☆ 4.7 Article

Risk analysis for hazardous chemical vehicle-bridge transportation system: A dynamic Bayesian network model incorporating vehicle dynamics

RELIABILITY ENGINEERING & SYSTEM SAFETY (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Industrial

Risk coupling analysis of road transportation accidents of hazardous materials in complicated maritime environment

Jian Guo et al.

Summary: This paper studies the risk coupling problems in hazardous material transportation safety in coastal areas by analyzing 362 accidents. The results show that the risk of hazardous materials transportation has a gradually increasing trend with the increase of risk coupling factors. The risk coupling of driver factors and road environmental factors leads to a high probability of accidents.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2023)

添加到收藏夹

Article Engineering, Chemical

Risk assessment of coupling links in hazardous chemicals maritime transportation system

Laihao Ma et al.

Summary: This study proposes a hybrid method that integrates the Functional Resonance Analysis Method (FRAM), fuzzy set theory, and risk matrix to quantitatively assess the risks triggered by failure coupling links (CLs) between upstream and downstream functions in the hazardous chemicals maritime transportation system (HCMTS). The FRAM identified a total of 10 essential functions and 16 CLs involved in HCMTS. Fuzzy set theory was used to aggregate the weights of risk consequence and likelihood for CLs. A risk matrix with a continuous scale was utilized to assess and rank the CLs' risks. The results demonstrate that the CLs between the functions <Consignment of HCs> and <Protection> have higher risk indexes (RIs) in the whole chain of HCMTS.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2023)

添加到收藏夹

Article Engineering, Industrial

Hybrid Bayesian-Copula-based risk assessment for tall buildings subject to wind loads considering various uncertainties

Xiao-Wei Zheng et al.

Summary: This paper proposes a hybrid Bayesian-Copula method to assess wind-induced risk for tall buildings considering various uncertainties. The Bayes theorem is used to develop posterior probability distributions of unknown parameters in the marginal probability distribution of wind speed and direction as well as in the demand model for fragility estimates. The Copula technique is used to construct the joint probability model of wind speed and direction by linking their corresponding marginal distributions in a Bayesian-based framework. The application of this study shows that epistemic uncertainty has significant influences on total damage probability based on deformation and comfort. Compared to existing studies, the main contribution of this paper is the consideration of both epistemic uncertainty and aleatory uncertainty in the proposed Bayesian-based framework.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2023)

添加到收藏夹

Article Engineering, Chemical

A dynamic domino effect risk analysis model for rail transport of hazardous material

Esmaeil Zarei et al.

Summary: Rail transport of hazardous material is crucial in the supply chain, but poses severe risks, with the domino effect being a major concern. This study introduces a dynamic risk analysis model based on Dynamic Bayesian Network to analyze domino effects in RTHM, demonstrating its effectiveness through real-world testing with gasoline transportation.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2022)

添加到收藏夹

Article Engineering, Industrial

Minimisation of the probability of serious road accidents in the transport of dangerous goods

Mariusz Izdebski et al.

Summary: The article discusses how to determine the routes of vehicles transporting dangerous materials in order to minimize the probability of road accidents, presenting a model and case study based on a transport network in Poland. By adjusting theoretical distributions and using heuristic algorithms, effective routes for transporting dangerous goods with minimal accident probabilities were determined, providing valuable insights for solving complex problems in dangerous cargo transportation.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

添加到收藏夹

Article Engineering, Industrial

Risk coupling analysis of subsea blowout accidents based on dynamic Bayesian network and NK model

Zengkai Liu et al.

Summary: This paper proposes a novel method to quantify risk coupling of subsea blowout accidents based on DBN and NK model. By classifying and analyzing risk factors, a developed DBN model can describe the dynamic characteristics of risk evolution and risk coupling of the accidents. Sensitive analysis and quantification of risk factors' influences can be performed with this model.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

添加到收藏夹

Article Engineering, Industrial

A novel vulnerability model considering synergistic effect of fire and overpressure in chemical processing facilities

Long Ding et al.

Summary: A novel vulnerability model called the fire and explosion synergistic effect model (FESEM) is proposed to estimate time to failure and escalation probability of equipment under spatial-temporal synergistic of heat radiation and overpressure. The study demonstrates significant synergistic effects and discusses parameters influencing time to failure and escalation probability, serving as an essential guide for preventing and controlling domino effects.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

添加到收藏夹

Review Engineering, Civil

Risk assessment of hazardous materials transportation: A review of research progress in the last thirty years

Jian Guo et al.

Summary: Hazardous materials transportation accidents have been occurring frequently, leading to significant casualties and property losses. This review analyzes the research progress of risk assessment of hazardous materials transportation from 1991 to 2020. The results show that the research on risk assessment models for road transportation is comprehensive, while that for railway and intermodal transportation is insufficient. The conditional value-at-risk model provides a flexible decision-making framework. The conclusion that the risk of railway and multimodal transportation of hazardous materials is lower than that of road transportation is not universally applicable. The advantages of different transportation modes can be combined to improve the system's capabilities. The review identifies existing trends, research gaps, and future research directions.

