILDINGS (2018)

Article Construction & Building Technology

Simulation research on the dynamic thermal performance of a novel triple-glazed window filled with PCM

Shuhong Li et al.

SUSTAINABLE CITIES AND SOCIETY (2018)

Article Construction & Building Technology

Lightweight composite timber facade wall with improved thermal response

Ciril Arkar et al.

SUSTAINABLE CITIES AND SOCIETY (2018)

Editorial Material Construction & Building Technology

Overheating in buildings: lessons from research

Kevin J. Lomas et al.

BUILDING RESEARCH AND INFORMATION (2017)

Article Energy & Fuels

Validation of Calibrated Energy Models: Common Errors

German Ramos Ruiz et al.

ENERGIES (2017)

Article Construction & Building Technology

High resolution mapping of overheating and mortality risk

C. Liu et al.

BUILDING AND ENVIRONMENT (2017)

Article Construction & Building Technology

Experimental study of an active slab with PCM coupled to a solar air collector for heating purposes

Lidia Navarro et al.

ENERGY AND BUILDINGS (2016)

Article Construction & Building Technology

Simulating the Inter-Building Effect on energy consumption from embedding phase change materials in building envelopes

Yilong Han et al.

SUSTAINABLE CITIES AND SOCIETY (2016)

Article Construction & Building Technology

Experimental research on the dynamic thermal performance of a novel triple-pane building window filled with PCM

Shuhong Li et al.

SUSTAINABLE CITIES AND SOCIETY (2016)

Article Thermodynamics

Parametrical analysis of latent heat and cold storage for heating and cooling of rooms

E. Osterman et al.

APPLIED THERMAL ENGINEERING (2015)

Article Construction & Building Technology

Thermal simulation and system optimization of a chilled ceiling coupled with a floor containing a phase change material (PCM)

J. F. Belmonte et al.

SUSTAINABLE CITIES AND SOCIETY (2015)

Article Construction & Building Technology

A ventilated cooling ceiling with integrated latent heat storage-Monitoring results

Helmut Weinlaeder et al.

ENERGY AND BUILDINGS (2014)

Article Energy & Fuels

Ventilated active facades with PCM

Gonzalo Diarce et al.

APPLIED ENERGY (2013)

Article Construction & Building Technology

Thermal analysis of a ventilated facade with PCM for cooling applications

Alvaro de Gracia et al.

ENERGY AND BUILDINGS (2013)

Article Construction & Building Technology

Simulation of energy storage system with phase change material (PCM)

Mohammad Rostamizadeh et al.

ENERGY AND BUILDINGS (2012)

Article Thermodynamics

Heat transfer and pressure drop studies on a PCM-heat exchanger module for free cooling applications

V. Antony Aroul Raj et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2011)