☆ 4.8 Article

A presodiation strategy to extend the cycle life of iron phosphate sodium-ion full cell

JOURNAL OF POWER SOURCES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Boosting the capability capability of Li2C2O4 as cathode pre-lithiation additive for lithium-ion batteries

Guxin Huang et al.

Summary: In this study, the pre-lithiation performance of Li2C2O4 as a cathode additive was greatly improved by optimizing the combination of conductive additives and catalysts, reducing the particle size, and designing a bilayer electrode. By lowering the delithiation potential, the capacity of Li2C2O4 was increased to its theoretical value and effectively applied to a hard carbon anode.

NANO RESEARCH (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Entropy Doping Boosts Ion/Electronic Transport of Na4Fe3(PO4)2(P2O7)/C Cathode for Superior Performance Sodium-Ion Batteries

Xiaochen Ge et al.

Summary: The Fe-based mixed phosphate cathodes for Na-ion batteries exhibit improved sodium storage capability through the introduction of high-entropy doping, which enhances the electronic and ionic conductivity. The designed NFPP-HE cathode achieves high capacity and excellent cyclability due to the optimized Na+ migration path and energy barrier.

SMALL (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improved performance of the NaFePO4/Hardcarbon sodium-ion full cell

S. Altundag et al.

Summary: Chronoamperometry and galvanostatic procedures were used to prepare NaFePO4 cathodes by LiFePO4-based ion exchange approach. The structural and electrochemical properties of the obtained materials were investigated. XRD, XPS and EDX-dot mapping analyses confirmed the successful replacement of Na-ions with Li-ions. The diffusion rate of Na-ions in the cell was found to be higher at higher temperatures. The first capacities for C/10 and 1C rates at room temperature were 140mAh/g and 60mAh/g, respectively.

VACUUM (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mg-Doped Na4Fe3(PO4)2(P2O7)/C Composite with Enhanced Intercalation Pseudocapacitance for Ultra-Stable and High-Rate Sodium-Ion Storage

Fangyu Xiong et al.

Summary: Mg-doped NFPP/C composites are proposed as cathode materials for sodium-ion batteries, showing improved electrochemical performance in terms of rate capability and cycling stability.

ADVANCED FUNCTIONAL MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dual-Function Presodiation with Sodium Diphenyl Ketone towards Ultra-stable Hard Carbon Anodes for Sodium-Ion Batteries

Hengyi Fang et al.

Summary: In this study, sodium diphenyl ketone (Na-DK) was used to presodiate the hard carbon (HC) anode for sodium-ion batteries, improving its initial Coulombic efficiency and stability. Na-DK achieved dual-function presodiation by compensating the irreversible sodium uptake at oxygen-containing functional groups and reacting with carbon defects in HC. The resulting sodium induced a robust sodium fluoride (NaF)-rich solid electrolyte interphase (SEI) on HC, promoting interfacial reaction kinetics and stable sodium insertion and extraction. This work demonstrated high capacity retention of approximately 100% and 82.4% after 6800 cycles for presodiated HC (pHC) and full cells with Na3V2(PO4)3 cathodes, respectively. It provides valuable insights into chemical presodiation and offers a new strategy for highly stable sodium-ion batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

添加到收藏夹

Article Engineering, Environmental

Robust NASICON-type iron-based Na4Fe3(PO4)2(P2O7) cathode for high temperature sodium-ion batteries

Jinqiang Gao et al.

Summary: Iron-based mixed phosphates sodium ion batteries (SIBs) with a mesoporous sponge-like structure Na4Fe3(PO4)(2)(P2O7) (NFPP) encapsulated in a carbon layer and cross-linked graphene nanosheets (NFPP@C@rGO) achieved fast charging and highly stable sodium ion half/full cells in a wide temperature range. The cathode exhibited superior long-lasting cycling stability, outstanding thermal stability, and excellent electrochemical performance, making it a potential candidate for advanced energy storage systems.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dual-strategy modification on P2-Na0.67Ni0.33Mn0.67O2 realizes stable high-voltage cathode and high energy density full cell for sodium-ion batteries

Guanglin Wan et al.

Summary: A dual strategy of Mg2+ doping and ZrO2 surface modification is proposed to address the issues of phase transition and side reactions for P2-type Na0.67Ni0.33Mn0.67O2. This strategy improves the cycling stability and rate performance by enhancing structural and interfacial stabilities.

SUSMAT (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ultra-Low-Dose Pre-Metallation Strategy Served for Commercial Metal-Ion Capacitors

Zirui Song et al.

Summary: The sacrificial pre-metallation strategy has been investigated to improve the performance of full metal ion capacitors (MICs). By regulating the interface and electron groups, the decomposition energy and polarization phenomenon can be reduced, resulting in a lower practical decomposition potential. Experimental results showed that the energy density and cycling stability of full sodium ion capacitors were significantly improved under a ultra-low dosage pre-sodiation reagent. The decomposition mechanism of sacrificial compound and its influence on MICs system were revealed, and this strategy was also successfully applied to lithium/potassium ion capacitors.