JOURNAL OF TRAFFIC AND TRANSPORTATION ENGINEERING-ENGLISH EDITION (2022)

添加到收藏夹

Article Engineering, Industrial

Quantitative assessment of leakage orifices within gas pipelines using a Bayesian network

Cuiwei Liu et al.

Summary: This study presents a probabilistic simulation of leakage orifice diameters of gas pipelines based on a Bayesian network model, which can precisely assess the leakage orifice diameter and be further applied to leakage rate estimation in actual situations.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

添加到收藏夹

Article Engineering, Industrial

A novel fuzzy dynamic Bayesian network for dynamic risk assessment and uncertainty propagation quantification in uncertainty environment

Xiaoxue Guo et al.

Summary: Risk assessment is crucial in safety engineering, and conventional methods may have limitations in handling time dependence and data uncertainty. This study introduces a novel fuzzy dynamic Bayesian network (FDBN) methodology to improve dynamic risk assessment by incorporating fuzzy set theory and expert elicitation to quantify uncertainty propagation over time under data uncertainty. The comparison with traditional methods shows the credibility and robustness of the proposed methodology.

SAFETY SCIENCE (2021)

添加到收藏夹

Article Engineering, Industrial

A Bayesian Network Approach for Modeling Dependent Seismic Failures in a Nuclear Power Plant Probabilistic Risk Assessment

Jonathan DeJesus Segarra et al.

Summary: The importance of modeling the dependency between seismic failures of multiple components in a nuclear power plant probabilistic risk assessment has been discussed since the 1980s. The proposed Bayesian network approach provides better results in staying within the lower and upper bounds of system fragility compared to the Reed-McCann method, and it performs similarly to the First-Order Reliability Method and Monte Carlo simulation.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2021)

添加到收藏夹

Article Engineering, Environmental

Real-time risk analysis of road tanker containing flammable liquid based on fuzzy Bayesian network

Yuntao Li et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

添加到收藏夹

Article Engineering, Industrial

Probabilistic framework to evaluate the resilience of engineering systems using Bayesian and dynamic Bayesian networks

Omar Kammouh et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

添加到收藏夹

Article Engineering, Industrial

Railway dangerous goods transportation system risk analysis: An Interpretive Structural Modeling and Bayesian Network combining approach

Wencheng Huang et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

添加到收藏夹

Article Engineering, Industrial

Network theory-based accident scenario analysis for hazardous material transport: A case study of liquefied petroleum gas transport in japan

H. Noguchi et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

添加到收藏夹

Article Engineering, Industrial

Safety analysis of plugging and abandonment of oil and gas wells in uncertain conditions with limited data

Ahmed O. Babaleye et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2019)

添加到收藏夹

Article Engineering, Chemical

Safety analysis of process systems using Fuzzy Bayesian Network (FBN)

Esmaeil Zarei et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2019)

添加到收藏夹

Article Statistics & Probability

Dynamic Bayesian network inferencing for non-homogeneous complex systems

Paul P. -Y. Wu et al.

JOURNAL OF THE ROYAL STATISTICAL SOCIETY SERIES C-APPLIED STATISTICS (2018)

添加到收藏夹

Article Engineering, Marine

Marine transportation risk assessment using Bayesian Network: Application to Arctic waters

Al-Amin Baksh et al.

OCEAN ENGINEERING (2018)

添加到收藏夹

Article Engineering, Industrial

Dynamic availability assessment of safety critical systems using a dynamic Bayesian network

Md. Tanjin Amin et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)

添加到收藏夹

Article Engineering, Industrial

Quantitative risk assessment of freeway crash casualty using high-resolution traffic data

Chengcheng Xu et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)

添加到收藏夹

Article Engineering, Industrial

Using Bayesian network for safety risk analysis of diaphragm wall deflection based on field data

Ying Zhou et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)

添加到收藏夹

Article Engineering, Industrial

A dynamic and quantitative risk assessment method with uncertainties for offshore managed pressure drilling phases

Laibin Zhang et al.

SAFETY SCIENCE (2018)

添加到收藏夹

Article Engineering, Civil

Accident-Cause-Specific Risk Analysis of Rail Transport of Hazardous Materials

Xiang Liu et al.

TRANSPORTATION RESEARCH RECORD (2018)

添加到收藏夹

Article Engineering, Chemical

Risk Assessment on Chemical Plants by the Method of Safety Checklist Analysis

Zhang Xiaoliang et al.

PROCESS SAFETY PROGRESS (2017)

添加到收藏夹

Article Public, Environmental & Occupational Health

Quantitative Risk Analysis on the Transport of Dangerous Goods Through a Bi-Directional Road Tunnel

Ciro Caliendo et al.

