4.7 Article

Temperature dependence of the strength of Nb-Mo-Ta-W alloys due to screw dislocations

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Multidisciplinary

Thermal super-jogs control the high-temperature strength plateau in Nb-Mo-Ta-W alloys

Sicong He et al.

Summary: The refractory multi-element alloys (RMEA) with body-centered cubic (bcc) structure have attracted much attention as potential high-temperature materials. Recent research on Nb-Mo-Ta-W alloys suggests that the role of edge dislocations, caused by atomic-level chemical fluctuations, plays a key role in their remarkable strength above 1000℃. This study proposes a strengthening mechanism based on thermal super-jogs in edge dislocations, which act as strong obstacles to dislocation motion, and explains the strength plateau observed in these alloys.

ACTA MATERIALIA (2023)

Article Materials Science, Multidisciplinary

Vacancy formation energies and migration barriers in multi-principal element alloys

Ankit Roy et al.

Summary: This study investigates the stability and diffusion barriers of vacancies in high-temperature alloys using density-functional theory and finds that local lattice distortion caused by charge-transfer between neighboring atoms in different chemical environments strongly affects the stability and barriers. The study suggests that (Ti, Zr) elements are more likely to diffuse than (Mo, W) elements under irradiation, indicating the potential for controlling material degradation through tuning the composition of alloying elements.

ACTA MATERIALIA (2022)

Article Materials Science, Multidisciplinary

Progress and challenges in the theory and modeling of complex concentrated alloys

W. A. Curtin et al.

Summary: The high complexity of high entropy alloys presents unique challenges in understanding defect structures and behavior phases. Computational design of new alloys is difficult but essential due to the wide range of possible compositions.

MRS BULLETIN (2022)

Article Materials Science, Multidisciplinary

The hierarchical energy landscape of screw dislocation motion in refractory high-entropy alloys

Xinyi Wang et al.

Summary: This study constructs and reports the potential energy landscape governing screw dislocation motion in high-entropy alloys (HEAs). It reveals a hierarchical and multilevel structure, which retards dislocation movement and can be regulated by introducing chemical short-range order.

ACTA MATERIALIA (2022)

Article Chemistry, Physical

Vacancy Energetics and Diffusivities in the Equiatomic Multielement Nb-Mo-Ta-W Alloy

Xinran Zhou et al.

Summary: In this study, vacancy energetics in the equiatomic Nb-Mo-Ta-W alloy were investigated using molecular statics calculations. The results demonstrate a wide distribution of vacancy formation and migration energies, which are influenced by short-range order.

MATERIALS (2022)

Article Nanoscience & Nanotechnology

Microscale deformation controlled by compositional fluctuations in equiatomic Nb-Mo-Ta-W alloys

Marta Pozuelo et al.

Summary: In this study, the direct link between the strength of micron-sized specimens of high-entropy alloys and deviations from equiatomic stoichiometry was established. The compositional fluctuations near the micropillar tip were found to be the best quantitative predictor of yield strength.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Article Materials Science, Multidisciplinary

Edge-dislocation-induced ultrahigh elevated-temperature strength of HfMoNbTaW refractory high-entropy alloys

Ko-Kai Tseng et al.

Summary: This study combines solid-solution strengthening calculation and melting point prediction to design single-phase RHEA with ultrahigh strength at 1600 degrees C. By changing the deformation mode of dislocations, the strength level of RHEAs at high temperatures can be significantly increased. This provides important guidance for developing RHEAs with ultrahigh strength level.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

Superior High-Temperature Strength in a Supersaturated Refractory High-Entropy Alloy

Rui Feng et al.

Summary: High-entropy alloys show promising applications at high temperatures and a single-phase alloy with high-temperature strength can be designed based on intrinsic material characteristics. The high-temperature strength retention is attributed to mechanisms such as large atomic-size and elastic-modulus mismatches, insensitive temperature dependence of elastic constants, and dominance of non-screw character dislocations caused by strong solute pinning.