NANO-MICRO LETTERS (2022)

添加到收藏夹

Article Electrochemistry

Pre-Lithiation Strategies and Energy Density Theory of Lithium-Ion and Beyond Lithium-Ion Batteries

Jim P. Zheng et al.

Summary: Pre-lithiation is an effective method to overcome initial capacity loss in high-capacity electrodes and has the potential to be used in beyond-conventional lithium-ion batteries. This article focuses on two types of pre-lithiation methods and provides theoretical formulas to predict the specific energy of lithium-ion batteries based on measurable parameters.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2022)

添加到收藏夹

Article Energy & Fuels

Interfacial engineering to achieve an energy density of over 200 Wh kg-1 in sodium batteries

Yuqi Li et al.

Summary: This study presents an initial anode-free sodium battery with an energy density exceeding 200 Wh kg(-1), showcasing the potential for sodium batteries to rival lithium-ion battery performance. Through innovative design and interface chemistry, the cycling lifetime of the sodium battery reaches an impressive 260 cycles without applying additional pressure, providing insights for further development of high-performance sodium batteries.

NATURE ENERGY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Step-by-step desolvation enables high-rate and ultra-stable sodium storage in hard carbon anodes

Ziyang Lu et al.

Summary: The desolvation process plays a crucial role in the diffusion kinetics of sodium ions and the formation of a solid electrolyte interface (SEI). Researchers have found that a 3A zeolite molecular sieve film on the hard carbon anode can effectively reduce the activation energy of the direct desolvation process, leading to improved performance.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

High energy density Na-metal batteries enabled by a tailored carbonate-based electrolyte

Jiawei Chen et al.

Summary: Electrolyte plays a critical role in high-energy sodium metal batteries. In this study, a tailored carbonate-based electrolyte with lithium difluorobis(oxalato) phosphate (LiDFBOP) as an additive was fabricated to achieve stable electrode reactions and control electrolyte stability. The optimized electrolyte demonstrated improved coulombic efficiency, prolonged battery life, high energy density, and cycling stability for high-energy sodium metal chemistries.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Prelithiation/Presodiation Techniques for Advanced Electrochemical Energy Storage Systems: Concepts, Applications, and Perspectives

Kangyu Zou et al.

Summary: This review highlights the significance and applications of Prelithiation / presodiation techniques in EES systems. Various methods have been successfully developed, leading to revolutionary advancements in EES systems. The article discusses the characteristics of different strategies, future directions, and safety considerations.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Realizing Improved Sodium-Ion Storage by Introducing Carbonyl Groups and Closed Micropores into a Biomass-Derived Hard Carbon Anode

Wentao Deng et al.

Summary: This study introduces precise carbonyl groups and closed micropores into biomass-derived hard carbon to enhance sodium-ion storage performance, demonstrating higher capability in diglyme-based electrolytes. The hard carbon exhibits high initial Coulombic efficiency, large reversible capacity, and ultra-long cycling stability, making it a promising material for sodium-ion batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Engineering Solid Electrolyte Interface at Nano-Scale for High-Performance Hard Carbon in Sodium-Ion Batteries

Mengying Ma et al.

Summary: Regulating the structure and chemical properties of the solid electrolyte interface (SEI) on electrode materials, specifically using hard carbon as a platform material, can enable fast and stable Na+ storage in Na-ion batteries. The combination of a layer-by-layer SEI structure and a pseudo-SEI layer can improve the energy storage performance of electrode materials.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Additive-Free Self-Presodiation Strategy for High-Performance Na-Ion Batteries

Feixiang Ding et al.

Summary: This study introduces an additive-free self-presodiation strategy to improve the performance of sodium-ion batteries by creating lattice-coherent cathodes through quenching treatment, resulting in higher energy density and capacity retention.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

From Micropores to Ultra-micropores inside Hard Carbon: Toward Enhanced Capacity in Room-/Low-Temperature Sodium-Ion Storage

Jinlin Yang et al.

Summary: The pore structure of hard carbon plays a crucial role in the electrochemical properties of sodium-ion batteries. A new molten diffusion-carbonization method was proposed to transform micropores into ultra-micropores, leading to an enhanced capacity and temperature endurance for the carbon anode. The ultra-micropores provide extra Na+ storage sites, contributing to the improved capacity, showing potential for high-performance SIBs.

NANO-MICRO LETTERS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hollow-Sphere-Structured Na4Fe3(PO4)2(P2O7)/C as a Cathode Material for Sodium-Ion Batteries

Li-ming Zhang et al.

Summary: A carbon-coated hollow-sphere-structured Na4Fe3(PO4)(2)(P2O7) powder was synthesized by a scalable spray drying route, showing high capacity and stability. The material exhibited excellent capacity and cyclic performance at different rates, making it a promising cathode electrode for sodium-ion batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

All-Climate Iron-Based Sodium-Ion Full Cell for Energy Storage

Yongjie Cao et al.

