☆ 4.7 Article

A novel bearing fault diagnosis approach using the Gaussian mixture model and the weighted principal component analysis

RELIABILITY ENGINEERING & SYSTEM SAFETY (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Industrial

Online bearing fault diagnosis using numerical simulation models and machine learning classifications

Hui Wang et al.

Summary: Digital twin is the embodiment of the most advanced achievements of the current simulation technology theory development and the direction of intelligent development in the future. However, it is a great challenge to really integrate it into practical project application. Motivated by DT, an application method combining numerical simulation model and machine learning classification is proposed to show the advantages of digital twin.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2023)

添加到收藏夹

Article Engineering, Industrial

Second-order transient-extracting S transform for fault feature extraction in rolling bearings

Yi Liu et al.

Summary: Intelligent fault diagnosis methods are effective in ensuring the safety and reliability of key parts of rotating machinery. However, the lack of data during equipment acceptance period and the assumption of high data quality affect the reliability of results. To address these issues, a time-frequency-based method is introduced to analyze impulse components based on fault features. An accurate time-frequency analysis method named the second-order transient-extracting S-transform is proposed to overcome the influence of uncertain parameters. It produces a highly concentrated time-frequency representation and demonstrates higher accuracy in feature detection compared to other methods.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2023)

添加到收藏夹

Article Engineering, Industrial

Multi-sensor data fusion for rotating machinery fault detection using improved cyclic spectral covariance matrix and motor current signal analysis

Junchao Guo et al.

Summary: This paper proposes a novel method for rotating machinery fault detection, which achieves multi-sensor data fusion using improved cyclic spectral covariance matrix (ICSCM) and motor current signal analysis. The proposed method adaptively acquires multi-sensor mode components and constructs ICSCM using sample entropy to preserve the interaction relationship between different sensors. The ICSCM is then incorporated into an extreme learning machine classifier for fault type identification. The proposed method has achieved satisfactory results and more reliable diagnosis accuracy than other state-of-the-art algorithms in rotating machinery fault detection.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2023)

添加到收藏夹

Article Engineering, Industrial

A Tensor-based domain alignment method for intelligent fault diagnosis of rolling bearing in rotating machinery

Zhao-Hua Liu et al.

Summary: This paper proposes a novel tensor-based domain adaptation method for fault diagnosis of rolling bearings. The method integrates time domain signals, frequency domain signals, and Hilbert marginal spectrum into a third-order tensor model. It uses tensor decomposition and alignment matrices to achieve adaptive learning. Experimental results show the satisfactory performance of the proposed method.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2023)

添加到收藏夹

Article Engineering, Mechanical

A physics-informed feature weighting method for bearing fault diagnostics

Hao Lu et al.

Summary: Intelligent bearing diagnostics have become increasingly popular in recent years. However, most diagnostic methods are developed under the assumption that training and test data sets are collected under the same working conditions, which is rarely the case in practice. To address this challenge, this paper proposes a physics-informed feature weighting method for bearing diagnostics. First, a signal processing step is used to extract discriminative features robust to bearing speed variation. Then, a novel feature weighting layer assigns higher weights to features closer to bearing fault characteristic frequencies. The effectiveness of the proposed method is validated through experiments on three bearing datasets, showing promise for bearing fault diagnostics under different operating conditions.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Engineering, Electrical & Electronic

Adaptive k-Sparsity-Based Weighted Lasso for Bearing Fault Detection

Yuanhang Sun et al.

Summary: In this paper, an adaptive k-sparsity-based weighted Lasso method is proposed to extract fault features from vibration signals for bearing fault diagnosis. The method utilizes a weighted l(1)-norm sparse regularization term and an adaptive parameter setup based on the integration of k-sparsity and forward-backward splitting algorithm. Experimental results show that the proposed method is more effective in extracting fault features from noisy vibration signals compared to other conventional methods.

