4.7 Article

The role of stress release in shaping iron whisker morphology during oxygen removal process

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Chemical

Effect of reducing atmosphere on the direct reduction of iron oxides pellets

Pasquale Cavaliere et al.

Summary: The paper studies the direct reduction kinetics of industrial iron oxide pellets using different compositions of hydrogen and carbon monoxide. The reduction behavior is examined based on time to reduction, rate of reduction, and kinetics constant. The results are analyzed using a multi-objective optimization tool (modeFrontier) to determine the importance of each parameter on the reduction behavior, and to identify the factors influencing the reduction process.

POWDER TECHNOLOGY (2023)

Article Nanoscience & Nanotechnology

Hierarchical nature of hydrogen-based direct reduction of iron oxides

Yan Ma et al.

Summary: Fossil-free ironmaking is crucial for reducing CO2 emissions in the steel industry. Hydrogen-based direct reduction (HyDR) is a promising green iron-making solution. However, the underlying mechanisms of this process, involving complex interactions of chemical, physical, and mechanical phenomena, and the formation of various defects, are not well understood.

SCRIPTA MATERIALIA (2022)

Article Materials Science, Multidisciplinary

Chemo-mechanical phase-field modeling of iron oxide reduction with hydrogen

Yang Bai et al.

Summary: This study developed a model that explores the interaction between phase transformation, chemical reaction, species diffusion, deformation, and microstructure evolution. The simulations revealed that elastic stress had a negative impact on phase transformations, but high elastic stress could accelerate the transformation and result in a higher reduction degree. The model successfully predicted the observed microstructure evolution in experiments and found that filled pores with water vapor could influence the local reaction atmosphere and dynamics.

ACTA MATERIALIA (2022)

Article Materials Science, Multidisciplinary

Tin whisker growth from titanium-tin intermetallic and the mechanism

Zhihua Tian et al.

Summary: This research investigates the growth of tin whiskers from a Ti6Sn5 intermetallic and finds that they share similar characteristics with whiskers found on platings or solder joints, but they grow more and faster with finer diameters. The study analyzes the growth mechanism using experimental and computational methods, proposing a diffusion-based growth model. It reveals the critical role of the intermetallic substrate in the whiskering phenomenon and provides new insights for comprehensive understanding of whisker growth mechanisms. Additionally, the abundant and rapid growth of tin whiskers also offers a new method for preparing one-dimensional metallic materials.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

Insights into the dual-roles of alloying elements in the growth of Sn whiskers

Yan Zhang et al.

Summary: This study investigated the growth of Sn whiskers from Ti2SnC/Sn-X (X = Sn, Bi, Pb, Ga) samples to understand the role of alloying elements on whiskering behaviors. It was found that the mobility of source Sn atoms plays a critical role in governing the growth rate, with the aggregation of which lowering the enthalpy and promoting whisker growth. The migration of source Sn atoms to the whisker root was spontaneous, making whisker growth intrinsic to the materials, with external factors like compressive stress or oxidation facilitating the whiskering process by enhancing the mobility of source Sn atoms.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Chemistry, Physical

Intermetallics-induced directional growth of Sn whiskers in Sn-3.5Ag coating on Al substrate

Shuang Tian et al.

Summary: The growth behavior of Sn whiskers was found to be connected to the interfacial gamma-Ag2Al IMCs at the Sn-3.5Ag/Al interface. Aging treatment showed consistent growth direction of Sn whiskers. Ag atoms diffused into Sn sub-grain boundaries and formed gamma-Ag2Al IMCs, influencing the growth rate.

APPLIED SURFACE SCIENCE (2021)

Article Electrochemistry

Direct Observation and Quantitative Analysis of Lithium Dendrite Growth by In Situ Transmission Electron Microscopy

Megan Diaz et al.

Summary: A unique in situ TEM technique was developed to evaluate mechanical stress during lithium dendrite growth, allowing direct observation and quantification of the process. The study observed nano-sized lithium dendrite nucleation/growth and noted a transition in growth mode. The obtained fundamental information provides valuable insights for designing robust solid electrolytes for all-solid-state lithium batteries.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Energy & Fuels

Pressure-tailored lithium deposition and dissolution in lithium metal batteries

Chengcheng Fang et al.

