4.7 Article

Bio-inspired multi-joint-collaborative vibration isolation

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Mechanical

3D printed metamaterials for damping enhancement and vibration isolation: Schwarzites

Sudheendra Herkal et al.

Summary: Schwarzites are 3D solids with negative Gaussian curvatures that possess unique mechanical properties such as high ductility and strength. The energy dissipation mechanism of Schwarzites allows for the removal of energy from dynamic systems and reduction of system response. Experimental results show that Schwarzite geometry can increase the damping ratio by almost 80% with the same material volume as a solid support. Additionally, Schwarzites exhibit vibration isolation properties.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Article Engineering, Mechanical

A high-static-low-dynamics stiffness vibration isolator via an elliptical ring

Wen-Ju Han et al.

Summary: An elliptical ring is used to implement a novel type of high-static-low-dynamic vibration isolation system, with force-displacement relation derived from mathematical theories and experimentally validated. Furthermore, a dynamic equation is established, revealing the high-static-low-dynamic stiffness of the elliptical ring isolator, and the displacement transmissibility can be predicted using the harmonic balance method.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Engineering, Mechanical

An origami inspired quasi-zero stiffness vibration isolator using a novel truss-spring based stack Miura-ori structure

Kan Ye et al.

Summary: In this study, an origami-inspired vibration isolator with quasi-zero-stiffness (QZS) property is proposed using a truss-spring based stack Miura-ori (TS-SMO) structure. The unique structure uses coil spring sets to replace deformable creases, improving physical realization in engineering applications. Nonlinear force response and QZS feature are achieved through geometric nonlinearity and specific Poisson's ratio profile, with isolation performance discussed under variable viscous damping effects.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Engineering, Mechanical

Bio-inspired toe-like structure for low-frequency vibration isolation

Ge Yan et al.

Summary: A novel bio-inspired toe-like structure is developed for low-frequency vibration isolation, possessing favorable high static and low dynamic stiffness characteristics. It effectively isolates low frequency vibration loads and provides a feasible approach to passive vibration control in the low frequency band.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Acoustics

Bionic paw-inspired structure for vibration isolation with novel nonlinear compensation mechanism

Ge Yan et al.

Summary: Inspired by the compensation effect of fat pad on toes in a paw of digitigrade, a unique paw inspired structure is proposed and investigated for passive vibration isolation. The structure consists of a toe-like structure simulated by rods and a spring, and a fat pad simulated by repulsive magnets. The structure can achieve quasi-zero stiffness and low-frequency vibration isolation.

JOURNAL OF SOUND AND VIBRATION (2022)

Article Acoustics

Magnetically modulated sliding structure for low frequency vibration isolation

Wen-Hao Qi et al.

Summary: In this paper, a magnetically modulated sliding structure (MMSS) is proposed and studied. The MMSS exhibits high-static low-dynamic stiffness (HSLDS) through the modulation of repulsive magnets. The dynamic model and transmissibility analysis show that the MMSS isolator has excellent low frequency isolation performance. Experimental results also verify the effectiveness of the modulation mechanism and the isolator's ability to effectively isolate vibrations exceeding 4 Hz.

JOURNAL OF SOUND AND VIBRATION (2022)

Article Engineering, Mechanical

A theory for bistable vibration isolators

Bo Yan et al.

Summary: This paper presents a general theory for bistable vibration isolators (BVIs) and reveals the bistable vibration isolation mechanism. The advantages of BVIs in vibration isolation are quantitatively verified through theoretical and numerical calculations, providing guidance for the design, analysis, and optimization of BVIs.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Engineering, Mechanical

Cockroach-inspired structure for low-frequency vibration isolation

Peng Ling et al.

Summary: This paper presents a cockroach-inspired structure for low-frequency vibration isolation. By mimicking the body topology of cockroaches, the structure exhibits nonlinear properties that can significantly reduce resonant frequency and peak transmissibility. It provides a high-stability and cost-effective solution for low-frequency vibration isolation.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Engineering, Mechanical

Sliding-boundary-constrained cantilever structure for vibration isolation via nonlinear stiffness modulation

Jia-Jia Lu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Article Mechanics

Vibration properties of a knee bio-inspired nonlinear isolation structure

Xiuting Sun et al.

