4.6 Article

Investigation of the physicochemical properties of Bi,Ca-doped BaZrO3 perovskites

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Pr0.7Ba0.3Co0.8-xFe0.2NixO3-δ perovskite: High activity and durable cathode for intermediate-to-low-temperature proton-conducting solid oxide fuel cells

Wanfeng Zhu et al.

Summary: The development of triple-conductivity durable cathode with effective oxygen reduction reaction (ORR) activity is significant for proton-conducting solid oxide fuel cell (H-SOFC) at intermediate-to-low-temperature. In this study, a Pr0.7Ba0.3Co0.8-xFe0.2NixO3-delta (x = 0, 0.1, 0.2, 0.3) cathode material with triple-conductivity was developed. Nickel doping was found to enhance the surface exchange kinetics and boost bulk charge transfer, resulting in better ORR activity and durability for H-SOFC.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

Article Chemistry, Physical

BiOCl: Dy3+/Ba2+nanophosphors: Synthesis, luminescence characteristics and applications in latent fingerprint detection and cheiloscopy

Ansu Sara Solomon et al.

Summary: In this research, Ba2+ co-doped BiOCl:Dy3+ nanophosphors were synthesized using a cost-effective solid-state reaction method. The study investigated the effect of Barium concentration on the structural and luminescent properties of the phosphors. The results showed that Ba2+ co-doping significantly enhanced the emission intensity, making it a potential material for color displays and forensic applications.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2023)

Article Energy & Fuels

Surface regulating of copper-iron nanoparticles bimetallic exsolution for enhanced performance and durability of double perovskite anode in solid oxide fuel cells

Yujie Wu et al.

Summary: The metallic exsolved ceramic anode for Solid oxide fuel cells (SOFCs) has been widely studied for its active sites and high catalytic efficacy. However, the performance and durability of nanoparticle decorated ceramic anodes are still hindered by the morphology and size of exsolved nanoparticles, and there are few studies on the specific dissolution rules and conditions. This study doped Cu element into high-performance Sr1.9Fe1.5Mo0.5O6-δ materials to investigate the exsolution law of nanoparticles and the change of nanomorphology in the reduced state. The results showed that SFMC0.1, used as an anode for solid oxide fuel cells, can evolve into high-performance composite phases composed of perovskite, Ruddlesden-Popper phase, and copper-iron bimetallic nanoparticles under specific conditions. The reduction treatment containing water vapor can control the morphology of Fe nanoparticles and the doping of Cu can inhibit the agglomeration of nanoparticles.
Review Materials Science, Multidisciplinary

Recent progress of perovskite-based electrolyte materials for solid oxide fuel cells and performance optimizing strategies for energy storage applications

Muhammad Bilal Hanif et al.

Summary: This review summarizes recent developments and prospects of perovskite electrolyte materials in solid oxide fuel cells, emphasizing various design strategies and challenges.

MATERIALS RESEARCH BULLETIN (2022)

Article Materials Science, Ceramics

Effect of engineered lattice contraction and expansion on the performance and CO2 tolerance of Ba0.5Sr0.5Co0.7Fe0.3O3-? functional material for intermediate temperature solid oxide fuel cells

Idris Temitope Bello et al.

Summary: This study investigates the effects of lattice contraction and expansion on the performance and CO2 tolerance of Ba0.5Sr0.5Co0.7Fe0.3O3-delta (BSCF) air electrode material. Strategic substitution of Fe-B-site cations with transition metals achieves lattice contraction and expansion. The lattice-contracted BSCFC5 cathode exhibits the best performance and enhanced CO2 tolerance.

CERAMICS INTERNATIONAL (2022)

Article Materials Science, Ceramics

Variation of citrate to metal cation ratio for dense and phase pure BaZrO3 via autocombustion synthesis

P. Manju et al.

Summary: This study demonstrates the formation of the metal-citrate complex structure in the gel, which reflects the true stoichiometry of the redox mixtures, leading to the production of highly dense BaZrO3 ceramic. By varying the citric acid to metal cation ratio, the optimal synthesis parameters were found to correspond to a C/M ratio of 1.5.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Review Chemistry, Physical

Recent Advances in Perovskite Catalysts for Efficient Overall Water Splitting

Conghui Si et al.

Summary: Water splitting is an environmentally friendly and effective method for producing high-purity hydrogen, and perovskite oxides have emerged as promising electrocatalysts for this process. This review summarizes the research progress in the design, development, and application of perovskite oxides for electrocatalytic water splitting, emphasizing innovative synthesis strategies and a deeper understanding of structure-activity relationships. The challenges and prospects for further development are also discussed.