Summary: This study presents a high-density Li deposition technique achieved by controlling uniaxial stack pressure to improve the performance of lithium metal batteries, along with proposing a Li morphology testing protocol to maintain the ideal Li deposition morphology. The critical role of stack pressure on Li nucleation, growth, and dissolution processes is elucidated, highlighting the importance of precise control of Li deposition and dissolution.

NATURE ENERGY (2021)

Article Materials Science, Multidisciplinary

Sn and Bi whisker growth from SAC0307-Mn07 and SAC0307-Bi1-Mn07 ultra-thin film layers

Balazs Illes et al.

Summary: The study found that the addition of bismuth to the SAC0307 alloy can increase the stress relaxation ability of the ultra-thin film layer, delaying the formation of whiskers. The SAC0307-Bi1-Mn07 alloy can completely suppress the formation of filament-type whiskers, reducing reliability issues in microelectronics. Moreover, a unique phenomenon was observed where the SAC0307-Bi1-Mn07 layer mainly produced Bi-Sn whisker couples.

VACUUM (2021)

Review Chemistry, Physical

Utilization and impacts of hydrogen in the ironmaking processes: A review from lab-scale basics to industrial practices

Kaihui Ma et al.

Summary: This review systematically studies the utilization and impact of hydrogen in ironmaking processes, including the assisted reduction mechanism and kinetics, the impact on reduction behaviors, the performance prediction in ironmaking processes, and the applications of H-2 in different ironmaking processes before discussing the outlook of H-2 utilization.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Multidisciplinary Sciences

Biomolecule-guided cation regulation for dendrite-free metal anodes

Jian Zhi et al.

SCIENCE ADVANCES (2020)

Article Chemistry, Multidisciplinary

Thermodynamic origin of dendrite growth in metal anode batteries

Arthur Hagopian et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Multidisciplinary Sciences

Conductivity and lithiophilicity gradients guide lithium deposition to mitigate short circuits

Jun Pu et al.

NATURE COMMUNICATIONS (2019)

Article Materials Science, Multidisciplinary

Nucleation and Growth of Iron Whiskers during Gaseous Reduction of Hematite Iron Ore Fines

Lei Guo et al.

METALS (2019)

Article Nanoscience & Nanotechnology

Origin of lithium whisker formation and growth under stress

Yang He et al.

NATURE NANOTECHNOLOGY (2019)

Article Chemistry, Multidisciplinary

Long-life and deeply rechargeable aqueous Zn anodes enabled by a multifunctional brightener-inspired interphase

Zhiming Zhao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Materials Science, Multidisciplinary

Whiskers growth in thin passivated Au films

Anna Kosinova et al.

ACTA MATERIALIA (2018)

Article Engineering, Chemical

Self-agglomeration mechanism of iron nanoparticles in a fluidized bed

Jun Li et al.

CHEMICAL ENGINEERING SCIENCE (2018)

Article Chemistry, Multidisciplinary

Microscopic behavior and metallic iron morphology from reduction of iron oxide by CO/H-2 in a fluidized bed

Feng Lu et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2018)

Article Engineering, Chemical

The adsorption behaviors of CO and H2 on FeO surface: A density functional theory study

Hong Zhong et al.

POWDER TECHNOLOGY (2016)

Review Materials Science, Multidisciplinary

Spontaneous Growth of Metal Whiskers on Surfaces of Solids: A Review

Peigen Zhang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)

Article Engineering, Chemical

Swelling behavior of iron ore pellet reduced by H2-CO mixtures

Lingyun Yi et al.

POWDER TECHNOLOGY (2015)

Article Materials Science, Multidisciplinary

Insight of Iron Whisker Sticking Mechanism from Iron Atom Diffusion and Calculation of Solid Bridge Radius

Xuzhong Gong et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)

Article Materials Science, Multidisciplinary

Copper-oxide whisker growth on tin-copper alloy coatings caused by the corrosion of Cu6Sn5 intermetallics

Barbara Horvath et al.

JOURNAL OF MATERIALS SCIENCE (2013)

Article Materials Science, Multidisciplinary

In-situ observation of Fe0.94O reduction at high temperature with the use of optical microscopy

Toru Yamashita et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2007)