IEEE SENSORS JOURNAL (2022)

添加到收藏夹

Article Computer Science, Information Systems

Robust Segmentation Based on Salient Region Detection Coupled Gaussian Mixture Model

Xiaoyan Pan et al.

Summary: This paper proposes an improved image segmentation model, named FTGMM, which introduces frequency-tuned salient region detection into Gaussian mixture model. The results show that the proposed method has higher precision and better robustness compared to other methods.

INFORMATION (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Method of fault feature selection and fusion based on poll mode and optimized weighted KPCA for bearings

Junxian Shen et al.

Summary: The health monitoring system for equipment is crucial for industrial production. This study proposes a feature selection and fusion method based on poll mode and optimized Weighted Kernel Principal Component Analysis (WKPCA) method to dig deeper for effective features and improve the separability of fault samples.

MEASUREMENT (2022)

添加到收藏夹

Article Engineering, Industrial

Convolutional kernel aggregated domain adaptation for intelligent fault diagnosis with label noise

Yulin Ma et al.

Summary: This paper introduces an unsupervised domain adaptation strategy for intelligent fault diagnosis, proposing the CKADA method for fault knowledge transfer. The method effectively addresses the issues of label noise and domain representation through the design of a convolutional kernel aggregated layer, a classification bridge layer, and a discrimination bridge layer.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Research on fault diagnosis technology of centrifugal pump blade crack based on PCA and GMM

Shuping Cao et al.

Summary: A fault diagnosis method based on principal component analysis and Gaussian mixed model for crack faults in centrifugal pump blades was proposed and shown to perform well in experimental testing.

MEASUREMENT (2021)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Simultaneous feature and instance selection in big noisy data using memetic variable neighborhood search

Chun-Cheng Lin et al.

Summary: This paper proposes a hybrid memetic algorithm combined with variable neighborhood search for simultaneous instance and feature selection, which performs well in addressing big noisy data problems.

APPLIED SOFT COMPUTING (2021)

添加到收藏夹

Article Automation & Control Systems

Modified multiscale weighted permutation entropy and optimized support vector machine method for rolling bearing fault diagnosis with complex signals

Zhenya Wang et al.

Summary: This paper proposes a novel intelligent fault-diagnosis method for rolling bearing fault diagnosis, utilizing generalized composite multiscale weighted permutation entropy and supervised Isomap algorithm for feature extraction and dimensionality reduction, and employing a support vector machine for diagnosis and identification, confirming the effectiveness of the proposed method through experiments.

ISA TRANSACTIONS (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Gaussian mixture model with feature selection: An embedded approach

Yinlin Fu et al.

Summary: A new algorithm called Expectation Selection Maximization (ESM) is proposed in this paper to address the issue of confusion and increased computational cost in GMM models by adding a feature selection step. The introduction of a relevancy index (RI) assists in feature selection by indicating the probability of assigning data points to specific clustering groups. The theoretical analysis justifies the effectiveness of RI for feature selection.

COMPUTERS & INDUSTRIAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Multi-source feature extraction of rolling bearing compression measurement signal based on independent component analysis

Jing Li et al.

Summary: This study proposes a composite fault diagnosis method of rolling bearing based on compressed sensing framework, which shows improvement in both the reconstruction precision and separation stability of fault signals in experiments, effectively extracting fault characteristics and achieving fault diagnosis.

MEASUREMENT (2021)

添加到收藏夹

Article Computer Science, Artificial Intelligence

CASA-based speaker identification using cascaded GMM-CNN classifier in noisy and emotional talking conditions

Ali Bou Nassif et al.

Summary: This study introduces a new algorithm to improve speaker identification accuracy in noisy and emotional talking conditions, and experiments show promising results in noisy environments.

APPLIED SOFT COMPUTING (2021)

添加到收藏夹

Article Automation & Control Systems

Adaptive variational mode decomposition and its application to multi-fault detection using mechanical vibration signals

Xiuzhi He et al.

