☆ 4.5 Review

Preparation and properties of composite coatings, based on carbon nanotubes, for medical applications

CARBON LETTERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Multidisciplinary

Properties, assembly and characterization of carbon nanotubes: their application in water purification, environmental pollution control and biomedicines-a comprehensive review

Faiza Asghar et al.

Summary: Carbon nanotubes (CNTs) have attracted researchers' attention due to their simplicity and ease of synthesis. They possess new features such as large surface area, stiffness, and durability, opening up new opportunities for environmental improvement and application in various fields. This review paper presents different applications of CNTs, including water treatment, drug delivery, and artificial implants, and covers their purification methods and applications in different disciplines.

CARBON LETTERS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influences of surface topography of porous titanium scaffolds manufactured by powder bed fusion on osteogenesis

Yongkyung Lee et al.

Summary: Powder bed fusion (PBF) is a useful metal-3D printing technology for manufacturing porous medical implants. The bone ingrowth characteristics of porous structures are affected by 3D printing parameters and the topography of 3D-printed metal surfaces, but it is still unclear how the surface topography changes and how pore shape impacts bone ingrowth efficiency.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Plasma-Etched Vertically Aligned CNTs with Enhanced Antibacterial Power

Emily Schifano et al.

Summary: The emergence of multidrug-resistant bacteria is a growing threat to public health, necessitating the development of non-antibiotic antibacterial approaches. In this study, vertically aligned carbon nanotubes (VA-CNTs) with controlled nanomorphology were proposed as effective platforms for bacteria eradication. Through a combination of microscopic and spectroscopic techniques, the topography of VA-CNTs was tailored in a controlled and time-efficient manner using plasma etching processes. The highest reduction in cell viability was observed for VA-CNTs modified using plasma etching with Ar and O-2, indicating their potential as a surface for inactivating both planktonic and biofilm infections.

NANOMATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

Efficient oil-water separation by a robust superhydrophobic coating prepared directly from commercial lacquer using silanized multi-walled carbon nanotubes as filler

Xiannan Zhang et al.

Summary: In this study, a superhydrophobic and superoleophilic MWCNTs@MTMS composite was prepared by silanizing multi-walled carbon nanotubes with abundant hydroxyl groups using trimethoxymethylsiane as the silica precursor. The composite showed excellent mechanical robustness and could be easily sprayed on various substrates with the addition of commercial lacquer. The coated surfaces exhibited high water resistance and the composite was able to efficiently separate oil-water mixtures.

APPLIED SURFACE SCIENCE (2023)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effect of controlled surface roughness and biomimetic coating on titanium implants adhesion to the bone: An experiment animal study

Mohamed Ahmed Alkhodary

Summary: This study evaluated the effect of laser micro-grooving and laser micro-grooving combined with RGD coating on the strength of the dental implants/bone interface. The results showed that the laser-grooved/RGD coated rods had significantly higher pull-out strength than the laser-grooved and control rods. Laser micro-grooving improved peri-implant bone healing, whereas RGD coating facilitated earlier bone-implant adhesion and better mineralization.

SAUDI DENTAL JOURNAL (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis, antibacterial activity and action mechanism of silver-based nanomaterials with thermosensitive polymer-decorated graphene oxide as a stable support

Shuying Liu et al.

Summary: Silver nanoparticles (AgNPs) were formed on graphene oxide (GO) decorated with a temperature-sensitive copolymer, which showed excellent broad-spectrum antibacterial activity against Gram-positive and Gram-negative bacteria. The antibacterial efficiency of the nanocomposite was dependent on temperature, concentration of nanomaterials, and species of tested bacteria.

MATERIALS TODAY COMMUNICATIONS (2023)

添加到收藏夹

Article Materials Science, Ceramics

Carbon nanotube reinforced pyrocarbon matrix composites with high coefficient of thermal expansion for self-adapting ultra-high-temperature ceramic coatings

Ningkun Liu et al.

Summary: By preparing carbon nanotube reinforced pyrocarbon (Ct/C) nanocomposites with high CTEs, the mismatch in the coefficients of thermal expansion (CTE) with thermal barrier coatings (TBCs) can be reduced, improving the durability of the composites in high-temperature environments.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Chemistry, Physical

Plasma electrolytic oxidation of cold spray kinetically metallized CNT-Al coating on AZ91-Mg alloy: Evaluation of mechanical and surficial characteristics

Yingpeng Zhang et al.

Summary: The plasma electrolytic oxidation (PEO) treatment significantly improves the hardness, elastic modulus, and wear resistance of the carbon nanotube-aluminum (CNT-Al) coatings, making them more effective for applications on AZ91 Mg alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Review Chemistry, Analytical

Carbon nanotubes-based anode materials for potassium ion batteries: A review

Nadeem Khan et al.

Summary: Potassium ion batteries are attractive candidates for large-grid electrochemical energy storage systems due to their substantial reserves and low cost. However, the large ionic size of potassium ions leads to challenges in designing anode materials with fast ion reaction kinetics and stable solid electrolyte interfaces. Carbon nanotubes have shown promise as anode materials for potassium ion batteries due to their unique structural and electrical properties. Various synthesis methods for carbon nanotube-based anodes have been studied, with recent focus on developing nanoarchitectures to enhance their capacity and lifetime.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

添加到收藏夹

Article Materials Science, Biomaterials

Silver-substituted hydroxyapatite inhibits Pseudomonas aeruginosa outer membrane protein F: A potential antibacterial mechanism

Yun Zhao et al.

Summary: This study incorporated silver ions into hydroxyapatite to enhance its antibacterial activity and investigated its mechanism of action against Pseudomonas aeruginosa. The results showed that silver ions can significantly damage bacterial cells and inhibit the expression of outer membrane proteins. Therefore, incorporating silver ions with hydroxyapatite could effectively prevent bone graft infection.

BIOMATERIALS ADVANCES (2022)

添加到收藏夹

Review Pharmacology & Pharmacy

Bioactive coatings with anti-osteoclast therapeutic agents for bone implants: Enhanced compliance and prolonged implant life

Dragana Bjelic et al.

Summary: The use of therapeutic agents that inhibit bone resorption is important for the longevity of implants, revision surgeries, and the healthcare system. This review focuses on incorporating osteoclast inhibitors into bioactive coatings for bone implants and discusses the challenges of systemic treatment. It also explores the suitable concentrations, release times, and effects of the antiresorptive agents on nearby cells or bone tissue. However, further research is needed to optimize implant design and personalize the coating material and antiresorptive agent selection.

PHARMACOLOGICAL RESEARCH (2022)

添加到收藏夹

Article Chemistry, Applied

Synergistic effect of carbon nanotubes bonded graphene oxide to enhance the flame retardant performance of waterborne intumescent epoxy coatings

Chunlin Chen et al.

Summary: The study investigates the synergistic effect of carbon nanotubes (CNTs) and graphene oxide (GO) on flame retardant properties in waterborne intumescent epoxy coatings. By wrapping bio-inspired polydopamine (PDA) on CNTs and grafting 3-Aminopropyl triethoxysilane (KH550) on CNTs/PDA surface, and then combining GO with modified CNTs to obtain GO@M-CNTs hybrids, the composite coating with GO@M-CNTs hybrids exhibited better fire retardant performance compared to CNTs or GO nanosheets alone.

PROGRESS IN ORGANIC COATINGS (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Introducing cyano-functionalized multiwalled carbon nanotubes to improve corrosion resistance and mechanical performance of poly(arylene ether nitrile) coating

Yunqing Xia et al.

Summary: This study introduces poly(arylene ether nitrile) (PEN) as a protective coating on metallic substrates for the first time, and incorporates cyano-functionalized multiwalled carbon nanotubes (MWCNTs-CN) to enhance corrosion resistance and mechanical performance. The electrochemical results demonstrate outstanding corrosion resistance and improved tensile strength of the MWCNTs-CN/PEN coating. This work provides a novel insight in high-performance protective coating.

SURFACE & COATINGS TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

An abrasion-resistant, photothermal, superhydrophobic anti-icing coating prepared by polysiloxane-modified carbon nanotubes and fluorine-silicone resin

Yang Liu et al.

Summary: Hydrophobic modification of carbon nanotubes was achieved using PMTFPS, resulting in the successful preparation of a superhydrophobic anti-icing coating with photothermal effect by using fluorine-silicone resin as a binder and creating a micro-nano structure with hydrophobic carbon nanotubes. The coating exhibited excellent hydrophobic properties, prolonging freezing time and reducing ice adhesion strength.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Recent progress in the three-dimensional structure of graphene-carbon nanotubes hybrid and their supercapacitor and high-performance battery applications

Muhammad Razlan Zakaria et al.