ADVANCED MATERIALS (2021)

Article Nanoscience & Nanotechnology

Designing VxNbMoTa refractory high-entropy alloys with improved properties for high-temperature applications

M. Wang et al.

Summary: The novel VxNbMoTa high-entropy alloys with vanadium concentrations of 0-25 at.% exhibit exceptional phase stability and high temperature strength, as well as excellent room-temperature ductility and resistance to high temperature deformation.

SCRIPTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

Theory of solid solution strengthening of BCC Chemically Complex Alloys

S. I. Rao et al.

Summary: An analytic model for substitutional solid solution strengthening in BCC CCAs based on a/2<111> screw dislocation mobility is developed and presented. Different strengthening mechanisms are observed at different temperatures, requiring modifications to existing models to apply to refractory CCAs.

ACTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

High-strength NbMoTaX refractory high-entropy alloy with low stacking fault energy eutectic phase via laser additive manufacturing

Hang Zhang et al.

Summary: The newly developed NbMoTaTi0.5Ni0.5 HEA exhibits high room-temperature compressive strength of 2297 MPa and high-temperature compressive strength of 651 MPa. The addition of Ni and Ti suppresses crack formation, enhances formability of NbMoTa HEA, and improves formability by transforming microcracks due to grain boundaries with low stacking fault energy. This study serves as a guideline for developing refractory high-entropy alloys via additive manufacturing like selective laser melting.

MATERIALS & DESIGN (2021)

Article Materials Science, Multidisciplinary

Local chemical fluctuation mediated ductility in body-centered-cubic high-entropy alloys

Yeqiang Bu et al.

Summary: This study captured the dynamic interaction between LCFs and dislocations in ductile BCC HfNbTiZr HEAs, demonstrating how LCFs influence strength and ductility by promoting dislocation interaction. The observed double cross-slips caused by LCFs homogenously distribute dislocations onto various atomic planes, contributing to ductilization in HfNbTiZr. These findings offer insights into the deformation mechanisms of HEAs and suggest new strategies for designing ductile BCC HEAs.

MATERIALS TODAY (2021)

Article Materials Science, Multidisciplinary

Cross-kinks control screw dislocation strength in equiatomic bcc refractory alloys

Xinran Zhou et al.

Summary: Research on refractory multi-element alloys with body-centered cubic structure has shown that chemical energy fluctuations play a significant role in their strength at high temperatures, which cannot be explained by standard models. The formation of cross kinks and self-pinning have been identified as key contributors to the alloy's strength.

ACTA MATERIALIA (2021)

Article Multidisciplinary Sciences

Atomistic simulations of dislocation mobility in refractory high-entropy alloys and the effect of chemical short-range order

Sheng Yin et al.

Summary: The presence of short-range order influences the mobility of dislocations in high-entropy alloys, with edge dislocations being enhanced and double-kink nucleation in screw dislocations being reduced. A cross-slip locking mechanism is observed for the motion of screws, providing extra strengthening for refractory high-entropy alloy system.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

High energy barriers for edge dislocation motion in body-centered cubic high entropy alloys

R. E. Kubilay et al.

Summary: Recent research suggests that edge dislocations in high-entropy alloys have high barriers for motion, leading to high strengths at elevated temperatures. Computational studies on two model alloys show agreement with theoretical predictions, validating the analytic theory for guiding alloy selection based on edge motion properties. Additionally, a reduced analytic model based on solute misfit volumes explains significant strength increases in certain alloy compositions, further supporting the effectiveness of the analytic theory in understanding alloy behavior.

NPJ COMPUTATIONAL MATERIALS (2021)

Article Materials Science, Multidisciplinary

Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K

Francesco Maresca et al.

ACTA MATERIALIA (2020)

Article Materials Science, Multidisciplinary

Theory of screw dislocation strengthening in random BCC alloys from dilute to High-Entropy alloys

Francesco Maresca et al.

ACTA MATERIALIA (2020)

Article Materials Science, Multidisciplinary

Origin of high strength in the CoCrFeNiPd high-entropy alloy

Binglun Yin et al.

MATERIALS RESEARCH LETTERS (2020)

Article Chemistry, Physical

Complex strengthening mechanisms in the NbMoTaW multi-principal element alloy

Xiang-Guo Li et al.