Summary: The proposed adaptive variational mode decomposition (AVMD) method addresses the issue of key hyper-parameters needing to be predefined by introducing the syncretic impact index (SII) and utilizing the envelope power spectrum for fault feature extraction. Analysis on simulated signals and experimental applications demonstrates the effectiveness of the method in separating impulsive multi-fault signals.

ISA TRANSACTIONS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Rolling bearing fault diagnosis using transient-extracting transform and linear discriminant analysis

Yuguo Zhou et al.

Summary: This paper proposes a fault diagnosis method based on TET and LDA for rolling bearing faults, which can effectively identify faults with different positions, damage levels, and damage types.

MEASUREMENT (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A novel hybrid method based on KELM with SAPSO for fault diagnosis of rolling bearing under variable operating conditions

Hao Su et al.

Summary: The paper proposes a novel hybrid method for diagnosing rolling bearing faults under variable conditions. By extracting fault features from multiple domains and using improved learning machines, the method allows for efficient and automatic fault detection.

MEASUREMENT (2021)

添加到收藏夹

Article Chemistry, Analytical

Novel Bearing Fault Diagnosis Using Gaussian Mixture Model-Based Fault Band Selection

Andrei S. Maliuk et al.

Summary: This paper proposes a Gaussian mixture model-based method for bearing fault band selection (GMM-WBBS) in signal processing, which achieves reliable feature extraction and interference elimination. Classification is done using the Weighted KNN algorithm. Experimental results demonstrate positive effects in filtering discriminative data and improving classification performance.

SENSORS (2021)

添加到收藏夹

Article Engineering, Mechanical

A new intelligent fault identification method based on transfer locality preserving projection for actual diagnosis scenario of rotating machinery

Huailiang Zheng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Domain adaptive deep belief network for rolling bearing fault diagnosis

Changchang Che et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2020)

添加到收藏夹

Article Computer Science, Information Systems

Exploring temporal representations by leveraging attention-based bidirectional LSTM-RNNs for multi-modal emotion recognition

Chao Li et al.

INFORMATION PROCESSING & MANAGEMENT (2020)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Fault diagnosis of rolling bearing of wind turbines based on the Variational Mode Decomposition and Deep Convolutional Neural Networks

Zifei Xu et al.

APPLIED SOFT COMPUTING (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Research on rolling bearing state health monitoring and life prediction based on PCA and Internet of things with multi-sensor

Wang Heng et al.

MEASUREMENT (2020)

添加到收藏夹

Article Computer Science, Information Systems

Probabilistic Principal Component Analysis Assisted New Optimal Scale Morphological Top-Hat Filter for the Fault Diagnosis of Rolling Bearing

Siyu Zhao et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Computer Science, Information Systems

An Improved Empirical Mode Decomposition Based on Adaptive Weighted Rational Quartic Spline for Rolling Bearing Fault Diagnosis

Xuerong Ye et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Automation & Control Systems

Canonical variable analysis and long short-term memory for fault diagnosis and performance estimation of a centrifugal compressor

Xiaochuan Li et al.

CONTROL ENGINEERING PRACTICE (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Sigmoid-based refined composite multiscale fuzzy entropy and t-SNE based fault diagnosis approach for rolling bearing

Jinde Zheng et al.

MEASUREMENT (2018)

添加到收藏夹

Article Chemistry, Analytical

A Reliable Health Indicator for Fault Prognosis of Bearings

Bach Phi Duong et al.

SENSORS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Bearing vibration data collected under time-varying rotational speed conditions

Huan Huang et al.

DATA IN BRIEF (2018)

添加到收藏夹

Proceedings Paper Automation & Control Systems

Fault detection of slow speed bearings using an integrated approach

Sylvester A. Aye et al.

IFAC PAPERSONLINE (2015)

添加到收藏夹

Article Engineering, Mechanical

Bearing performance degradation assessment using locality preserving projections and Gaussian mixture models

Jianbo Yu

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)

添加到收藏夹

Article Automation & Control Systems

Machine fault diagnosis based on Gaussian mixture model and its application

Gang Yu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.