☆ 4.6 Article

Carbon foam-reinforced polyimide aerogel composites for thermal insulation with reduced shrinkage

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Melamine-Crosslinked Polyimide Aerogels from Supercritical Ethanol Drying with Improved In-Use Shape Stability Against Shrinking

Weiwang Chen et al.

Summary: In this study, the shape stability of melamine-crosslinked polyimide (MPI) aerogels at high temperatures is greatly improved through supercritical drying with ethanol. The resultant aerogels exhibit excellent thermal insulation, mechanical strength, and thermal stability, making them promising for diverse applications.

MACROMOLECULAR MATERIALS AND ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Recent advances in tailoring and improving the properties of polyimide aerogels and their application

Shahriar Ghaffari-Mosanenzadeh et al.

Summary: Aerogels are known for their ultra-lightweight and high porosity, but due to their hygroscopic nature and brittleness, they are not commonly used in commercial applications. To enhance their mechanical and hydrophobic properties, various reinforcement materials are added to the surface.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermal and Waterproof Properties of Foamed Concrete with Nano SiO2 Aerogel and Organosilicon Waterproofing Agent

Baojun Cheng et al.

Summary: This study aimed to enhance the thermal and waterproof properties of foamed concrete through the synergistic effect of nano SiO2 aerogel powder and organosilicon waterproofing agent. The results showed that the organosilicon waterproofing agent reduced the dry bulk density, compressive strength, water absorption rate, and thermal conductivity of foamed concrete. Furthermore, the addition of nano SiO2 aerogel powder further decreased the water absorption rate and thermal conductivity, while increasing the average pore size and the amount of macropore, and weakening the interfacial adhesion between hydration products.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent progress on polyimide aerogels against shrinkage: a review

Weiwang Chen et al.

Summary: Polyimide aerogels hold great promise for various applications due to their nanoporous structure and excellent performance in thermal insulation and dielectric protection. However, the significant shrinkage they typically experience poses a major challenge for their shape-stable preparation and reliable use. Understanding the factors influencing the shrinkage of PI aerogels and finding effective strategies to reduce it is crucial. This review focuses on providing guidance for preparing PI aerogels with significantly reduced shrinkage, thereby improving their shape stability and reliability. Further research on shrinkage reduction in PI aerogels deserves continuous attention.

JOURNAL OF MATERIALS SCIENCE (2022)

添加到收藏夹

Article Polymer Science

SiCwhiskers-reinforced polyimide aerogel composites with robust compressive properties and efficient thermal insulation performance

Xianbo Hou et al.

Summary: Novel PI aerogel composites prepared by introducing Silicon carbide whiskers (SiCw) exhibit high compressive performance and enhanced high temperature stability, making them suitable for aerospace applications.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lightweight, Superelastic, and Hydrophobic Polyimide Nanofiber /MXene Composite Aerogel for Wearable Piezoresistive Sensor and Oil/Water Separation Applications

Hu Liu et al.

Summary: The article describes a conductive polyimide nanofiber/MXene composite aerogel with features such as ultralow density, temperature tolerance, superior compressibility, and fatigue resistance, suitable for applications in piezoresistive sensors and oil/water separation.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Applied

Influence of diamine rigidity and dianhydride rigidity on the microstructure, thermal and mechanical properties of cross-linked polyimide aerogels

Shuang Xi et al.

Summary: Polyimide aerogels (PAs) prepared with different monomers and cross-linked with a low-cost aminosilane show that the rigidity of diamine and dianhydride has a significant impact on the microstructure, thermal and mechanical properties of PAs. Increasing rigidity of diamine or dianhydride leads to higher Young's modulus and yield strength. PAs synthesized with more flexible diamines tend to have a more disordered microstructure and lower thermal conductivity.

JOURNAL OF POROUS MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Mechanically strong polyimide aerogels cross-linked with dopamine-functionalized carbon nanotubes for oil absorption

Dongliang Zhang et al.

