☆ 4.7 Article

Mechanism of retaining graphite phase in the graphite/SiC composite by condense layer with fine SiC grain reaction formed via nano carbon black

CERAMICS INTERNATIONAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Ceramics

Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties

Rida Zhao et al.

Summary: RMI-C/SiC composites fabricated using a carbon fiber reinforced nanoporous carbon matrix preform demonstrate high performance with dense and pure SiC matrix and intact carbon fibers. In contrast, composites based on conventional pyrocarbon or resin carbon matrixes show poorer properties with less SiC, residual silicon and carbon, and corroded fibers. This work opens up a new way for the development of high-performance ceramic matrix composites by siliconizing C/C preforms with nanoporous carbon matrix.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

添加到收藏夹

Article Materials Science, Ceramics

Structural characteristics and ablative behavior of YF3 modified C/C-ZrC-SiC composites and their preparation by molten salt assisted reactive melt infiltration

Yuzhu Shen et al.

Summary: YF3 modified C/C-ZrC-SiC composites were prepared using molten salt assisted reactive melt infiltration, and the infiltration mechanism and ablative behavior were discussed. YF3 effectively seals existing pores and cracks in C/C-ZrC-SiC material. During ablation, YF3 modified composites form yttrium oxide stabilized zirconia, resulting in reduced mass ablation rate and linear ablation rate.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication method and mechanical properties of biomimetic Cf/ZrB2-SiC ceramic composites with bouligand structures

Yumin An et al.

Summary: In this study, biomimetic Cf/ZrB2-SiC ceramic composites with bouligand structures were successfully fabricated by combining precursor impregnation, coating, helical assembly, and hot-pressing sintering. Analysis of the microstructures and carbon fiber content revealed that the coated ceramic layer can heal cracks and improve the mechanical properties, while the mechanical properties can be tuned by the carbon fiber content. This research is of great importance for the development of biomimetic ceramic composites.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

添加到收藏夹

Article Chemistry, Physical

Anisotropic friction behavior of aligned and oriented graphite flakes/copper composite

Baoqiang Hou et al.

Summary: This study prepared and tested graphite flakes/copper composites with specific dihedral angles, showing an increase in friction coefficient with larger dihedral angles due to adhesion, and a decrease due to ploughing. The friction coefficients were lower at 30 to 60 degrees, and the wear rate decreased monotonically as the dihedral angle increased.

CARBON (2022)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication of carbon-coated boron carbide particle and its role in the reaction bonding of boron carbide by silicon infiltration

Cuiping Zhang et al.

Summary: Carbon-coated boron carbide particles were fabricated to tackle the dissolution problem in the silicon infiltration process, leading to an increase of 26% in Vickers hardness, 45% in flexural strength and 37% in fracture toughness of the composites.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structure evolution and ablative mechanism of C/C-ZrC-ZrxCuy composites with low porosity fabricated by pressure assisted reactive melt infiltration

Yuanqi Weng et al.

Summary: C/C-ZrC-ZrxCuy composites were fabricated using the PARMI process, yielding a matrix with three different ZrC-ZrxCuy regions and sequentially decreasing ZrC particle sizes. The heat-absorbing effect of the Cu phase slowed down surface temperature increase during 30 seconds of ablation. After 60 seconds of ablation, the porous ZrO2 skeleton transformed into a protective integrated cover, reducing the ablation rates of the composites significantly.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Materials Science, Ceramics

An efficient and low-cost liquid silicon infiltration method to prepare SiC-coated carbon short fiber for fiber protection of Cf/SiC ceramic matrix composites

Jie Tang et al.

Summary: Liquid silicon infiltration (LSI) is a fast and cost-effective method for manufacturing C-f/SiC composites, but protection of carbon fibers is needed due to high reactivity. A preparation method for C-f@SiC short fibers as fiber protection in LSI process was reported, successfully constructing silicon carbide layers on carbon fibers.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Mechanical

Graphite-based solid lubricant for high-temperature lubrication

Wenjuan Huai et al.

Summary: In this study, a new type of eco-friendly high-temperature graphite-based solid lubricant was successfully developed, which exhibited excellent tribological properties with a very low friction coefficient and good wear protection for workpieces under high temperature conditions in the air atmosphere. Analytical techniques revealed the presence of solid lubricant graphite in the lubricating coating after high-temperature friction tests, and a synergistic effect between the protective surface film and the solid lubricant graphite was proposed to explain the superior lubricating performance.