Summary: The hybridization of graphene and carbon nanotubes to form three-dimensional structures has attracted significant interest due to its prevention of re-stacking and aggregation, maximization of synergistic effect, and excellent functional performance. This review discusses the methods and applications of graphene-CNT hybrid materials.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Review Chemistry, Inorganic & Nuclear

Surface functionalization of carbon nanotubes via plasma discharge: A review

Hamideh Hosseini et al.

Summary: The use of carbon nanotubes in various fields has attracted significant attention due to their unique structures and properties. The introduction of functional groups on the surface of carbon nanotubes can overcome issues such as insolubility.

INORGANIC CHEMISTRY COMMUNICATIONS (2022)

添加到收藏夹

Article Thermodynamics

Layer-by-layer self-assembled functional coatings of carbon nanotube-polyethylenimine for enhanced heat transfer of heat sinks

Jaemin Lee et al.

Summary: Multi-functional porous coatings can enhance the overall heat transfer performance of heat sinks, but the fabrication process is complex and time-consuming. In this study, tunable and scalable carbon nanotube-polyethyleneimine coatings were prepared on aluminum heat sinks using a layer-by-layer self-assembly method, which further improved the heat transfer performance.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of techniques for the application of bioactive coatings on metal-based implants to achieve controlled release of active ingredients

Katja Andrina Kravanja et al.

Summary: Bioactive coatings on metallic implants can improve their biological activity and corrosion resistance by locally releasing active ingredients to promote bone growth. The choice of coating method is crucial for ensuring the biocompatibility and mechanical properties of the implant-coating system.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Chemistry, Applied

A fabrication of CNTs/TiO2/polyurethane films toward antibacterial and protective coatings

Quan Xuan Nguyen et al.

Summary: Steel surfaces are prone to corrosion, especially in natural environments with salt solutions and continuous UV exposure. Researchers have developed a polyurethane coating with TiO2 and carbon nanotubes composites to enhance its protective properties. The coated CT3 steel substrates show excellent antibacterial ability against Staphylococcus aureus bacteria and effective protection against corrosion for up to 31 days under harsh environments.

PROGRESS IN ORGANIC COATINGS (2022)

添加到收藏夹

Article Chemistry, Applied

Smart self-healing coating based on the highly dispersed silica/carbon nanotube nanomaterial for corrosion protection of steel

Dashuai Yan et al.

Summary: This study developed a highly dispersed silica/carbon nanotube (HAC) nanomaterial, effectively solving the agglomeration problem of carbon nanotube-based materials. The HAC nanomaterials were proven to achieve the loading and release of corrosion inhibitors through XPS, TG, and UV-vis spectroscopy. Based on these findings, a smart self-healing coating system (HACB/EP) was developed to enhance the corrosion resistance of coatings.

PROGRESS IN ORGANIC COATINGS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Counter electrode materials based on carbon nanotubes for dye-sensitized solar cells

Nadia Shahzad et al.

Summary: Efficiency, stability, and cost-effectiveness are the prime challenges in research of materials for solar cells. This study explores carbon nanotubes as alternative counter electrode materials for dye-sensitized solar cells (DSSCs) and discusses various classes of carbon nanotube-based counter electrode materials comprehensively. The properties associated with these materials are analyzed and compared. Additionally, this study includes a brief overview of materials for other components of DSSCs.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure and wear behavior of laser clad interstitial CoCrFeNi high entropy alloy coating reinforced by carbon nanotubes

Bing Han et al.

Summary: The effect of carbon nanotubes (CNTs) in reinforcing a laser clad interstitial CoCrFeNi high entropy alloy coating was investigated. The addition of CNTs enhanced the hardness and wear properties of the coating. The microstructure of the CNTs on the powder surface was well protected from damage, and the wear rate of the coating was significantly reduced. This improvement in wear performance was attributed to the solution strengthening and precipitation strengthening effects of carbon and carbides.

SURFACE & COATINGS TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Structure and properties of nickel-plated CNTs/Fe-based amorphous composite coatings fabricated by high-speed laser cladding

Wuyan Yuan et al.

Summary: Nickel-plated carbon nanotubes (CNTs) as additives can enhance the friction and corrosion properties of composite materials. The preparation of nickel-coated CNTs/FeCoNbBSi amorphous composite coatings on a steel shaft surface improved microstructure refinement, reduced friction coefficient, improved wear morphology, and increased corrosion resistance.

SURFACE & COATINGS TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Mechanical and biological properties of atmospheric plasma-sprayed carbon nanotube-reinforced tantalum pentoxide composite coatings on Ti6Al4V alloy

W. T. Lin et al.

Summary: The addition of CNTs improves the indentation fracture toughness of Ta2O5 coatings deposited by atmospheric plasma spraying, without degrading their surface morphology and roughness. However, higher CNT content increases the coating porosity and reduces the microhardness.

SURFACE & COATINGS TECHNOLOGY (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review on biomedical implant materials and the effect of friction stir based techniques on their mechanical and tribological properties

Kaveh Moghadasi et al.

Summary: This article primarily discusses the multidisciplinary topic of biocompatible implant surfaces, providing an overview of commonly used biomaterials and their surface properties, as well as surface modification techniques using friction stir methods. These methods have the potential to extend the lifespan of implants.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of carbon nanotubes on the microstructure and properties of plasma electrolytic oxidized ceramic coatings on high silicon aluminum alloy

Lang Yu et al.

Summary: This study investigated the effects of ceramic coatings with carbon nanotubes on high silicon aluminum alloy, revealing that CNTs participate in the formation and growth of the coatings, regulate the microstructure, and affect the properties including electrochemical corrosion and thermal conductivity.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Review Energy & Fuels

Recent advancement in three dimensional graphene-carbon nanotubes hybrid materials for energy storage and conversion applications

Jeevan Jyoti et al.

Summary: This review article provides a comprehensive overview of the development and applications of three-dimensional graphene-carbon nanotube (3D-GCNTs) hybrid materials. The synthesis of GCNTs, bonding between CNTs and graphene, and potential applications in energy conversion and storage devices are thoroughly discussed.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Chemistry, Physical

Multiwalled-carbon nanotubes reinforced hydroxyapatite- tantalum pentoxide nanocomposite coating on Nitinol alloy: Antibacterial activity and Electrochemical properties

Nazila Horandghadim et al.

Summary: In this study, antibacterial implants were developed by incorporating different amounts of multi-walled carbon nanotubes (MWCNTs) with hydroxyapatite-tantalum pentoxide (HA-Ta2O5) and applying them onto NiTi using electrophoretic deposition (EPD) method. The addition of MWCNTs increased the density of the HA-Ta2O5 coating and improved its adhesion strength to NiTi. Furthermore, the MWCNTs enhanced the antibacterial property and electrochemical behavior of the coating.

SURFACES AND INTERFACES (2022)

添加到收藏夹

Article Materials Science, Characterization & Testing

Functionalization of the PLLA surface with a femtosecond laser: Tailored substrate properties for cellular response

Bartlomiej Kryszak et al.

Summary: This paper presents the possibilities of using a femtosecond fiber laser to modify the surface of PLLA. Different surface structures were obtained by overlapping pulses, and their morphology, roughness, wettability, and chemical structure were examined. Cellular studies showed no cytotoxicity and promoted fibroblast colonization. The ability of the modified surfaces to be colonized by bacteria and fungi was also assessed.

POLYMER TESTING (2022)

添加到收藏夹

Article Chemistry, Applied

Influence of acidic and alkaline environmental anticorrosive performance of epoxy coatings based on polyaniline/carbon nanotube hybrids modified with ionic liquid

Loan F. Calheiros Souto et al.

Summary: Polyaniline (PAni) and their hybrids with carbon nanotube (PAni@CNT) were prepared using an ionic liquid (IL). The IL improved the redox activity of PAni@CNT and PAni in different pH media. Epoxy-based coatings containing 1% of these materials showed enhanced corrosion resistance, especially with the presence of IL. The morphology and band gap energy of the films were also influenced by the IL, indicating improved charge transfer between particles.

PROGRESS IN ORGANIC COATINGS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Microstructural, mechanical and tribological properties of carbon nanotubes reinforced plasma sprayed molybdenum disulphide composite coatings

Aminul Islam et al.

