☆ 4.4 Article

Understanding tool chip interaction through experimental and numerical analysis during vibration assisted turning of AISI D3 steel

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives

Ahmed Mohamed Mahmoud Ibrahim et al.

Summary: Conventional flood lubrication techniques have negative impacts on the environment, health, and economy. Minimum quantity lubrication (MQL) has gained popularity as an effective and eco-friendly alternative. This study investigated the influence of rice bran oil (RBO) as lubrication fluid, with and without the addition of zinc oxide (ZnO) nanoparticles, on turning performance characteristics. The results showed that the addition of ZnO nanoparticles improved cutting force, tool wear, and surface roughness.

ALEXANDRIA ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Manufacturing

Experimental study on cutting force in ultrasonic vibration-assisted turning of 304 austenitic stainless steel

Yingshuai Xu et al.

Summary: This paper discusses the generation mechanism of cutting force in ultrasonic vibration assisted turning (UAT) and establishes a cutting force model based on the mechanism of UAT. A force measuring test system is designed and contrast experiments for stainless steel workpieces are conducted to analyze the influence of ultrasonic vibration and technological parameters on cutting force. It is found that ultrasonic vibration significantly reduces cutting force, and cutting parameters play a crucial role in controlling the machining process.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2021)

添加到收藏夹

Article Engineering, Mechanical

Empirical relationship between interfacial shear stress and contact pressure in micro- and macro-scale friction

Xin He et al.

Summary: This study investigates the empirical relationship between frictional shear stress and pressure in macro- and microscale contact and sliding. Two types of friction tests were conducted, with results confirming that interfacial shear stress due to kinetic friction is proportional to average contact pressure, further validating Amontons' law.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Review Automation & Control Systems

Finite element simulation of ultrasonic-assisted machining: a review

Mohammad Lotfi et al.

Summary: Simulation of ultrasonic-assisted machining is an interesting research field that has attracted researchers' interest in recent years. This method can improve the machining process, and simulation modeling technology can help analyze more details in a shorter time.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Effects of rake surface texture geometries on the performance of single-point cutting tools in hard turning of titanium alloy

Amal S. Siju et al.

Summary: The study investigates the effect of four different micro-textures on the rake surface of cutting tool inserts during hard turning of Ti-6Al-4V alloys. It specifically focuses on the influence of microtextures on the tool-chip contact length and chip morphology. The analysis compares the experimental tool-chip contact length with a new proposed model for textured inserts and quantitatively predicts the effectiveness of texture geometry in reducing cutting forces and friction during machining.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

CAD-Based 3D-FE Modelling of AISI-D3 Turning with Ceramic Tooling

Panagiotis Kyratsis et al.

Summary: This study presents the development of a 3D Finite Element model for turning AISI-D3 with ceramic tooling, using the Taguchi method to reduce simulation runs and examining the relationship between cutting parameters and cutting forces through statistical tools. The results show a strong correlation between experimental and simulated results, with a relative error below 10% for most tests, confirming the adequacy of the statistical model.

MACHINES (2021)

添加到收藏夹

Article Automation & Control Systems

On cutting temperatures in high and ultrahigh-speed machining

Guosheng Su et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Review Engineering, Manufacturing

A review of the chip breaking methods for continuous chips in turning

Bahattin Yilmaz et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Automation & Control Systems

Study of using cutting chip color to the tool wear prediction

Shao-Hsien Chen et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Review Engineering, Manufacturing

Review of ultrasonic vibration-assisted machining in advanced materials

Zhichao Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)

添加到收藏夹

Article Nuclear Science & Technology

The effect of cooling rates on carbide precipitate and microstructure of 9CR-1MO oxide dispersion strengthened(ODS) steel

Ki-Nam Jang et al.

NUCLEAR ENGINEERING AND TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Multi-objective optimization of cutting parameters during sustainable dry hard turning of AISI 52100 steel with newly develop HSN2-coated carbide insert

Anupam Alok et al.