Summary: Inspired by the knee joint of birds, a novel vibration isolator is proposed in this paper. By adjusting the structural parameters, the isolation bandwidth and linear/nonlinear coefficients are optimized. The research findings are of great significance for ultralow frequency vibration isolation.

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2022)

Article Engineering, Mechanical

Analysis of a bio-inspired vibration isolator with a compliant limb-like structure

Mu-Qing Niu et al.

Summary: This paper proposes a novel bio-inspired isolator with a compliant limb-like structure. The compliant mechanism is used for both the geometric constrained movement and the storage of elastic energy. A systematic investigation is performed on the high-static-low-dynamic-stiffness characteristic and the vibration isolation performance of the proposed isolator.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Review Engineering, Mechanical

Applications of Nonlinearity in Passive Vibration Control: A Review

P. S. Balaji et al.

Summary: This review discusses the application of nonlinearity in passive vibration control devices, showing how nonlinearity is applied and beneficial in the systems. Nonlinearity has also been successfully applied in energy harvesting devices, nonlinear energy sinks, and metamaterials for vibration isolation and energy harvesting purposes. The implementation of nonlinearity in engineering systems has shown significant benefits over linear systems.

JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES (2021)

Article Mathematics, Applied

Optimizing elastic potential energy via geometric nonlinear stiffness

Gianluca Gatti

Summary: This paper presents a strategy for optimizing a nonlinear elastic mechanical system to increase elastic potential energy compared to a linear counterpart. Theoretical insights and asymptotic trends for optimum parameter selection are provided to aid in design. A prototype device is assembled and tested to demonstrate the theoretical discussions.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2021)

Review Automation & Control Systems

Inerter-like devices used for vibration isolation: A historical perspective

Willian M. Kuhnert et al.

Summary: The paper discusses the inerter as a new mechanical element for vibration isolation, highlighting its advantages in improving high-frequency performance compared to traditional isolation systems. It establishes a connection between old and new ideas, and thoroughly examines the application of the inerter in mechanical systems.

JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS (2021)

Article Engineering, Mechanical

A multi-directional multi-stable device: Modeling, experiment verification and applications

Tao Yang et al.

Summary: The multi-stable vibration energy harvester based on spring-mass system has attracted widespread attention due to its advantages of low natural frequency, simple structure, and high output power. By using a link mechanism to improve the bistable oscillator, a multi-directional multi-stable device has been proposed, which can generate large amplitude response at ultra-low frequencies and enable motion throughout all equilibrium positions. Both theoretical and experimental data support the efficiency of the designed prototype for energy harvesting from ultra-low frequency vibration sources.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Acoustics

Passive control of multiple structural resonances with piezoelectric vibration absorbers

G. Raze et al.

Summary: A novel sequential tuning procedure for passive piezoelectric shunts targeting multiple structural modes is proposed in this work. The control authority on each targeted mode is limited by passivity requirements, highlighting the fundamental limitations of multimodal piezoelectric shunts. The characteristics of the shunt impedance are fully specified based on effective characteristics of the piezoelectric system around resonance, with numerical verification and experimental validation conducted on piezoelectric beams using a digital vibration absorber.

JOURNAL OF SOUND AND VIBRATION (2021)

Article Engineering, Mechanical

A novel dynamic stabilization and vibration isolation structure inspired by the role of avian neck

Xiuting Sun et al.

Summary: This paper proposes a novel multi-layer structure bio-inspired by avian neck for dynamic stabilization and vibration isolation under external excitation. Mechanical modeling and dynamic behavior analysis are used to determine key characteristics and optimize the structural configuration and parameters for effective stabilization and control. The proposed structure shows potential applications in nonlinear isolation structural design and various fields such as mechanical arms and satellite sensors.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Article Engineering, Mechanical

An innovative quasi-zero stiffness isolator with three pairs of oblique springs

Feng Zhao et al.