CATALYSTS (2022)

Article Chemistry, Physical

Perovskite-Based Electrocatalysts for Cost-Effective Ultrahigh-Current-Density Water Splitting in Anion Exchange Membrane Electrolyzer Cell

Jiayi Tang et al.

Summary: This study demonstrates that versatile perovskite-based oxides can be developed into low-cost, highly active, and durable electrocatalysts for high current density water splitting, which is of great importance for large-scale hydrogen production.

SMALL METHODS (2022)

Review Chemistry, Multidisciplinary

Solar H2 production systems: current status and prospective applications

Noemi Pirrone et al.

Summary: This article critically outlines the recent developments in solar-driven water splitting for hydrogen production. It describes the three fundamental types of devices (photocatalytic, photoelectrochemical, and photovoltaic-electrolyzer) in terms of working principles and highlights the progress in materials optimization and device engineering, emphasizing the limitations of large-scale application. The article also considers the feasibility of sun-driven hydrogen production from an economic perspective and explores the potential integration of this technology in the world energy supply scenario.

GREEN CHEMISTRY (2022)

Review Energy & Fuels

Progress in proton-conducting oxides as electrolytes for low-temperature solid oxide fuel cells: From materials to devices

Wei Zhang et al.

Summary: Solid oxide fuel cells operating at low temperatures (300-600 degrees C) have advantages for stationary and mobile electricity production, with proton-conducting oxides playing a critical role. Progress in proton-conducting solid oxide electrolytes for low-temperature SOFCs has been summarized, focusing on strategies to tune the structures and properties of proton-conducting oxides, techniques for improving performance of protonic ceramic-based SOFCs, and challenges and opportunities in the development of proton-conducting electrolyte-based PCFCs.

ENERGY SCIENCE & ENGINEERING (2021)

Article Biochemistry & Molecular Biology

Revisiting the BaBiO3 semiconductor photocatalyst: synthesis, characterization, electronic structure, and photocatalytic activity

Dmitry S. Shtarev et al.

Summary: This study explores the electronic, optoelectronic, and photocatalytic properties of BaBiO3 synthesized by a solid-state route. New electronic structural data and photocatalytic experiments shed light on mechanistic details previously unaddressed, providing insights into the band structure of BaBiO3 and demonstrating its superior photocatalytic activity compared to Evonik P25 TiO2 under similar experimental conditions.

PHOTOCHEMICAL & PHOTOBIOLOGICAL SCIENCES (2021)

Article Chemistry, Physical

Solid oxide proton conductors beyond perovskites

Sacha Fop

Summary: Solid oxide proton conductors are crucial materials for hydrogen-based energy technologies, with various structure types including perovskite and derivatives. Recent reports show that these materials exhibit high ionic conductivity, offering potential for innovative discoveries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Engineering, Environmental

Oxygen vacancy induced performance enhancement of toluene catalytic oxidation using LaFeO3 perovskite oxides

Mudi Wu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Physical

Facile assembly of Ag nanoparticles on H2SrTa2O7 nanosheets with improved catalytic property

Yi Ren et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Review Chemistry, Analytical

Review on Sensing Applications of Perovskite Nanomaterials

Muthaiah Shellaiah et al.

CHEMOSENSORS (2020)

Article Multidisciplinary Sciences

Catalytic performance of the Ce-doped LaCoO3 perovskite nanoparticles

Anees A. Ansari et al.

SCIENTIFIC REPORTS (2020)

Review Chemistry, Multidisciplinary

The role of oxygen vacancies of ABO3 perovskite oxides in the oxygen reduction reaction

Qianqian Ji et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Engineering, Electrical & Electronic

Microstructures and electrical properties of Mn/Co/Ni-doped BaBiO3 perovskite-type NTC ceramic systems

Jing-Jing Qu et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Review Materials Science, Multidisciplinary

The electrolyte materials for SOFCs of low-intermediate temperature: review

Fangfang Wang et al.

MATERIALS SCIENCE AND TECHNOLOGY (2019)

Review Chemistry, Multidisciplinary

Carbon-based materials for stable, cheaper and large-scale processable perovskite solar cells

Lucia Fagiolari et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Engineering, Electrical & Electronic

Photoluminescence, surface photovoltage and photocatalytic properties of BaBiO3 powders

Baoquan Men et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Materials Science, Multidisciplinary

BaBiO3: A potential absorber for all-oxide photovoltaics

Arun Singh Chouhan et al.