Summary: This study investigates the effect of carbon nanotubes reinforcement on molybdenum disulphide coatings. The results show that the composite coating has improved hardness and elastic modulus, lower coefficient of friction, and reduced wear weight loss. This indicates a synergistic interaction between carbon nanotubes and molybdenum disulphide, resulting in high-quality wear resistant coatings.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Review Engineering, Mechanical

Strategies for improving friction behavior based on carbon nanotube additive materials

Yunqing Gu et al.

Summary: This paper reviews the research status and improvement mechanism of the tribological properties of materials based on carbon nanotubes (CNTs) as additives, analyzing the unique spatial structure and properties of CNTs and discussing the feasibility of using them as additive materials to improve tribological properties. It presents the effects of CNTs as additives on friction coefficient and wear performance from different perspectives (size effect, structure effect, concentration effect, dispersion effect, individual effect, synergistic effect) in lubricants and coatings, and prospects future research on the application of CNTs in tribology.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

Biosynthesis of silver nanoparticle composites based on hesperidin and pectin and their synergistic antibacterial mechanism

Zhi-yuan Zhao et al.

Summary: Hesperidin-Pectin silver nanoparticles (HP-AgNPs) were prepared using a microwave-assisted process, and their antibacterial activity was investigated against E. coli. The results showed that HP-AgNPs2 exhibited significant antibacterial properties, causing damage to the cell wall of E. coli and increasing the production of reactive oxygen species (ROS). Moreover, most of the released Ag+ was taken up by E. coli.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

添加到收藏夹

Review Materials Science, Characterization & Testing

A review of electrical and thermal conductivities of epoxy resin systems reinforced with carbon nanotubes and graphene-based nanoparticles

Seyed Rasoul Mousavi et al.

Summary: This article provides an overview of the recent advances in research on improving the thermal and electrical conductivities of EP resin systems modified with CNT, Gr, their derivatives, and hybrids. Surface modification of these reinforcements is also discussed as a means to enhance the dispersion of nanofillers in EP resins.

POLYMER TESTING (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Carbon nanotubes in biomedical applications: current status, promises, and challenges

Bhushan O. Murjani et al.

Summary: In the past decade, there has been significant progress in the field of nanomaterials, particularly in the study of carbon nanotubes. Carbon nanotubes possess excellent mechanical, electronic, and physical properties, which make them versatile for various applications. In recent years, their use in biomedical applications such as drug delivery, tissue engineering, and cancer treatment has dramatically increased. Carbon nanotubes can prolong the lifespan of drugs in the human body and serve as highly efficient biosensors and bioimaging agents.

CARBON LETTERS (2022)

添加到收藏夹

Article Chemistry, Physical

Dendritic-hydroxyzinc stannate loaded carbon nanotubes for enhancing flame retardancy of composite coatings

Chunlin Chen et al.

Summary: A novel tree-like flame retardant was used to enhance the fire resistance of epoxy coatings. The composite coating showed excellent flame retardant and smoke suppression effects, as well as high carbon residue content. The introduction of nano materials also helped the curing process of the epoxy coating.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

添加到收藏夹

Review Mechanics

Functionally graded carbon nanotubes reinforced composite structures: An extensive review

Sourabh Kumar Soni et al.

Summary: This study presents a comprehensive review of the research on functionally graded carbon nanotubes reinforced composite (FG-CNTRC) structures. The researchers reviewed the mechanical, vibration, thermal, thermo-mechanical, and low-velocity impact responses of these structures through both experimental and theoretical studies, and discussed the challenges and critical areas for future research.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Composites

A space stealth and cosmic radiation shielding composite: Polydopamine-coating and multi-walled carbon nanotube grafting onto an ultra-high-molecular-weight polyethylene/hydrogen-rich benzoxazine composite

Ji-Hun Cha et al.

Summary: By applying stealth design to satellites, it is possible to evade ground observation, enhance reconnaissance activities, and improve survivability by preventing attacks from anti-satellite weapons. The use of a shield that absorbs microwave irradiation in the developed UHMWPE composite not only enhances cosmic radiation shielding but also prevents electronic malfunction.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Construction of superhydrophobic alkyl siloxane-modified carbon nanotubes/epoxy coating

Zhongbo Zhu et al.

Summary: In this study, a superhydrophobic epoxy resin coating with siloxane-modified carbon nanotubes was successfully prepared. The coating exhibited excellent superhydrophobicity, self-cleaning properties, and improved corrosion resistance.

DIAMOND AND RELATED MATERIALS (2022)

添加到收藏夹

Article Electrochemistry

Nano-confinement coating strategy derived Matryoshka-like carbon nanotubes@anatase nanocrystalline@amorphous carbon nanofibers for ultrafast sodium ion storage

Yuan Xia et al.

Summary: A Matryoshka-like carbon nanotubes@anatase nanocrystalline@amorphous carbon (CNTs@aTiO(2)@C) nanofibers is developed for ultrafast sodium ion storage, showing outstanding reversible specific capacities and Coulombic efficiency.

ELECTROCHIMICA ACTA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Robust photothermal self-healing superhydrophobic coating based on carbon nanosphere/carbon nanotube composite

Yiqi Ma et al.

Summary: In this study, a photothermal superhydrophobic surface was fabricated using carbon nanospheres/carbon nanotubes (CNSs/CNTs) composite, and its self-healing effect under solar irradiation was demonstrated. The coating exhibited excellent superhydrophobic properties with a water contact angle of 160.7 degrees and sliding angle of 4.0 degrees, and could convert light energy into heat energy efficiently. The self-healing mechanism of the coating was found to involve the migration of hydrophobic long chains under thermodynamic drive.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

The light absorption enhancement of nanostructured carbon-based coatings fabricated by high-voltage electrostatic spraying technique

Yingpu Huang et al.

Summary: This study aims to achieve excellent light absorption in the visible to near-infrared region by fabricating nanostructured and disordered carbon-based coatings. Results show that the CNT/CNP-TiN coating, with CNT as the framework and CNP and TiN nanoparticles as loads, exhibits excellent light absorption properties due to the formation of honeycomb clusters and the existence of multi-sized optical cavities.

OPTICAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Applied

Thermal enhancement by constructing ordered-orienting hybrid network with modified boron nitride, graphene and carbon nanotubes in epoxy composite coatings

Xinyu Li et al.

Summary: A layer-by-layer ordered-orienting hybrid network was fabricated using hydroxyl functionalized hexagonal boron nitride, graphene, and carbon nanotubes to enhance thermal conductivity. The enhanced thermal conductivity is achieved through the structural complementarity between these fillers, forming an ordered-orienting heat conduction path to reduce phonon scattering and interface thermal resistance.

PROGRESS IN ORGANIC COATINGS (2022)

添加到收藏夹

Review Engineering, Electrical & Electronic

A critical review of the recent progress on carbon nanotubes-based nanogenerators

Nasrin Afsarimanesh et al.

Summary: The paper presents a comprehensive review of the research on the use of carbon nanotubes in fabricating and utilizing nanogenerators. Carbon nanotubes have exceptional electromechanical characteristics that make them suitable for creating dynamic sensing prototypes and efficient energy-harvesting devices. However, there are still challenges that need to be addressed in order to improve the performance of these devices in controlled and real-time situations.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

添加到收藏夹

Review Chemistry, Analytical

Recent advances in carbon nanotube-based biosensors for biomolecular detection

Benhui Dai et al.

Summary: This article discusses the use of carbon nanotubes (CNTs) in biosensors to improve their performance. The unique properties of CNTs, such as larger surface area and faster electron transfer, enhance the sensitivity and efficiency of biosensors. The article provides detailed descriptions of CNT-based sensors for detecting glucose, DNA, proteins, amino acids, and neurotransmitters. Continuous improvement in materials and structures can further enhance the detection performance of these sensors.

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Influence of Surface Modification of Titanium and Its Alloys for Medical Implants on Their Corrosion Behavior

Lukasz Pawlowski et al.

Summary: This paper presents research results on metallic materials modified by various techniques, and finds that surface modifications designed for the improvement of biological properties have a negative impact on corrosion resistance.

MATERIALS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Whether Carbon Nanotubes Are Capable, Promising, and Safe for Their Application in Nervous System Regeneration. Some Critical Remarks and Research Strategies

Andrzej Zielinski et al.