Summary: A novel procedure was developed to fabricate high-mechanical-strength polyimide aerogels cross-linked with dopamine-functionalized carbon nanotubes, exhibiting superior mechanical properties, high thermal stability, and flame retardant performance. The aerogels also possess superhydrophobic and oleophilic properties on the surface.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Materials Science, Ceramics

Properties improvement of linear polyimide aerogels via formation of doubly cross-linked polyimide-polyvinylpolymethylsiloxane network structure

Ze Zhang et al.

Summary: The properties of linear polyimide aerogels were enhanced by introducing the network structure of polyvinylpolymethylsiloxane, resulting in doubly cross-linked polyimide-PVPMS structure with resilience and fire-retardant properties. The introduced PVPMS network structure weakened the effect of PI rigidity on LPAs, and played a significant role in the physical properties of PPCAs, allowing for the use of lower cost monomers in large-scale production.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2021)

添加到收藏夹

Article Chemistry, Applied

Polyimide aerogels using melamine as an economical yet effective crosslinker

Sha Liu et al.

Summary: MPI aerogels crosslinked with economical melamine exhibit low shrinkage, ultralight bulk densities, low thermal conductivity, thermal stability, and acceptable compressive strength, with morphology and properties that can be tailored. These aerogels have a broad prospect in various fields, including thermal insulation.

JOURNAL OF POROUS MATERIALS (2021)

添加到收藏夹

Article Engineering, Environmental

Super-flexible polyimide nanofiber cross-linked polyimide aerogel membranes for high efficient flexible thermal protection

Xianbo Hou et al.

Summary: The study developed a polyimide (PI) nanofiber cross-linked polyimide aerogel membrane with high flexibility, strong mechanical properties, and efficient heat insulation. Addition of nanofibers significantly enhanced the performance of aerogel, making it a potential material for applications in modern technology, military, and aerospace.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Flexible, fatigue resistant, and heat-insulated nanofiber-assembled polyimide aerogels with multifunctionality

Xianbo Hou et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Facile Fabrication of Mechanically Strong and Thermal Resistant Polyimide Aerogels with an Excess of Cross-Linker

Yu Lin et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Ceramics

Improved heat insulation and mechanical properties of silica aerogel/glass fiber composite by impregnating silica gel

Sameera Shafi et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fiber Reinforced Polyimide Aerogel Composites with High Mechanical Strength for High Temperature Insulation

Zhaoxian Zhu et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Physical

High-mechanical-strength polyimide aerogels crosslinked with 4, 4′-oxydianiline-functionalized carbon nanotubes

Zhaoxian Zhu et al.

CARBON (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Resilient, fire-retardant and mechanically strong polyimide-polyvinylpolymethylsiloxane composite aerogel prepared via stepwise chemical liquid deposition

Ze Zhang et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultralight and Low Thermal Conductivity Polyimide-Polyhedral Oligomeric Silsesquioxanes Aerogels

Yi-wei Wu et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2018)

添加到收藏夹

Review Chemistry, Physical

Current status, opportunities and challenges in catalytic and photocatalytic applications of aerogels: Environmental protection aspects

Hajar Maleki et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

添加到收藏夹

Article Chemistry, Physical

Superelastic and ultralight polyimide aerogels as thermal insulators and particulate air filters

Zhenchao Qian et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Materials Science, Ceramics

Co-polyimide aerogel using aromatic monomers and aliphatic monomers as mixing diamines

Boya Li et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Chemistry, Applied

Hydroxypropyl methylcellulose based aerogels: Synthesis, characterization and application as adsorbents for wastewater pollutants

Bianca F. Martins et al.

CARBOHYDRATE POLYMERS (2017)

添加到收藏夹

Article Chemistry, Physical

Use of cellulose-based carbon aerogels as catalyst support for PEM fuel cell electrodes: Electrochemical characterization

Elodie Guilminot et al.

JOURNAL OF POWER SOURCES (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.