☆ 4.8 Article

Aerosol Jet Printing Conductive 3D Microstructures from Graphene Without Post-Processing

SMALL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Three-Dimensional Printing of Ag Nanoparticle Meshes for Antibacterial Activity

Dae-Seob Song et al.

Summary: In this study, a facile process was developed to print a 3D microstructure of silver nanoparticles (Ag NPs) for antibacterial applications. The printed Ag NP mesh retained the properties of Ag NPs, and various mesh sizes and porosities were evaluated as antibacterial filters. A prototype water filter with three mesh layers effectively filtered out all active bacteria, demonstrating the viability of the proposed Ag NP 3D printing process for manufacturing antibacterial microstructures.

ACS APPLIED NANO MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printed Template-Directed Assembly of Multiscale Graphene Structures

Jingzhuo Zhou et al.

Summary: Using graphene as a model building block, the fabrication of multiscale structures with tailorable features spanning seven orders of magnitude in size is achieved by a 3D printed template-directed assembly method. The structures demonstrate extraordinary properties such as ultralow density, ultrahigh stiffness, and compressibility.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Constructing Flexible All-Solid-State Supercapacitors from 3D Nanosheets Active Bricks via 3D Manufacturing Technology: A Perspective Review

Bolin Li et al.

Summary: This paper proposes a new approach to the design of flexible all-solid-state supercapacitors using advanced 3D printing technology and provides theoretical guidance for their practical applications through the analysis of 3D nanosheets active materials and design methods.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Direct Ink Writing: A 3D Printing Technology for Diverse Materials

M. A. S. R. Saadi et al.

Summary: Direct ink writing (DIW) is a versatile 3D printing technique that allows printing of a wide range of materials. This comprehensive review explores the process of DIW printing of complex 3D structures and discusses its diverse applications in various industries.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

3D-printed hierarchical pillar array electrodes for high-performance semi-artificial photosynthesis

Xiaolong Chen et al.

Summary: The use of aerosol jet printing with indium tin oxide nanoparticles allows for the generation of hierarchical electrode structures that meet the complex requirements for high biophotoelectrochemical performance. The resulting micropillar array electrodes, when wired to cyanobacteria, exhibit significantly improved biocatalyst loading, light utilization, and electron flux output. This study demonstrates a promising approach to more efficiently harnessing bio-energy from photosynthesis and provides new tools for three-dimensional electrode design.

NATURE MATERIALS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Nano-Functionalized Electrochemical Sensors by Aerosol Jet Printing

Tiziano Fapanni et al.

Summary: In recent years, the quantification of hydrogen peroxide has attracted increasing attention in various fields. Electrochemical transducers have gained particular interest due to their ease of fabrication, convenient integration with microfluidics and electronics, and cost-effectiveness. This study utilizes the novel technique of Aerosol jet printing to fabricate fully printed nanostructured electrochemical sensors for hydrogen peroxide detection. The performances of carbon nanotubes (CNTs) and graphene as printable nanostructures are explored and discussed. Both materials demonstrate comparable limit of detections (LODs) and sensitivity, with CNTs performing better in terms of sensitivity and graphene having a better resistance against noise.

IEEE SENSORS JOURNAL (2022)

添加到收藏夹

Article Polymer Science

Aerosol Jet Printing of 3D Pillar Arrays from Photopolymer Ink

Vitor Vlnieska et al.

Summary: This study explores the use of aerosol jet printing (AJP) for 3D printing of free-standing pillar arrays. Using aryl epoxy photopolymer ink coupled with a cross-linking on the fly technique, pillar structures with a diameter of 50 μm and a height of 550 μm were successfully printed. The study also finds that satellite droplets and overspray are unavoidable for structures smaller than 70 μm, but can be mitigated by reactive ion etching (RIE) as a post-processing step.

POLYMERS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ionic dielectrics for fully printed carbon nanotube transistors: impact of composition and induced stresses

Brittany N. Smith et al.

Summary: Printed carbon nanotube thin-film transistors (CNT-TFTs) are promising for flexible electronics, but printing the gate dielectric layer is challenging. Ionic dielectrics show potential but their composition and stress effects are not well understood. This study investigates three different ionic dielectrics in fully printed CNT-TFTs and reveals trade-offs in performance and stability. CNC exhibits the best low-voltage operation, while ion gel and elastomer show better stability under bias and mechanical stress.

NANOSCALE (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

3D Printed Ultrasensitive Graphene Hydrogel Self-Adhesive Wearable Devices

Zhaolong Wang et al.

Summary: This study introduces a stretchable, highly conductive, and self-adhesive ionic hydrogel fabricated with an LCD light-curing 3D printing technique. The hydrogel exhibits outstanding electrical conductivity, excellent stretchability, and strong adhesion performance. It can be used in the manufacturing of flexible wearable devices and monitoring human movements and physiological signals.

ACS APPLIED ELECTRONIC MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Sensing of COVID-19 Antibodies in Seconds via Aerosol Jet Nanoprinted Reduced-Graphene-Oxide-Coated 3D Electrodes

Md Azahar Ali et al.

Summary: This study presents an advanced biosensing platform based on nanomaterials for rapid detection of COVID-19 antibodies. By combining 3D nanoprinting technology and nanoflakes of reduced-graphene-oxide, it achieves fast and sensitive detection of antibodies, with potential for biomarker detection in other infectious diseases.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrasensitive 3D Aerosol-Jet-Printed Perovskite X-ray Photodetector

Anastasiia Glushkova et al.