Summary: This paper introduces an innovative design of quasi-zero stiffness isolator with three pairs of oblique springs, optimizing for lower transmissibility and wider QZS region. The design is validated through static and dynamic analyses, showing improved performance compared to traditional isolators.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Article Acoustics

A novel lever-type vibration isolator with eddy current damping

Bo Yan et al.

Summary: This study proposes a lever-type vibration isolator with eddy current damping, which can broaden the isolation band by adjusting the lever ratio and improve the vibration suppression performance. The effects of lever ratio, tip mass, material properties, geometric parameters, and excitation amplitude on vibration isolation performance are analyzed. ECD can further enhance vibration suppression in the resonance region, while transmissibility tends to stabilize in the isolation region with increasing lever ratio.

JOURNAL OF SOUND AND VIBRATION (2021)

Article Acoustics

A ring vibration isolator enhanced by a nonlinear energy sink

Dong-Dong Tan et al.

Summary: This paper discusses the use of a nonlinear energy sink to reduce vibration in a broad frequency range, aiming to design a lightweight broadband isolator. By establishing a comprehensive model of a ring with the nonlinear energy sink, the study reveals the superiority of the nonlinear energy sink in a ring isolator compared to a conventional linear absorber of the same mass, damping, and stiffness. The effects of mass, nonlinear stiffness, and damping ratio on vibration reduction are examined through mathematical modeling and analysis techniques.

JOURNAL OF SOUND AND VIBRATION (2021)

Article Engineering, Civil

Nonlinear dynamic response of a wire rope isolator: Experiment, identification and validation

Andrea Salvatore et al.

Summary: The experimental and numerical investigation on the vibration isolation capability of a nonlinear wire rope spring shows that the device exhibits distinct nonsymmetrical behavior under compression and tension, leading to a significant reduction in transmissibility coefficient across a broad frequency range. The proposed phenomenological model accurately predicts the nonlinear dynamic response and is in good agreement with experimental results.

ENGINEERING STRUCTURES (2021)

Review Engineering, Civil

Inerter-based structural vibration control: A state-of-the-art review

Ruisheng Ma et al.

Summary: This paper provides a state-of-the-art review on the research and development of inerter-based passive vibration control systems, focusing on the concept, mechanical models, and applications of inerter in civil engineering. Noteworthy, inerter offers many advantages compared to conventional vibration control systems.

ENGINEERING STRUCTURES (2021)

Article Acoustics

A self-tuning adaptive-passive lever-type vibration isolation system

Onur Ozyar et al.

Summary: This study describes a novel self-tuning adaptive-passive lever-type vibration isolation system for base excitations. The system adjusts the lever ratio to match the antiresonance frequency with the excitation frequency to suppress output vibration.

JOURNAL OF SOUND AND VIBRATION (2021)

Article Engineering, Mechanical

A novel nonlinear mechanical oscillator and its application in vibration isolation and energy harvesting

Tao Yang et al.

Summary: This study introduces the theory and method of vibration isolation and energy harvesting based on the high-order quasi-zero stiffness (HQZS) mechanism. Research results indicate that the HQZS oscillator shows better performance for ultra-low stochastic excitation intensity or harmonic excitation.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Engineering, Mechanical

Nonlinear vibration isolation via a circular ring

Ze-Qi Lu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Mathematics, Applied

Statics and dynamics of a nonlinear oscillator with quasi-zero stiffness behaviour for large deflections

Gianluca Gatti

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2020)

Article Engineering, Multidisciplinary

Bio-inspired polygonal skeleton structure for vibration isolation: Design, modelling, and experiment

Ge Yan et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2020)

Article Acoustics

Design of a quasi-zero stiffness isolation system for supporting different loads

Kan Ye et al.