RISK ANALYSIS (2017)

添加到收藏夹

Article Engineering, Chemical

Dynamic Failure Analysis of Process Systems Using Principal Component Analysis and Bayesian Network

Sunday A. Adedigba et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

添加到收藏夹

Article Engineering, Industrial

Corrosion induced failure analysis of subsea pipelines

Yongsheng Yang et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2017)

添加到收藏夹

Article Engineering, Industrial

Application of dynamic Bayesian network to performance assessment of fire protection systems during domino effects

Nima Khakzad et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2017)

添加到收藏夹

Article Environmental Studies

Modelling uncertainty in sustainable integrated logistics using Fuzzy-TISM

Mahamaya Mohanty et al.

TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT (2017)

添加到收藏夹

Article Engineering, Civil

Vulnerability assessment for the hazards of crosswinds when vehicles cross a bridge deck

Se-Jin Kim et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2016)

添加到收藏夹

Article Energy & Fuels

A DBN-based risk assessment model for prediction and diagnosis of offshore drilling incidents

Shengnan Wu et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2016)

添加到收藏夹

Article Engineering, Environmental

Methods and models in process safety and risk management: Past, present and future

Faisal Khan et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2015)

添加到收藏夹

Article Engineering, Industrial

Risk assessment of petroleum product transportation by road: A framework for regulatory improvement

Ambisisi Ambituuni et al.

SAFETY SCIENCE (2015)

添加到收藏夹

Article Engineering, Environmental

Dynamic safety analysis of process systems by mapping bow-tie into Bayesian network

Nima Khakzad et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2013)

添加到收藏夹

Article Engineering, Environmental

A Bayesian approach to construct bow tie diagrams for risk evaluation

Ahmed Badreddine et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2013)

添加到收藏夹

Article Transportation Science & Technology

Routing hazardous materials on time-dependent networks using conditional value-at-risk

Iakovos Toumazis et al.

TRANSPORTATION RESEARCH PART C-EMERGING TECHNOLOGIES (2013)

添加到收藏夹

Article Engineering, Industrial

Safety analysis in process facilities: Comparison of fault tree and Bayesian network approaches

Nima Khakzad et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2011)

添加到收藏夹

Article Public, Environmental & Occupational Health

Fault and Event Tree Analyses for Process Systems Risk Analysis: Uncertainty Handling Formulations

Refaul Ferdous et al.

RISK ANALYSIS (2011)

添加到收藏夹

Article Engineering, Industrial

The use of Bayesian network modelling for maintenance planning in a manufacturing industry

B. Jones et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2010)

添加到收藏夹

Article Engineering, Environmental

Risk reduction in road and rail LPG transportation by passive fire protection

Nicola Paltrinieri et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

添加到收藏夹

Article Engineering, Environmental

Utilization of accident databases and fuzzy sets to estimate frequency of HazMat transport accidents

Yuanhua Qiao et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

添加到收藏夹

Article Engineering, Environmental

Handling data uncertainties in event tree analysis

Refaul Ferdous et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2009)

添加到收藏夹

Article Public, Environmental & Occupational Health

A New Approach to Hazardous Materials Transportation Risk Analysis: Decision Modeling to Identify Critical Variables

Renee M. Clark et al.

RISK ANALYSIS (2009)

添加到收藏夹

Article Ergonomics

Cross-analysis of hazmat road accidents using multiple databases

Martin Trepanier et al.

ACCIDENT ANALYSIS AND PREVENTION (2009)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A probabilistic framework for Bayesian adaptive forecasting of project progress

Paolo Gardoni et al.

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2007)

添加到收藏夹

Article Business

Modelling and assessment of critical risks in BOT road projects

A. V. Thomas et al.

CONSTRUCTION MANAGEMENT AND ECONOMICS (2006)

添加到收藏夹

Article Engineering, Industrial

Identification of reference accident scenarios in SEVESO establishments

C Delvosalle et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2005)

添加到收藏夹

Article Engineering, Chemical

Dangerous good transportation by road:: from risk analysis to emergency planning

B Fabiano et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2005)

添加到收藏夹

Article Operations Research & Management Science

Designing a road network for hazardous materials transportation

BY Kara et al.

TRANSPORTATION SCIENCE (2004)

添加到收藏夹

Article Engineering, Civil

Framework of vehicle-bridge-wind dynamic analysis

CS Cai et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2004)

添加到收藏夹

Article Engineering, Civil

Dynamic analysis of coupled road vehicle and cable-stayed bridge systems under turbulent wind

YL Xu et al.

ENGINEERING STRUCTURES (2003)

添加到收藏夹

Article Engineering, Chemical

Major hazards analysis: An improved method for process hazard analysis

P Baybutt

PROCESS SAFETY PROGRESS (2003)

添加到收藏夹

Article Engineering, Chemical

A criterion for developing credible accident scenarios for risk assessment

FI Khan et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2002)

添加到收藏夹

Article Engineering, Chemical

Design and evaluation of safety measures using a newly proposed methodology SCAP

FI Khan et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.