Summary: Carbon nanotubes are widely used in various medical fields, including the regeneration or rebuilding of nervous system components. Surface-modified multi-walled carbon nanotubes have shown promise in improving the functions of the nervous system, although there are some drawbacks that need to be addressed. This review proposes a novel approach of using a nondegradable scaffold structure composed of a conductive polymer, a selected nanocarbon form (with multi-walled carbon nanotubes as the first candidate), and a corrosion-resistant metal.

COATINGS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Research progress on enhancement mechanism and mechanical properties of FRP composites reinforced with graphene and carbon nanotubes

Wenqin Han et al.

Alexandria Engineering Journal (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Carbon nanotubes: Types, synthesis, cytotoxicity and applications in biomedical

Ajay Thakur et al.

Summary: Carbon nanotubes (CNTs) are considered as allotropic forms of carbon, possessing unique properties. However, the toxicity of CNTs hinders their biomedical applications. This review summarizes the various factors influencing CNTs toxicity and discusses their potential applications in tissue engineering, drug release, and gene therapy.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Chemistry, Analytical

Non-noble metal FeMn and single-walled carbon nanotubes nanocomposites as effective bifunctional electrocatalysts in alkaline media for oxygen/hydrogen revolution reactions

Hai Deng et al.

Summary: In this study, a new FeMnx/SWCNTs nanocomposite was designed and synthesized using the direct current arc discharge method. The results showed that the composite exhibited excellent oxygen/hydrogen evolution reaction performance in alkaline solution. The synergistic effect between FeMn compounds and single-walled carbon nanotubes was found to enhance the active sites and optimize the electronic structure of the composite, leading to improved OER and HER performance.

CHINESE JOURNAL OF ANALYTICAL CHEMISTRY (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

MWCNTS-YSZ coating deposited by plasma thermal spray on ICONEL 738 low carbon substrate

Sarah Abdulameer et al.

Summary: The surface of Inconel 738 LC samples was coated with carbon nanotube and yttria stabilized zirconia using the plasma thermal spray method. Cyclic hot corrosion testing was conducted and SEM and XRD analysis were performed. Coating thickness was quantified using SEM cross-section micrographs. The best coating to resist hot corrosion was shown to be specimens coated with 92% wt. yttria + 8%wt. carbon nanotube. X-ray analysis revealed the absence of oxides in the base specimens.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Review Engineering, Biomedical

Recent developments in electrophoretic deposition (EPD) of antibacterial coatings for biomedical applications- A review

Zoya Hadzhieva et al.

Summary: Electrophoretic deposition (EPD) is an effective coating technology that imparts antibacterial properties to medical implants without altering the material's properties. This review paper summarizes novel strategies using EPD to prevent bacterial infections, based on relevant studies from the past two years, and critically reflects on the future prospects of EPD-based biomedical coatings.

CURRENT OPINION IN BIOMEDICAL ENGINEERING (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Advanced functional carbon nanotube fibers from preparation to application

Fei Wang et al.

Summary: Carbon nanotube fibers (CNTFs) have attracted significant attention due to their exceptional properties, and various functionalization strategies have been developed to meet the requirements of different applications. Advanced functional CNTFs have been applied in artificial muscles, fiber-shaped energy storage devices, flexible sensors, and other areas, showing great potential for future applications.

CELL REPORTS PHYSICAL SCIENCE (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

A MACEing silicon: Towards single-step etching of defined porous nanostructures for biomedicine

Hashim Alhmoud et al.

Summary: Metal-assisted chemical etching (MACE) offers control over size, shape, and porosity of porous silicon nanostructures in a single step, making them suitable as biomaterials. The simplicity and flexibility of MACE are advantages, but the complexity of reaction parameters and lack of a complete model hinder rational design. Current understanding of the MACE reaction mechanism still contains uncertainties.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Carbon nanotubes reinforced with natural/synthetic polymers to mimic the extracellular matrices of bone e a review

S. Arumugam et al.

Summary: The development of suitable bioactive scaffolds for bone tissue engineering is crucial to mimic the extracellular bone matrix, while the use of CNTs-reinforced composites in the biomedical field is increasing due to their outstanding properties.

MATERIALS TODAY CHEMISTRY (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Functionalization as a way to enhance dispersion of carbon nanotubes in matrices: a review

L. Lavagna et al.

Summary: Three decades of scientific scrutiny on carbon nanotubes (CNTs) have shown that challenges in handling and dispersing CNTs, as well as their limited interaction with other materials due to their structure, can impact technological applications. A thorough understanding of CNT properties and selecting appropriate dispersion procedures are essential for achieving desired nanocomposite properties. Advanced knowledge on CNT synthesis, functionalization methods, and dispersion techniques is crucial for addressing these challenges.

MATERIALS TODAY CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Analytical

Antibacterial mechanism for inactivation of E. Coli by AgNPs@polydoamine/titania nanotubes via speciation analysis of silver ions and silver nanoparticles by cation exchange reaction

Congling Yang et al.

Summary: A method was developed for speciation analysis and accurate detection of silver ions and silver nanoparticles at trace levels. The results indicate that silver nanoparticles anchored on polydopamine/titania nanotubes play a crucial role in bactericidal action, while released silver ions synergistically enhance the antibacterial activity.

MICROCHEMICAL JOURNAL (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect of carbon nanotubes content on microstructure and properties of WC/Ni laser cladding coatings

Jinduo Liu et al.

Summary: Carbon nanotubes were used as reinforcing materials in laser cladding to enhance the mechanical properties of Ni-WC coatings. The study investigated the effect of CNTs content on phase composition and microstructure using OM, SEM with EDS, and XRD. Results showed that an appropriate addition of 3 wt-% CNTs led to the highest microhardness and wear resistance in the coatings.

SURFACE ENGINEERING (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Electrostatically Sprayed Nanostructured Electrodes for Energy Conversion and Storage Devices

Bhavana Joshi et al.

Summary: The electrostatic spray method is a promising nonvacuum technique for efficient deposition of thin films from solutions or dispersions, offering versatility in morphological engineering of nanostructured films. Current advances in electrostatic spraying can produce exceptional morphologies, notably useful in enhancing performance in electrochemical applications. Interesting morphologies of metal oxides and their composites produced by electrostatic spraying highlight enhanced energy conversion and storage performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of nanoscale surface topography on the adsorption of globular proteins

Yu Yang et al.

Summary: The study demonstrates that nanoscale surface features have a significant impact on protein adsorption, showing high protein- and material-specificity. Different proteins of varying sizes and charges exhibit distinct behaviors in adsorption on different surfaces.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Enhanced flexible polypropylene fabric with silver/magnetic carbon nanotubes coatings for electromagnetic interference shielding

Long Hu et al.

Summary: The novel Ag/mCNTs composite coatings, prepared on PP fabrics, exhibit excellent flexibility, conductivity, and EMI shielding properties, providing new possibilities for high-performance EMI shielding flexible electronics.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Review Chemistry, Physical

Carbon nanotubes for cardiac tissue regeneration: State of the art and perspectives

Myriam Barrejon et al.

Summary: Carbon nanotubes have shown great potential as innovative components for developing next-generation scaffolds for cardiac tissue regeneration. Their unique mechanical and electronic properties, along with the ability to be chemically modified, make them promising candidates for engineered cardiac constructs. The integration of CNTs with polymeric scaffolds can boost the behavior of cardiomyocytes and mimic the structure of the myocardium, showing promising prospects for cardiac regeneration.

CARBON (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings

Wuyan Yuan et al.

Summary: The study showed that high-speed laser cladding technology can improve coating preparation efficiency and performance compared to traditional laser cladding. The high-speed laser cladding coatings had thinner thickness, finer microstructure, higher hardness, and better wear and corrosion resistance.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Synthesis of carbon nanotube reinforced Al matrix composite coatings via cold spray deposition

Xinliang Xie et al.

Summary: In this study, two methods were used to disperse carbon nanotubes into aluminum powders and deposited onto stainless steel plates to fabricate composite coatings. The microstructure, distribution, and structural integrity of the carbon nanotubes in the coatings were investigated. The coating produced from SSBM powders showed significant improvement in microhardness.

SURFACE & COATINGS TECHNOLOGY (2021)

添加到收藏夹

Review Multidisciplinary Sciences

Antimicrobial and anti-adhesive properties of carbon nanotube-based surfaces for medical applications: a systematic review

Rita Teixeira-Santos et al.

Summary: The study found that surfaces containing modified CNTs, especially CNTs conjugated with different polymers, exhibited strong antimicrobial and anti-adhesive properties, protecting cells from protein adsorption. However, due to the unresolved toxicity of CNTs on the human body, they cannot yet compete with traditional strategies in fighting biofilms. This review may be helpful for the development of new engineered medical surfaces.