MATERIALS LETTERS (2018)

Article Chemistry, Physical

Bandgap Engineering of Barium Bismuth Niobate Double Perovskite for Photoelectrochemical Water Oxidation

Baicheng Weng et al.

ADVANCED ENERGY MATERIALS (2017)

Review Materials Science, Ceramics

Review of perovskite ceramic synthesis and membrane preparation methods

Daniel D. Athayde et al.

CERAMICS INTERNATIONAL (2016)

Review Materials Science, Multidisciplinary

Advanced materials for SOFC application: Strategies for the development of highly conductive and stable solid oxide proton electrolytes

D. A. Medvedev et al.

PROGRESS IN MATERIALS SCIENCE (2016)

Article Multidisciplinary Sciences

Water electrolysis on La1-xSrxCoO3-δ perovskite electrocatalysts

J. Tyler Mefford et al.

NATURE COMMUNICATIONS (2016)

Article Physics, Applied

Synthesis and electrical properties of BaBiO3 and high resistivity BaTiO3-BaBiO3 ceramics

Nitish Kumar et al.

JOURNAL OF ADVANCED DIELECTRICS (2016)

Article Electrochemistry

Polymer electrolytes and perovskites: lights and shadows in photovoltaic devices

Federico Bella

ELECTROCHIMICA ACTA (2015)

Article Materials Science, Ceramics

Properties of yttrium-doped barium zirconate ceramics synthesized by the oxidant-peroxo method

M. D. Goncalves et al.

CERAMICS INTERNATIONAL (2014)

Review Materials Science, Multidisciplinary

Synthesis strategies for improving the performance of doped-BaZrO3 materials in solid oxide fuel cell applications

Lei Bi et al.

JOURNAL OF MATERIALS RESEARCH (2014)

Article Physics, Condensed Matter

Specific Features of Preparation of Dense Ceramic Based on Barium Zirconate

Yu G. Lyagaeva et al.

SEMICONDUCTORS (2014)

Article Chemistry, Physical

Highly effective perovskite-type BaZrO3 supported Ru catalyst for ammonia synthesis

Ziqing Wang et al.

APPLIED CATALYSIS A-GENERAL (2013)

Article Electrochemistry

Structure and electrical conductivity of BaCe0.85Ln0.15O3-δ (Ln = Gd, Y, Yb) ceramics

Yi-Jing Gu et al.

ELECTROCHIMICA ACTA (2013)

Article Geochemistry & Geophysics

Specific surface area and pore-size distribution in clays and shales

Utpalendu Kuila et al.

GEOPHYSICAL PROSPECTING (2013)

Article Materials Science, Ceramics

Structural refinement, optical and microwave dielectric properties of BaZrO3

S. Parida et al.

CERAMICS INTERNATIONAL (2012)

Article Chemistry, Multidisciplinary

Physical and Chemical Investigation of Substrate Temperature Dependence of Zirconium Oxide Films on Si(100)

BULLETIN OF THE KOREAN CHEMICAL SOCIETY (2010)

Review Chemistry, Physical

Materials for Solid Oxide Fuel Cells

Allan J. Jacobson

CHEMISTRY OF MATERIALS (2010)

Review Materials Science, Multidisciplinary

Materials and manufacturing technologies for solid oxide fuel cells

Norbert H. Menzler et al.

JOURNAL OF MATERIALS SCIENCE (2010)

Article Chemistry, Physical

High Total Proton Conductivity in Large-Grained Yttrium-Doped Barium Zirconate

Yoshihiro Yamazaki et al.

CHEMISTRY OF MATERIALS (2009)

Article Materials Science, Ceramics

Citrate-nitrate auto-combustion synthesis of perovskite-type nanopowders: A systematic approach

F. Deganello et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)

Review Chemistry, Analytical

Perovskite oxides for semiconductor-based gas sensors

Jeffrey W. Fergus

SENSORS AND ACTUATORS B-CHEMICAL (2007)

Article Materials Science, Ceramics

Preparation of BaZrO3 nanopowders by spray pyrolysis method

Miroslaw M. Bucko et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)

Article Materials Science, Multidisciplinary

Synthesis and properties of La0.7Sr0.3MnO3 cathode by gel combustion

RS Guo et al.

MATERIALS LETTERS (2006)

Article Chemistry, Analytical

Perovskite-type BaSnO3 powders for high temperature gas sensor applications

J Cerdà et al.

SENSORS AND ACTUATORS B-CHEMICAL (2002)