FRICTION (2021)

添加到收藏夹

Article Materials Science, Ceramics

On the effects of hot spot formation during MW-assisted synthesis of Cf/SiC composites by reactive melt infiltration: Experimental simulations through high temperature treatments

M. Caccia et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Graphite-Si-SiC ceramics produced by microwave assisted reactive melt infiltration

Elisa Padovano et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Chemistry, Physical

Key Parameters in the Manufacture of SiC-Based Composite Materials by Reactive Melt Infiltration

Mario Caccia et al.

MATERIALS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Tribological behaviour of self-lubricating materials at high temperatures

Hector Torres et al.

INTERNATIONAL MATERIALS REVIEWS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Carbon fiber/SiC composites modified SiC nanowires with improved strength and toughness

Fang He et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Chemistry, Physical

Si/SiC optical coatings for C/SiC composites via gel-casting and gas silicon infiltration: Effects of carbon black content

Lu-ming Huang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Materials Science, Ceramics

Dual layer SiC coating on matrix graphite sphere prepared by pack cementation and fluidized-bed chemical vapor deposition

Ping Zhou et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Materials Science, Ceramics

Effect of a Change in the Structural Parameters of Pitch Coke During Heat Treatment on Its Interaction with a Silicon Melt

I. A. Bubenkov et al.

REFRACTORIES AND INDUSTRIAL CERAMICS (2017)

添加到收藏夹

Article Materials Science, Ceramics

Effects of SiC whiskers on the mechanical properties and microstructure of SiC ceramics by reactive sintering

Ning Song et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication and mechanical properties of multi-walled carbon nanotube reinforced reaction bonded silicon carbide composites

Ning Song et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Surface growth for molten silicon infiltration into carbon millimeter-sized channels: Lattice-Boltzmann simulations, experiments and models

Danilo Sergi et al.

INTERNATIONAL JOURNAL OF MODERN PHYSICS C (2016)

添加到收藏夹

Article Materials Science, Ceramics

Micro Four-Layer SiC Coating on Matrix Graphite Spheres of HTR Fuel Elements by Two-Step Pack Cementation

Ping Zhou et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

Comparison of the oxidation behaviors of SiC coatings on C/C composites prepared by pack cementation and chemical vapor deposition

Lu Li et al.

SURFACE & COATINGS TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Ceramics

Towards optimization of SiC/CoSi2 composite material manufacture via reactive infiltration: Wetting study of Si-Co alloys on carbon materials

M. Caccia et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

添加到收藏夹

Article Materials Science, Ceramics

In situ reactive fabrication of ZrC-SiC coating on Cf/ZrC-SiC composite

Qinggang Li et al.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Reactions Between Silicon and Graphite Substrates at High Temperature: In Situ Observations

Jesse F. White et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Reciprocating friction and wear properties of mesocarbon microbeads-based graphite and siliconized graphite

Hongyan Xia et al.

JOURNAL OF NUCLEAR MATERIALS (2013)

添加到收藏夹

Article Materials Science, Ceramics

Effect of carbon particle and carbon fiber on the microstructure and mechanical properties of short fiber reinforced reaction bonded silicon carbide composite

Shuang Li et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)

添加到收藏夹

Article Materials Science, Ceramics

Reactivity between liquid Si or Si alloys and graphite

Rayisa Voytovych et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Pressureless infiltration versus wetting in AlSi/graphite system

N. R. Calderon et al.

JOURNAL OF MATERIALS SCIENCE (2010)

添加到收藏夹

Article Chemistry, Physical

The combined effect of porosity and reactivity of the carbon preforms on the properties of SiC produced by reactive infiltration with liquid Si

N. R. Calderon et al.

CARBON (2009)

添加到收藏夹

Article Engineering, Mechanical

Tribological properties of solid lubricants (graphite, h-BN) for Cu-based P/M friction composites

Baiming Chen et al.

TRIBOLOGY INTERNATIONAL (2008)

添加到收藏夹

Article Materials Science, Coatings & Films

Structure of SiC coatings from polycarbosilane on graphite for fuel element matrix of high temperature gas-cooled reactor

ZQ Fu et al.

SURFACE & COATINGS TECHNOLOGY (2006)

添加到收藏夹

Article Chemistry, Physical

The effect of porous carbon preform and the infiltration process on the properties of reaction-formed SiC

YX Wang et al.

CARBON (2004)

添加到收藏夹

Article Materials Science, Ceramics

Composite ceramics in sliding contact tribological properties of silicon carbide and silicon carbide-graphite

Y Zhou et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.