ISCIENCE (2021)

添加到收藏夹

Review Materials Science, Biomaterials

Physical and chemical properties of carbon nanotubes in view of mechanistic neuroscience investigations. Some outlook from condensed matter, materials science and physical chemistry

Stefano A. Mezzasalma et al.

Summary: Understanding the properties of nanomaterials is crucial for the proper application of carbon nanotubes in interaction with neuron cells. Additionally, knowledge in physical chemistry of interfaces, materials science, solid state physics at the nanoscale, and bioelectrochemistry is essential for a comprehensive understanding.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Review Polymer Science

Selective localization of carbon nanotubes and its effect on the structure and properties of polymer blends

Xiao-dong Qi et al.

Summary: This paper provides a comprehensive overview of recent progress in incorporating carbon nanotubes into binary immiscible polymer blends, including the selective localization of CNTs, induced morphology changes, rheological and crystallization behaviors, and functional properties. It also highlights the current challenges and opportunities of utilizing CNTs for immiscible blends.

PROGRESS IN POLYMER SCIENCE (2021)

添加到收藏夹

Article Engineering, Chemical

The influences of graphene and carbon nanotubes on properties of waterborne intumescent fire resistive coating

Wang Zhan et al.

Summary: Mixed carbon materials of carbon nanotubes and graphene were used as a fire retardant filler in fire resistive coatings. The combination showed synergistic effects on fire protection and thermal stability, with a weight ratio of 3:1 yielding excellent fire resistance. SEM, EDS, and XRD analysis revealed the morphology and composition of the carbon chars, indicating a higher graphene content resulted in improved water resistance, mechanical properties, and adhesion.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Microstructure and mechanical properties of Mg-14Li-1Al/MWCNTs composites prepared by electrophoretic deposition and accumulative roll bonding

Lin Xu et al.

Summary: Mg-14Li-1Al/MWCNTs composites prepared by electrophoretic deposition and accumulative roll bonding (ARB) exhibited excellent mechanical properties, with the main contributions being fine grain strengthening and dislocation strengthening, resulting in high specific strength and microhardness values.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluating the cytotoxicity of single-walled and multi-walled carbon nanotubes as a scaffold for human chondrocyte stem cell precursors and optimizing the operational conditions

Mahnaz Aghaleh et al.

Summary: This study successfully differentiated undifferentiated mesenchymal stem cell lines from amniotic membrane into human chondrocyte stem cell precursors and evaluated the cytotoxicity of different carbon nanotubes. Response surface methodology was used to optimize operational conditions and ensure the highest viability of human chondrocyte stem cell precursors on the CNT scaffold.

MATERIALS TODAY COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Internal diameter HVOAF thermal spray of carbon nanotubes reinforced WC -Co composite coatings

F. Venturi et al.

Summary: A novel process incorporating carbon nano-tubes (CNT) into WC-Co thermal spray powder has been shown to increase microhardness but decrease fracture toughness of coatings. Improved carbide retention index and wear performance were achieved by lowering process temperature and adding CNT. Tailored choice of CNT concentration offers enhanced mechanical properties for different applications.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF LASER SURFACE-TREATED Ti13Nb13Zr ALLOY WITH MWCNTs COATINGS

Beata Majkowska-Marzec et al.

Summary: Laser surface modification of titanium alloys is an effective method to enhance their properties, with the presence of a carbon nanotube coating affecting the heat affected zone, surface wettability, and surface roughness. Nanoindentation studies revealed that both laser modification and carbon coating improved mechanical properties of the samples, increasing their strength.

ADVANCES IN MATERIALS SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Tailoring the dispersibility of non-covalent functionalized multi-walled carbon nanotube (MWCNT) nanosuspension using shellac (SL) bio-resin: Structure-property relationship and cytotoxicity of shellac coated carbon nanotubes (SLCNTs)

A. K. M. Moshiul Alam et al.

Summary: This study demonstrates the successful functionalization of multi-walled carbon nanotubes (MWCNTs) using natural thermoplastic bio-resin shellac (SL) to create highly dispersible and stable SLCNT nanocomposites. The interaction between SL and MWCNT in the nanocomposites was confirmed by FTIR and Raman spectroscopy, with the SL concentration affecting the lattice parameters of the SLCNT nanocomposites. Additionally, the use of shellac significantly improved the thermal stability of SLCNT and reduced cytotoxicity on cells, suggesting potential for widespread applications.

COLLOID AND INTERFACE SCIENCE COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Physical

Recent advances and future perspectives for carbon nanostructures reinforced organic coating for anti-corrosion application

Ali Hosseinpour et al.

Summary: Carbon-based nanofillers are effective in enhancing the performance of corrosion protective organic coatings, reducing the impact of corrosion on metallic substrates, and are cost-effective. Different types of carbon-based nanofillers have multifunctional applications in coatings, with significant effects on improving corrosion protection performance.

SURFACES AND INTERFACES (2021)

添加到收藏夹

Review Chemistry, Physical

Polymer-functionalization of carbon nanotube by in situ conventional and controlled radical polymerizations

Parvaneh Eskandari et al.

Summary: This review focuses on the synthesis of polymer-functionalized CNT via both the grafting from and grafting through methods based on FRP and CRP routes, commonly known as in situ polymerizations. The challenges and applications of the in situ polymer grafting methods are discussed, providing potential insights for future research.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Tribological Behavior of Carbon Nanotubes Reinforced High Velocity Oxy-Fuel Sprayed WC-20 wt.% Co Coatings

G. Mohammed Thalib Basha et al.

Summary: The characterization of wear and microstructure in CNTs reinforced WC-20 wt.% Co coatings showed that the presence of CNTs can enhance the characteristics of the composite coatings, leading to less weight loss and improved wear resistance. The addition of CNTs can reduce wear and improve the overall performance of ceramic coatings.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review on carbon nanotube: An overview of synthesis, properties, functionalization, characterization, and the application

S. Rathinavel et al.

Summary: Carbon nanotubes (CNT) are a unique nanomaterial with characteristics such as lightweight, small size, good strength, and high conductivity. They are useful in materials like polymers, ceramics, and metallic surfaces.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2021)

添加到收藏夹

Article Optics

Microstructure and wear performance enhancement of carbon nanotubes reinforced composite coatings fabricated by laser cladding on titanium alloy

Zhiyun Ye et al.

Summary: Carbon nanotubes (CNTs) reinforced composites were successfully deposited on the surface of TA2 titanium alloy using laser cladding technology. The coating contained a large amount of nanocrystalline phases and amorphous phases. The reinforced phases in the coating helped to reduce the coefficient of friction, with self-lubricating effect and dispersion strengthening effect playing important roles.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Mechanical Behavior of Bi-Layer and Dispersion Coatings Composed of Several Nanostructures on Ti13Nb13Zr Alloy

Dorota Rogala-Wielgus et al.

Summary: The study aimed to investigate and compare the mechanical properties of different coatings on titanium implants. Results showed that the addition of nanocopper or titanium dioxide to carbon nanotubes coating can increase hardness, improve plastic and elastic properties, and enhance wear resistance and deformation resistance of the coatings.

MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Incorporation of Silver-Embedded Carbon Nanotubes Coated with Tannic Acid into Polyamide Reverse Osmosis Membranes toward High Permeability, Antifouling, and Antibacterial Properties

Afang Zhao et al.

Summary: In this study, high-performance nanocomposite reverse osmosis membranes were fabricated by synthesizing functionalized carbon nanotubes and embedding silver nanoparticles. The membrane exhibited improved water permeability and NaCl rejection, as well as excellent fouling resistance to model foulants. The long-term performance stability of the membrane was attributed to the compatibility between carbon nanotubes and the polyamide matrix.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of aligned carbon nanotube arrays and carbon/carbon composites: fabrication, thermal conduction properties and applications in thermal management

Zhi-jun Dong et al.

Summary: The development of modern technology has increased the demand for thermal management materials, with aligned carbon nanotube arrays and carbon/carbon composites being considered ideal options due to their excellent features. Researchers discussed the factors influencing thermal conductivity and fabrication methods, as well as strategies for achieving high thermal conductivity.

NEW CARBON MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mechanical Behavior of Bi-Layer and Dispersion Coatings Composed of Several Nanostructures on Ti Substrate

Dorota Rogala-Wielgus et al.