Summary: A novel carbon-coated iron-based borate anode material shows excellent performance in sodium-ion batteries with high reversible specific capacity and good cycling stability, capable of operating over a wide temperature range.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Engineering, Environmental

Insight into pre-sodiation in Na3V2(PO4)2F3/C @ hard carbon full cells for promoting the development of sodium-ion battery

Yuqiang Pi et al.

Summary: Sodium-ion battery is gaining attention in large-scale energy storage systems due to its lower cost compared to lithium-ion batteries. Research demonstrates that a specific full cell composition with a spray-dried NVPF/C cathode and pre-sodiated HC anode shows superior energy storage capability, power performance, and cycling life. The outstanding battery performance is attributed to the electroactivity Na+ in HC maximizing the scavenger effect and forming a stable SEI, with the degree of HC pre-sodiation impacting the battery performance. These findings provide insights into electrode design strategy and facilitate sodium-ion technology development.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Chemical

Pre-sodiation strategy for superior sodium storage batteries

Yongkai Xu et al.

Summary: The study found that pretreating sodium can improve the initial coulombic efficiency and cycle stability of sodium metal batteries, and the NaFeS2@C material exhibits ultrahigh initial coulombic efficiency and remarkable capacity in the battery.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2021)

添加到收藏夹

Review Electrochemistry

Recent advances on pre-sodiation in sodium-ion capacitors: A mini review

Taoqiu Zhang et al.

Summary: Rechargeable sodium-based energy storage devices have high abundance of sodium resources and sodium-ion capacitors are expected to supplement lithium-based energy storage devices. However, the issues of the absence of a sodium source in electrode materials, the formation of a solid electrolyte interface (SEI) and the loss of sodium ions during long-term cycles can be fatal. The effective approach is to perform the pre-sodiation process.

ELECTROCHEMISTRY COMMUNICATIONS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Chemically Presodiated Hard Carbon Anodes with Enhanced Initial Coulombic Efficiencies for High-Energy Sodium Ion Batteries

Mengchuang Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Stable Na3Fe2(PO4)3@Hard Carbon Sodium-Ion Full Cell for Low-Cost Energy Storage

Yongjie Cao et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Efficiency Cathode Sodium Compensation for Sodium-Ion Batteries

Yu-Bin Niu et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Review Chemistry, Physical

Fluorophosphates: Next Generation Cathode Materials for Rechargeable Batteries

Lalit Sharma et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

A new pre-sodiation additive for sodium-ion batteries

Jae Hyeon Jo et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

A simple pre-sodiation strategy to improve the performance and energy density of sodium ion batteries with Na4V2(PO4)3 as the cathode material

Shahid Mirza et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Physical

Extended low-voltage plateau capacity of hard carbon spheres anode for sodium ion batteries

Xiang Zhang et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Rational design of layered oxide materials for sodium-ion batteries

Chenglong Zhao et al.

SCIENCE (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Polyanion-type cathode materials for sodium-ion batteries

Ting Jin et al.

CHEMICAL SOCIETY REVIEWS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

NASICON-type air-stable and all-climate cathode for sodium-ion batteries with low cost and high-power density

Mingzhe Chen et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Review Chemistry, Physical

Understanding and improving the initial Coulombic efficiency of high-capacity anode materials for practical sodium ion batteries

Hanna He et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Controllable charge capacity using a black additive for high-energy-density sodium-ion batteries

Chang-Heum Jo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A safe, convenient liquid phase pre-sodiation method for titanium-based SIB materials

Yang Cao et al.

CHEMICAL COMMUNICATIONS (2019)

添加到收藏夹

Review Chemistry, Physical

Polyanionic Insertion Materials for Sodium-Ion Batteries

Prabeer Barpanda et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

NaN3 addition, a strategy to overcome the problem of sodium deficiency in P2-Na0.67[Fe0.5Mn0.5]O2 cathode for sodium-ion battery

Jaione Martinez De Ilarduya et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Chemistry, Physical

Dual Stabilization and Sacrificial Effect of Na2CO3 for Increasing Capacities of Na-Ion Cells Based on P2-NaxMO2 Electrodes

Mariyappan Sathiya et al.

CHEMISTRY OF MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Pre-Lithiation of Li(Ni1-x-yMnxCoy)O2 Materials Enabling Enhancement of Performance for Li-Ion Battery

Zhongzhen Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Chemistry, Physical

The relation between the structure and electrochemical performance of sodiated iron phosphate in sodium-ion batteries

Yao Liu et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Research Development on Sodium-Ion Batteries

Naoaki Yabuuchi et al.

CHEMICAL REVIEWS (2014)

添加到收藏夹

Article Electrochemistry

Sacrificial salts: Compensating the initial charge irreversibility in lithium batteries

Devaraj Shanmukaraj et al.

ELECTROCHEMISTRY COMMUNICATIONS (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.