MEASUREMENT (2019)

添加到收藏夹

Article Engineering, Manufacturing

Finite element modeling of ultrasonic-assisted turning: cutting force and heat generation

B. Gholamzadeh et al.

MACHINING SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Thermodynamics

Experimental study on chip shape in ultrasonic vibration-assisted turning of 304 austenitic stainless steel

Yingshuai Xu et al.

ADVANCES IN MECHANICAL ENGINEERING (2019)

添加到收藏夹

Article Engineering, Manufacturing

FE Modeling and Experimental Analysis of Residual Stresses in Vibration Assisted Turning of Ti6Al4V

Naresh Kumar Maroju et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2019)

添加到收藏夹

Article Automation & Control Systems

3D analysis of surface topography in vibratory turning

Mohammad Lotfi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Manufacturing

Cost-effective way of hard turning with newly developed HSN2-coated tool

Anupam Alok et al.

MATERIALS AND MANUFACTURING PROCESSES (2018)

添加到收藏夹

Article Engineering, Mechanical

Analytical modeling of tool-workpiece contact rate and experimental study in ultrasonic vibration-assisted milling of Ti-6Al-4V

Chenbing Ni et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Engineering, Mechanical

Comparative experimental research in turning of 304 austenitic stainless steel with and without ultrasonic vibration

Yingshuai Xu et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2017)

添加到收藏夹

Article Engineering, Manufacturing

Influences of chip serration on micro-topography of machined surface in high-speed cutting

Guosheng Su et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)

添加到收藏夹

Article Engineering, Manufacturing

Influence of machining parameters on forces and surface roughness during finish hard turning of EN 31 steel

Gaurav Bartarya et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)

添加到收藏夹

Article Acoustics

Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V

Sandip Patil et al.

ULTRASONICS (2014)

添加到收藏夹

Article Engineering, Mechanical

Experimental study of the chip morphology in turning hardened AISI D2 steel

Mohamed Baccar Mhamdi et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2013)

添加到收藏夹

Review Engineering, Manufacturing

A review of chatter vibration research in turning

M. Siddhpura et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)

添加到收藏夹

Article Engineering, Manufacturing

State of the art in hard turning

Gaurav Bartarya et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)

添加到收藏夹

Article Engineering, Manufacturing

Modeling of the Effect of Machining Parameters on Maximum Thickness of Cut in Ultrasonic Elliptical Vibration Cutting

Chandra Nath et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2011)

添加到收藏夹

Review Engineering, Multidisciplinary

Review of vibration-assisted machining

D. E. Brehl et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2008)

添加到收藏夹

Article Acoustics

Analysis of forces in ultrasonically assisted turning

N. Ahmed et al.

JOURNAL OF SOUND AND VIBRATION (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D finite element analysis of ultrasonically assisted turning

N. Ahmed et al.

COMPUTATIONAL MATERIALS SCIENCE (2007)

添加到收藏夹

Article Engineering, Manufacturing

The presence of carbon content in chips as an indicator of grinding temperature

L. Vedhavalli et al.

MATERIALS AND MANUFACTURING PROCESSES (2007)

添加到收藏夹

Article Engineering, Manufacturing

White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling

SS Bosheh et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)

添加到收藏夹

Article Engineering, Industrial

The assessment of plastic deformation in metal cutting

VP Astakhov et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Determination of optimum cutting parameters during machining of AISI 304 austenitic stainless steel

I Korkut et al.

MATERIALS & DESIGN (2004)

添加到收藏夹

Article Engineering, Manufacturing

Vibration-assisted precision machining of steel with PCD tools

M Zhou et al.

MATERIALS AND MANUFACTURING PROCESSES (2003)

添加到收藏夹

Article Mathematics, Applied

A finite element study of the effect of friction in orthogonal metal cutting

GQ Shi et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.