Summary: Three coatings suitable for biomedical applications, including dispersion coating composed of multi-wall carbon nanotubes (MWCNTs), MWCNTs/TiO2 bi-layer coating, and MWCNTs-Cu dispersion coating, were fabricated by electrophoretic deposition (EPD) on Ti Grade II substrate. The results showed that the MWCNTs coating with titania outer layer achieved the best mechanical properties for biomedical applications, and the addition of nanocopper and titania improved the mechanical resistance of the base MWCNTs coating. Compared to experiments on Ti13Nb13Zr alloy, a general tendency is observed to form more homogenous coatings on pure metal substrates with simpler chemical and phase compositions.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Engineering, Environmental

Multi-walled carbon nanotubes decorated with silver nanoparticles for antimicrobial applications

H. I. Hamouda et al.

Summary: The synthesized nanocomposite of Ag-MWCNTs demonstrates excellent antimicrobial capability, particularly showing higher inhibition against gram-positive bacteria and a broad-spectrum activity against various microbial strains. SEM and fluorescent microscopy analysis revealed that the antibacterial agent firmly agglutinated to the surface of bacterial cells, leading to cell wrapping, morphological disruption, and cell death.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Interface characterization and scratch resistance of plasma sprayed TiO2-CNTs nanocomposite coating

Peng-fei He et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Review Pharmacology & Pharmacy

Biomimetic carbon nanotubes for neurological disease therapeutics as inherent medication

Chenyang Xiang et al.

ACTA PHARMACEUTICA SINICA B (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Formation of a bovine serum albumin diligand complex with rutin and single-walled carbon nanotubes for the reduction of cytotoxicity

Rong Tian et al.

BIOPHYSICAL CHEMISTRY (2020)

添加到收藏夹

Article Thermodynamics

Experimental investigation of the heat transfer performance of capillary-assisted horizontal evaporator tubes with sintered porous hydrophilic copper-carbon nanotube-titanium dioxide (Cu-CNT-TiO2) composite coatings for adsorption chiller

Edward Joshua T. Pialago et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Chemistry, Physical

Silver nanoparticles-decorated and mesoporous silica coated single-walled carbon nanotubes with an enhanced antibacterial activity for killing drug-resistant bacteria

Yu Zhu et al.

NANO RESEARCH (2020)

添加到收藏夹

Review Chemistry, Physical

Functionalization of carbon nanotubes by combination of controlled radical polymerization and grafting to method

Zahra Abousalman-Rezvani et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2020)

添加到收藏夹

Article Engineering, Chemical

Electrodeposition of Hydroxyapatite-Multiwalled Carbon Nanotube Nanocomposite on Ti6Al4V

Thom T. Nguyen et al.

ADVANCES IN POLYMER TECHNOLOGY (2020)

添加到收藏夹

Article Toxicology

Cytotoxicity profiles of multi-walled carbon nanotubes with different physico-chemical properties

Katsuhide Fujita et al.

TOXICOLOGY MECHANISMS AND METHODS (2020)

添加到收藏夹

Article Chemistry, Physical

Effect of Single-Walled Carbon Nanotubes on Strength Properties of Cement Composites

Jiayuan Kang et al.

MATERIALS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

A review on graphene nanoribbons for advanced biomedical applications

Pravin Shende et al.

CARBON LETTERS (2020)

添加到收藏夹

Article Materials Science, Biomaterials

Cellulose acetate/multi-wall carbon nanotube/Ag nanofiber composite for antibacterial applications

Abdul Wahab Jatoi et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

添加到收藏夹

Article Materials Science, Biomaterials

Size-controllable preparation and antibacterial mechanism of thermo-responsive copolymer-stabilized silver nanoparticles with high antimicrobial activity

Haixun Ji et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhanced antibacterial activity and photo-remediation of toxic dyes using Ag/SWCNT/PPy based nanocomposite with core-shell structure

Amanvir Singh et al.

APPLIED NANOSCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Evolution of nano/submicro-scale oxide structures on Ti6Al4V achieved by an ultrasonic shot peening-induction heating approach for high-performance surface design of bone implants

Ning-bo Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel Perspective Coatings for the Optoelectronic Elements: Features of the Carbon Nanotubes to Modify the Surface Relief of BaF2Materials

Natalia Kamanina et al.

COATINGS (2020)

添加到收藏夹

Review Engineering, Civil

A review on the mechanics of carbon nanotube strengthened deformable structures

Hossein Bakhshi Khaniki et al.

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Article Chemistry, Physical

Mechanical and Corrosion Properties of Laser Surface-Treated Ti13Nb13Zr Alloy with MWCNTs Coatings

Beata Majkowska-Marzec et al.

MATERIALS (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Mechanical, tribological and corrosion physiognomies of CNT-Al metal matrix composite (MMC) coatings deposited by cold gas dynamic spray (CGDS) process

Yingpeng Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Environmental

An antibacterial study of a new magnetic carbon nanotube/core-shell nanohybrids

Mohammadreza Joghataeian et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Characterization of short-length multi-walled carbon nanotubes and cytotoxicity on MDA-MB-231 and HUVEC cell lines

Bircan Dinc et al.

CARBON LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Elemental carbon in the sp1 hybridization

Florian Banhart

CHEMTEXTS (2020)

添加到收藏夹

Article Electrochemistry

Electrophoretic deposition of gelatine nanoparticle/chitosan coatings

Svenja Heise et al.

ELECTROCHIMICA ACTA (2019)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis of Ag-doped TiO2 nanoparticles coated with carbon nanotubes by the sol-gel method and their antibacterial activities

Mohammad R. Mohammad et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Food Science & Technology

The toxicity of multi-walled carbon nanotubes (MWCNTs) to human endothelial cells: The influence of diameters of MWCNTs

Xuqi Zhao et al.

FOOD AND CHEMICAL TOXICOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characteristics of dilution and microstructure in laser cladding Ni-Cr-B-Si coating assisted by electromagnetic compound field

Lulu Zhai et al.

MATERIALS LETTERS (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

Characterization, mechanical and in vitro biological behavior of hydroxyapatite-titanium-carbon nanotube composite coatings deposited on NiTi alloy by electrophoretic deposition

Hossein Maleki-Ghaleh et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Physics, Multidisciplinary

Synthesis and Characterization Hybrid Materials (TiO2/MWCNTS) by Chemical Method and Evaluating Antibacterial Activity against Common Microbial Pathogens

Khalid A. Sukkar et al.

ACTA PHYSICA POLONICA A (2019)

添加到收藏夹

Article Biophysics

Square prism micropillars on poly(methyl methacrylate) surfaces modulate the morphology and differentiation of human dental pulp mesenchymal stem cells

Onur Hasturk et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of hydroxyapatite-titanium-MWCNTs composite coating fabricated by electrophoretic deposition on corrosion and cellular behavior of NiTi alloy

Hossein Maleki-Ghaleh et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2019)

添加到收藏夹

Article Materials Science, Biomaterials

Characterization and study of the antibacterial mechanisms of silver nanoparticles prepared with microalgal exopolysaccharides

Sandra M. Navarro Gallon et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

添加到收藏夹

Review Materials Science, Biomaterials

Advanced biomedical applications of carbon nanotube

V. R. Raphey et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

添加到收藏夹

Article Chemistry, Analytical

Biosynthesis of large-sized silver nanoparticles using Angelica keiskei extract and its antibacterial activity and mechanisms investigation

Juan Du et al.

MICROCHEMICAL JOURNAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A multivalent polyanion-dispersed carbon nanotube toward highly bioactive nanostructured fibrous stem cell scaffolds

Yi Xia et al.

APPLIED MATERIALS TODAY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Multi-Walled Carbon Nanotubes (MWCNTs) Activate Apoptotic Pathway Through ER Stress: Does Surface Chemistry Matter?

Yongbing Sun et al.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2019)

添加到收藏夹

Article Environmental Sciences

Antibacterial effects of graphene- and carbon-nanotube-based nanohybrids on Escherichia coli: Implications for treating multidrug-resistant bacteria

Soyoung Baek et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparison of Properties of the Hybrid and Bilayer MWCNTs-Hydroxyapatite Coatings on Ti Alloy

Beata Majkowska-Marzec et al.

COATINGS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

A novel approach for fabricating a CNT/AlSi composite with the self-aligned nacre-like architecture by cold spraying

Xinliang Xie et al.

NANO MATERIALS SCIENCE (2019)

添加到收藏夹

Article Engineering, Chemical

A facile method to prepare size-tunable silver nanoparticles and its antibacterial mechanism

Yunping Wu et al.