JOURNAL OF SOUND AND VIBRATION (2020)

Article Engineering, Mechanical

A novel bio-inspired multi-joint anti-vibration structure and its nonlinear HSLDS properties

Guoqing Jiang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Engineering, Mechanical

An improved quasi-zero stiffness vibration isolation system utilizing dry friction damping

Ata Donmez et al.

NONLINEAR DYNAMICS (2020)

Article Engineering, Mechanical

Bio-inspired anti-impact manipulator for capturing non-cooperative spacecraft: theory and experiment

Honghua Dai et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Engineering, Mechanical

A bio-inspired isolator based on characteristics of quasi-zero stiffness and bird multi-layer neck

Tianchang Deng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Engineering, Mechanical

Superior nonlinear passive damping characteristics of the bio-inspired limb-like or X-shaped structure

Jing Bian et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Article Engineering, Mechanical

Subharmonics and ultra-subharmonics of a bio-inspired nonlinear isolation system

Yu Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Article Engineering, Mechanical

A novel bio-inspired anti-vibration structure for operating hand-held jackhammers

Xingjian Ling et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Article Instruments & Instrumentation

A K-shaped spring configuration to boost elastic potential energy

Gianluca Gatti

SMART MATERIALS AND STRUCTURES (2019)

Article Acoustics

The V-shaped band-stop vibration isolator inspired by middle ear

Gi Woo Kim et al.

APPLIED ACOUSTICS (2019)

Review Mechanics

Recent Advances in Shock Vibration Isolation: An Overview and Future Possibilities

Diego Francisco Ledezma-Ramirez et al.

APPLIED MECHANICS REVIEWS (2019)

Article Automation & Control Systems

Nonlinear Electromagnetic Shunt Damping for Nonlinear Vibration Isolators

Bo Yan et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2019)

Article Engineering, Mechanical

A 6-DOF passive vibration isolator based on Stewart structure with X-shaped legs

Feizhou Hu et al.

NONLINEAR DYNAMICS (2018)

Article Engineering, Mechanical

Accurate modeling and analysis of a bio-inspired isolation system: with application to on-orbit capture

Honghua Dai et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Article Engineering, Mechanical

Post-capture vibration suppression of spacecraft via a bio-inspired isolation system

Honghua Dai et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Article Engineering, Mechanical

A novel isolation structure with flexible joints for impact and ultralow-frequency excitations

Xiuting Sun et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Article Engineering, Mechanical

A vari-stiffness nonlinear isolator with magnetic effects: Theoretical modeling and experimental verification

Bo Yan et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Article Engineering, Mechanical

Force transmissibility of a two-stage vibration isolation system with quasi-zero stiffness

Xinlong Wang et al.

NONLINEAR DYNAMICS (2017)

Article Engineering, Mechanical

Low frequency vibration isolator with adjustable configurative parameter

Thanh Danh Le et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

Article Acoustics

A torsion quasi-zero stiffness vibration isolator

Jiaxi Zhou et al.

JOURNAL OF SOUND AND VIBRATION (2015)

Review Engineering, Mechanical

Recent advances in micro-vibration isolation

Chunchuan Liu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2015)

Article Engineering, Mechanical

Multi-direction vibration isolation with quasi-zero stiffness by employing geometrical nonlinearity

Xiuting Sun et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2015)

Article Engineering, Multidisciplinary

Vibration isolation by exploring bio-inspired structural nonlinearity

Zhijing Wu et al.

BIOINSPIRATION & BIOMIMETICS (2015)

Article Engineering, Mechanical

Experimental investigation of a vibration isolation system using negative stiffness structure

Thanh Danh Le et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)

Article Acoustics

On the force transmissibility of a vibration isolator with quasi-zero-stiffness

A. Carrella et al.

JOURNAL OF SOUND AND VIBRATION (2009)

Review Acoustics

Recent advances in nonlinear passive vibration isolators

R. A. Ibrahim

JOURNAL OF SOUND AND VIBRATION (2008)

Article Acoustics

A study of a nonlinear vibration isolator with a quasi-zero stiffness characteristic

Ivana Kovacic et al.

JOURNAL OF SOUND AND VIBRATION (2008)