Summary: X-ray photon detection is essential for various applications, with medical imaging being the highest-demand field requiring cost-effective, high-resolution detectors. The use of MAPbI(3) material has shown great potential due to its advantageous optoelectronic properties. 3D aerosol jet printing method demonstrated a promising way to build X-ray detector units, with record sensitivity and 4-fold improvement over best-in-class devices.

ACS NANO (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

In-Place Printing of Flexible Electrolyte-Gated Carbon Nanotube Transistors With Enhanced Stability

Jorge A. Cardenas et al.

Summary: This study demonstrates a simple and rapid 4-step in-place printing procedure for producing low-voltage electrolyte-gated carbon nanotube thin-film transistors, with optimized performance achieved by rinsing CNT films and printing an ion gel in-place using an elevated platen temperature. Devices showed exceptional flexibility and electrochemical stability under mechanical strain and long-term bias tests, suggesting new avenues for improving bias stress stability in electrolyte-gated transistors.

IEEE ELECTRON DEVICE LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bringing Electrochemical Three-Dimensional Printing to the Nanoscale

Julian Hengsteler et al.

Summary: Electrochemical 3D printing has achieved a new breakthrough at the nanoscale, allowing for layer-by-layer manufacturing of 25 nm diameter conductive structures. By controlling the printing process, real-time adjustments of feature sizes and printing of tilted and overhanging structures are made possible.

NANO LETTERS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

A high-sensitivity graphene ammonia sensor via aerosol jet printing

Yuchao Zhu et al.

Summary: Graphene-based ammonia gas sensor fabricated using aerosol-jet printing technology shows high sensitivity, short response time, good reversibility, and repeatability. Additional micro-heater near the sensing line further reduces desorption time. This design provides insight into graphene-based sensors and facilitates integration with other sensors in portable instruments.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Printable and recyclable carbon electronics using crystalline nanocellulose dielectrics

Nicholas X. Williams et al.

Summary: This study presents the use of all-carbon thin-film transistors, printed on paper substrates and the constituent materials subsequently recycled, achieving stable performance outcomes.

NATURE ELECTRONICS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

A digital microfluidic system with 3D microstructures for single-cell culture

Jiao Zhai et al.

MICROSYSTEMS & NANOENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Aerosol-jet-printed graphene electrochemical histamine sensors for food safety monitoring

Kshama Parate et al.

2D MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Optimization of printed sensors to monitor sodium, ammonium, and lactate in sweat

Alla M. Zamarayeva et al.

APL MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Inkjet printing-based fabrication of microscale 3D ice structures

Fengyi Zheng et al.

MICROSYSTEMS & NANOENGINEERING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

3D printed microstructures for flexible electronic devices

Yiming Liu et al.

NANOTECHNOLOGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics

Pei He et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Silver nanowire inks for direct-write electronic tattoo applications

Nicholas X. Williams et al.

NANOSCALE (2019)

添加到收藏夹

Article Electrochemistry

Effect of polymer binders on graphene-based free-standing electrodes for supercapacitors

Bo Song et al.

ELECTROCHIMICA ACTA (2018)

添加到收藏夹

Article Engineering, Manufacturing

3D printed hierarchically-porous microlattice electrode materials for exceptionally high specific capacity and areal capacity lithium ion batteries

Mohammad Sadeq Saleh et al.

ADDITIVE MANUFACTURING (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Three-dimensional microarchitected materials and devices using nanoparticle assembly by pointwise spatial printing

Mohammad Sadeq Saleh et al.

SCIENCE ADVANCES (2017)

添加到收藏夹

Article Chemistry, Physical

Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes

Amir Azhari et al.

CARBON (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Aerosol-Jet printing of highly flexible and conductive graphene/silver patterns

Elahe Jabari et al.

MATERIALS LETTERS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printing of Graphene Aerogels

Qiangqiang Zhang et al.

SMALL (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Creation of Liquid Metal 3D Microstructures Using Dielectrophoresis

Shi-Yang Tang et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics

Ethan B. Secor et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Physical

Micro-scale aerosol-jet printing of graphene interconnects

Elahe Jabari et al.

CARBON (2015)

添加到收藏夹

Article Chemistry, Physical

The Importance of Interbands on the Interpretation of the Raman Spectrum of Graphene Oxide

Sergi Claramunt et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrarapid and ultrasensitive electrical detection of proteins in a three-dimensional biosensor with high capture efficiency

Bo-Yeong Kim et al.

NANOSCALE (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Highly Flexible and Conductive Printed Graphene for Wireless Wearable Communications Applications

Xianjun Huang et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient Inkjet Printing of Graphene

Jiantong Li et al.

ADVANCED MATERIALS (2013)

添加到收藏夹

Article Biophysics

Three-dimensional graphene micropillar based electrochemical sensor for phenol detection

Fei Liu et al.

BIOSENSORS & BIOELECTRONICS (2013)

添加到收藏夹

Review Automation & Control Systems

A review on 3D micro-additive manufacturing technologies

Mohammad Vaezi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

All-carbon-based field effect transistors fabricated by aerosol jet printing on flexible substrates

Rui Liu et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Probing the Nature of Defects in Graphene by Raman Spectroscopy

Axel Eckmann et al.

NANO LETTERS (2012)

添加到收藏夹

Article Engineering, Manufacturing

A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications

Jayanthi Parthasarathy et al.

Journal of Manufacturing Processes (2011)

添加到收藏夹

Article Engineering, Electrical & Electronic

Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication

Seung Hwan Ko et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Three-dimensional electrodes for dye-sensitized solar cells: synthesis of indium-tin-oxide nanowire arrays and ITO/TiO2 core-shell nanowire arrays by electrophoretic deposition

Hong-Wen Wang et al.

NANOTECHNOLOGY (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.