ADVANCED POWDER TECHNOLOGY (2018)

添加到收藏夹

Review Medicine, Research & Experimental

A short view on nanohydroxyapatite as coating of dental implants

Javad Yazdani et al.

BIOMEDICINE & PHARMACOTHERAPY (2018)

添加到收藏夹

Article Chemistry, Physical

Facile construction of Ag nanoparticles encapsulated into carbon nanotubes with robust antibacterial activity

Lixin Xia et al.

CARBON (2018)

添加到收藏夹

Article Chemistry, Physical

Direct nanomechanical characterization of carbon nanotubes titanium interfaces

Chenglin Yi et al.

CARBON (2018)

添加到收藏夹

Article Materials Science, Ceramics

Effect of carbon nanotubes and aluminum oxide on the properties of a plasma sprayed thermal barrier coating

J. G. Thakare et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis and properties of HA/ZnO/CNT nanocomposite

M. Ding et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Adsorption of human serum albumin on functionalized single-walled carbon nanotubes reduced cytotoxicity

Naihao Lu et al.

CHEMICO-BIOLOGICAL INTERACTIONS (2018)

添加到收藏夹

Article Biophysics

Electrochemically grown functionalized -Multi-walled carbon nanotubes/hydroxyapatite hybrids on surgical grade 316L SS with enhanced corrosion resistance and bioactivity

Arul Xavier Stango et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Remarkably Improvement in Antibacterial Activity of Carbon Nanotubes by Hybridizing with Silver Nanodots

Yanjiao Ma et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Ceramics

Alumina-graphene nanocomposite coatings fabricated by suspension high velocity oxy-fuel thermal spraying for ultra-low-wear

James W. Murray et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Article Materials Science, Biomaterials

Influences of ionic liquid and temperature on the tailorable surface morphology of F-apatite nanocomposites for enhancing biological abilities for orthopedic implantation

Jegatheeswaran Sonamuthu et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Floating catalyst CVD synthesis of single walled carbon nanotubes from ethylene for high performance transparent electrodes

Aqeel Hussain et al.

NANOSCALE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis of Fe- or Ag-doped TiO2-MWCNT nanocomposite thin films and their visible-light-induced catalysis of dye degradation and antibacterial activity

Md Asjad Hossain et al.

RESEARCH ON CHEMICAL INTERMEDIATES (2018)

添加到收藏夹

Article Chemistry, Physical

Protective trivalent Cr-based electrochemical coatings for gun barrels

Pragya Shukla et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Review Multidisciplinary Sciences

Copper/carbon nanotube composites: research trends and outlook

Rajyashree M. Sundaram et al.

ROYAL SOCIETY OPEN SCIENCE (2018)

添加到收藏夹

Proceedings Paper Engineering, Chemical

Precious Metals Recovery from Electroplating Wastewater: A Review

A. A. Azmi et al.

3RD INTERNATIONAL CONFERENCE ON GLOBAL SUSTAINABILITY AND CHEMICAL ENGINEERING (ICGSCE) (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Preparation of Ag@CNT Nanohybrids and Investigations on Their Antibacterial and Cytotoxicological Effects

Meng Yin et al.

NANOSCIENCE AND NANOTECHNOLOGY LETTERS (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Coal derived carbon nanomaterials - Recent advances in synthesis and applications

Van Chinh Hoang et al.

APPLIED MATERIALS TODAY (2018)

添加到收藏夹

Review Public, Environmental & Occupational Health

Review of toxicity studies of carbon nanotubes

Norihiro Kobayashi et al.

JOURNAL OF OCCUPATIONAL HEALTH (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

Tuning surface morphology and crystallinity of anodic TiO2 nanotubes and their response to biomimetic bone growth for implant applications

Farzad Nasirpouri et al.

SURFACE & COATINGS TECHNOLOGY (2017)

添加到收藏夹

Article Biotechnology & Applied Microbiology

The adverse vascular effects of multi-walled carbon nanotubes (MWCNTs) to human vein endothelial cells (HUVECs) in vitro: role of length of MWCNTs

Jimin Long et al.

JOURNAL OF NANOBIOTECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Physical

Direct measurements of the mechanical strength of carbon nanotube - Aluminum interfaces

Chenglin Yi et al.

CARBON (2017)

添加到收藏夹

Review Engineering, Biomedical

Carbon nanotube, graphene and boron nitride nanotube reinforced bioactive ceramics for bone repair

Chengde Gao et al.

ACTA BIOMATERIALIA (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Functionalized Carbon Nanotube and Graphene Oxide Embedded Electrically Conductive Hydrogel Synergistically Stimulates Nerve Cell Differentiation

Xifeng Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Physical

Biofunctionalization of carbon nanotubes/chitosan hybrids on Ti implants by atom layer deposited ZnO nanostructures

Yizhou Zhu et al.

APPLIED SURFACE SCIENCE (2017)

添加到收藏夹

Article Biochemistry & Molecular Biology

Effects of serum albumin on the degradation and cytotoxicity of single-walled carbon nanotubes

Yun Ding et al.

BIOPHYSICAL CHEMISTRY (2017)

添加到收藏夹

Article Chemistry, Physical

Linking growth mode to lengths of single-walled carbon nanotubes

Maoshuai He et al.

CARBON (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influence of Si as reactive bonding agent in the electrophoretic coatings of HA-Si-MWCNTs on NiTi alloys

Vida Khalili et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)

添加到收藏夹

Article Thermodynamics

Nucleate pool boiling of R134a on cold sprayed Cu-CNT-SiC and Cu-CNT-AlN composite Coatings

Edward Joshua T. Pialago et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Prediction of the mechanical behavior of double walled-CNTs using a molecular mechanics-based finite element method: Effects of chirality

Jaehyeok Doh et al.

COMPUTERS & STRUCTURES (2016)

添加到收藏夹

Article Chemistry, Medicinal

Carbon Nanotubes in Biomedical Applications: Factors, Mechanisms, and Remedies of Toxicity

Reem Alshehri et al.

JOURNAL OF MEDICINAL CHEMISTRY (2016)

添加到收藏夹

Article Chemistry, Applied

The properties of MWCNT/polyurethane conductive composite coating prepared by electrostatic spraying

Guangzhao Li et al.

PROGRESS IN ORGANIC COATINGS (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

Fe-Cr/CNTs nanocomposite feedstock powders produced by chemical vapor deposition for thermal spray coatings

S. Moonngam et al.

SURFACE & COATINGS TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

Fabrication and properties of NiCr/CNTs nanocomposite coatings prepared by High Velocity Oxy-Fuel Spraying

D. Deesom et al.

SURFACE & COATINGS TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure and photocatalytic activities of thermal sprayed titanium dioxide/carbon nanotubes composite coatings

P. Daram et al.

SURFACE & COATINGS TECHNOLOGY (2016)

添加到收藏夹

Article Chemistry, Analytical

A comparative study of the antibacterial mechanisms of silver ion and silver nanoparticles by Fourier transform infrared spectroscopy

Haoyi Li et al.

VIBRATIONAL SPECTROSCOPY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Carbon nanotube-based coatings on titanium

Elzbieta Dlugon et al.

BULLETIN OF MATERIALS SCIENCE (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hot corrosion performance of LVOF sprayed Al2O3-40% TiO2 coating on Superni 601 and Superco 605 superalloys at 800 and 900A°C

N. K. Mishra et al.

BULLETIN OF MATERIALS SCIENCE (2015)

添加到收藏夹

Article Materials Science, Ceramics

Electrophoretic deposition of biomimetic zinc substituted hydroxyapatite coatings with chitosan and carbon nanotubes on titanium

Zhenyu Zhong et al.

CERAMICS INTERNATIONAL (2015)

添加到收藏夹

Article Chemistry, Medicinal

Culture Medium-Associated Physicochemical Insights on the Cytotoxicity of Carbon Nanomaterials

Huating Kong et al.

CHEMICAL RESEARCH IN TOXICOLOGY (2015)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Mechanical properties, surface morphology and stability of a modified commercially pure high strength titanium alloy for dental implants

Carlos Nelson Elias et al.

DENTAL MATERIALS (2015)

添加到收藏夹

Article Chemistry, Physical

Preparation of MWCNT/TiO2-Co nanocomposite electrode by electrophoretic deposition and electrochemical study of hydrogen storage

Maryam Bordbar et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

添加到收藏夹

Article Chemistry, Physical

Ternary Cu-CNT-AlN composite coatings consolidated by cold spray deposition of mechanically alloyed powders

Edward Joshua T. Pialago et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Engineering, Environmental

Exploring the diameter and surface dependent conformational changes in carbon nanotube-protein corona and the related cytotoxicity

Xingchen Zhao et al.

JOURNAL OF HAZARDOUS MATERIALS (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Decoration of Silver Nanoparticles on Multiwalled Carbon Nanotubes: Antibacterial Mechanism and Ultrastructural Analysis

Ngo Xuan Dinh et al.

JOURNAL OF NANOMATERIALS (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Fabrication of superaligned carbon nanotubes reinforced copper matrix laminar composite by electrodeposition

Yu Jin et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)

添加到收藏夹

Article Chemistry, Physical

Single-walled carbon nanotubes/hydroxyapatite coatings on titanium obtained by electrochemical deposition

Xibo Pei et al.

APPLIED SURFACE SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

Effects of a carbon nanotube-collagen coating on a titanium surface on osteoblast growth

Jung Eun Park et al.

APPLIED SURFACE SCIENCE (2014)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Carbon nanotubes leading the way forward in new generation 3D tissue engineering

Erin Leigh Hopley et al.

BIOTECHNOLOGY ADVANCES (2014)

添加到收藏夹

Article Materials Science, Composites

Enhanced mechanical properties and bone bioactivity of chitosan/silica membrane by functionalized-carbon nanotube incorporation

Seog-Jin Seo et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Review Engineering, Chemical

Comparative investigation on the adhesion of hydroxyapatite coating on Ti-6Al-4V implant: A review paper

E. Mohseni et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Vitro Bacterial Cytotoxicity of CNTs: Reactive Oxygen Species Mediate Cell Damage Edges over Direct Physical Puncturing

Krishnamoorthy Rajavel et al.

LANGMUIR (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Improvement in tool life of electroplated diamond tools by Ni-based carbon nanotube composite coatings

Tsunehisa Suzuki et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2014)

添加到收藏夹

Article Materials Science, Coatings & Films

High temperature wear characteristics of TiC composite coatings formed by laser cladding with CNT additives

Q. H. Li et al.

SURFACE & COATINGS TECHNOLOGY (2014)

添加到收藏夹

Review Nanoscience & Nanotechnology

Carbon nanotubes: properties, synthesis, purification, and medical applications

Ali Eatemadi et al.

NANOSCALE RESEARCH LETTERS (2014)

添加到收藏夹

Article Chemistry, Physical

Antibacterial activity and reusability of CNT-Ag and GO-Ag nanocomposites

Ji Dang Kim et al.

APPLIED SURFACE SCIENCE (2013)

添加到收藏夹

Article Thermodynamics

Nucleate boiling heat transfer of R134a on cold sprayed CNT-Cu composite coatings

Edward Joshua T. Pialago et al.

APPLIED THERMAL ENGINEERING (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Antibacterial Activity of CNT-Ag and GO-Ag Nanocomposites Against Gram-negative and Gram-positive Bacteria

Hyosuk Yun et al.

BULLETIN OF THE KOREAN CHEMICAL SOCIETY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of carbon nanotubes reinforced hydroxyapatite composite coatings on titanium by electrodeposition method

D. Gopi et al.

CORROSION SCIENCE (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis of coal-derived single-walled carbon nanotube from coal by varying the ratio of Zr/Ni as bimetallic catalyst

Rajesh Kumar et al.

JOURNAL OF NANOPARTICLE RESEARCH (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Graphene and carbon nanotube-graphene hybrid nanomaterials for human embryonic stem cell culture

Meriam Sebaa et al.

MATERIALS LETTERS (2013)

添加到收藏夹

Review Electrochemistry

Innovations in electrophoretic deposition: Alternating current and pulsed direct current methods

Alejandra Chavez-Valdez et al.

ELECTROCHIMICA ACTA (2012)

添加到收藏夹

Article Electrochemistry

Electrophoretic deposited MWCNT composite graphite pencils and its uses to determine hyperin

Qing-Gong Zhu et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2012)

添加到收藏夹

Article Materials Science, Coatings & Films

The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats

Dina Goldbaum et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2012)

添加到收藏夹

Review Materials Science, Biomaterials

Carbon nanotube reinforced hydroxyapatite composite for orthopedic application: A review

Debrupa Lahiri et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Low Doses of Pristine and Oxidized Single-Wall Carbon Nanotubes Affect Mammalian Embryonic Development

Antonio Pietroiusti et al.

ACS NANO (2011)

添加到收藏夹

Review Chemistry, Multidisciplinary

Double-walled carbon nanotubes: Challenges and opportunities

Cai Shen et al.

NANOSCALE (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

A comparison of mechanical and wear properties of plasma sprayed carbon nanotube reinforced aluminum composites at nano and macro scale

Srinivasa R. Bakshi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Laser-based nanoengineering of surface topographies for biomedical applications

Sabrina Schlie et al.

PHOTONICS AND NANOSTRUCTURES-FUNDAMENTALS AND APPLICATIONS (2011)

添加到收藏夹

Article Multidisciplinary Sciences

Diameter and rigidity of multiwalled carbon nanotubes are critical factors in mesothelial injury and carcinogenesis

Hirotaka Nagai et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2011)

添加到收藏夹

Article Engineering, Biomedical

Characterization of carbon nanotube (MWCNT) containing P(3HB)/bioactive glass composites for tissue engineering applications

Superb K. Misra et al.

ACTA BIOMATERIALIA (2010)

添加到收藏夹

Review Engineering, Chemical

A REVIEW ON CARBON NANOTUBES IN AN ENVIRONMENTAL PROTECTION AND GREEN ENGINEERING PERSPECTIVE

Yit Thai Ong et al.

BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING (2010)

添加到收藏夹

Article Chemistry, Multidisciplinary

Antibacterial action of dispersed single-walled carbon nanotubes on Escherichia coli and Bacillus subtilis investigated by atomic force microscopy

Shaobin Liu et al.

NANOSCALE (2010)

添加到收藏夹

Review Pharmacology & Pharmacy

Carbon nanofibers and carbon nanotubes in regenerative medicine

Phong A. Tran et al.

ADVANCED DRUG DELIVERY REVIEWS (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Carbon Nanotubes Carrying Cell-Adhesion Peptides do not Interfere with Neuronal Functionality

Claire Gaillard et al.

ADVANCED MATERIALS (2009)

添加到收藏夹

Article Chemistry, Physical

A novel graded bioactive high adhesion implant coating

Ulrika Brohede et al.

APPLIED SURFACE SCIENCE (2009)

添加到收藏夹

Review Materials Science, Coatings & Films

Modeling and Control of High-Velocity Oxygen-Fuel (HVOF) Thermal Spray: A Tutorial Review

Mingheng Li et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2009)

添加到收藏夹

Article Materials Science, Coatings & Films

Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spraying of spray dried powders

Srinivasa R. Bakshi et al.

SURFACE & COATINGS TECHNOLOGY (2009)

添加到收藏夹

Article Chemistry, Physical

The confined growth of double-walled carbon nanotubes in porous catalysts by chemical vapor deposition

Yi Liu et al.

CARBON (2008)

添加到收藏夹

Review Physics, Applied

Surface characterization and functionalization of carbon nanofibers

K. L. Klein et al.

JOURNAL OF APPLIED PHYSICS (2008)

添加到收藏夹

Review Nanoscience & Nanotechnology

Carbon nanotubes as functional excipients for nanomedicines: I. pharmaceutical properties

Marianna Foldvari et al.

NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2008)

添加到收藏夹

Article Engineering, Biomedical

Electrophoretic deposition of HA/MWNTs composite coating for biomaterial applications

Changjian Lin et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2008)

添加到收藏夹

Article Chemistry, Physical

Toxicology of carbon nanomaterials: Status, trends, and perspectives on the special issue

RH Hurt et al.

CARBON (2006)

添加到收藏夹

Article Chemistry, Physical

Coal-derived carbon nanotubes by thermal plasma jet

Y Tian et al.

CARBON (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bonding mechanism in cold gas spraying

H Assadi et al.

ACTA MATERIALIA (2003)

添加到收藏夹

Article Chemistry, Physical

Growth conditions of double-walled carbon nanotubes in arc discharge

Y Saito et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2003)

添加到收藏夹

Review Materials Science, Composites

Advances in the science and technology of carbon nanotubes and their composites: a review

ET Thostenson et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.