NPJ COMPUTATIONAL MATERIALS (2020)

Article Materials Science, Multidisciplinary

Theory of double-kink nucleation in dilute BCC alloys

Alireza Ghafarollahi et al.

ACTA MATERIALIA (2020)

Article Multidisciplinary Sciences

Unusual activated processes controlling dislocation motion in body-centered-cubic high-entropy alloys

Bing Chen et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

Article Materials Science, Multidisciplinary

A model for interstitial solid solution strengthening of body centered cubic metals

S. Rao et al.

MATERIALIA (2020)

Article Materials Science, Multidisciplinary

Solute/screw dislocation interaction energy parameter for strengthening in bcc dilute to high entropy alloys

A. Ghafarollahi et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2019)

Review Materials Science, Multidisciplinary

Development and exploration of refractory high entropy alloys-A review

Oleg N. Senkov et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Article Materials Science, Multidisciplinary

Direct prediction of the solute softening-to-hardening transition in W-Re alloys using stochastic simulations of screw dislocation motion

Yue Zhao et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2018)

Article Materials Science, Multidisciplinary

Breakthrough applications of high-entropy materials

Jien-Wei Yeh et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Article Chemistry, Physical

Mechanical properties of refractory high-entropy alloys: Experiments and modeling

H. W. Yao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Review Materials Science, Multidisciplinary

A critical review of high entropy alloys and related concepts

D. B. Miracle et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Atomistic simulations of dislocations in a model BCC multicomponent concentrated solid solution alloy

S. I. Rao et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Microstructural stability and mechanical behavior of FeNiMnCr high entropy alloy under ion irradiation

N. A. P. Kiran Kumar et al.

ACTA MATERIALIA (2016)

Article Physics, Multidisciplinary

MoNbTaV Medium-Entropy Alloy

Hongwei Yao et al.

ENTROPY (2016)

Article Materials Science, Multidisciplinary

Phase stability and microstructures of high entropy alloys ion irradiated to high doses

Songqin Xia et al.

JOURNAL OF NUCLEAR MATERIALS (2016)

Article Thermodynamics

Accelerated exploration of multi-principal element alloys for structural applications

O. N. Senkov et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2015)

Article Engineering, Mechanical

Thermally-activated non-Schmid glide of screw dislocations in W using atomistically-informed kinetic Monte Carlo simulations

Alexander Stukowski et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2015)

Article Metallurgy & Metallurgical Engineering

Irradiation Behavior in High Entropy Alloys

Song-qin Xia et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2015)

Article Nanoscience & Nanotechnology

On the room temperature deformation mechanisms of a TiZrHfNbTa refractory high-entropy alloy

J. -Ph. Couzinie et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Article Materials Science, Multidisciplinary

Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy

Yu Zou et al.

ACTA MATERIALIA (2014)

Article Physics, Multidisciplinary

Exploration and Development of High Entropy Alloys for Structural Applications

Daniel B. Miracle et al.

ENTROPY (2014)

Article Multidisciplinary Sciences

Mapping strain rate dependence of dislocation-defect interactions by atomistic simulations

Yue Fan et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2013)

Article Materials Science, Multidisciplinary

Stress and temperature dependence of screw dislocation mobility in α-Fe by molecular dynamics

M. R. Gilbert et al.

PHYSICAL REVIEW B (2011)

Article Chemistry, Physical

Refractory high-entropy alloys

O. N. Senkov et al.

INTERMETALLICS (2010)

Article Physics, Applied

Room-temperature dislocation climb in metallic interfaces

Jian Wang et al.

APPLIED PHYSICS LETTERS (2009)

Article Materials Science, Multidisciplinary

The glide of screw dislocations in bcc Fe: Atomistic static and dynamic simulations

Julien Chaussidon et al.

ACTA MATERIALIA (2006)

Article Materials Science, Multidisciplinary

Moving dislocations in disordered alloys: Connecting continuum and discrete models with atomistic simulations

J. Marian et al.

PHYSICAL REVIEW B (2006)

Article Materials Science, Multidisciplinary

A non-singular continuum theory of dislocations

W Cai et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2006)

Article Chemistry, Physical

Dynamic transitions from smooth to rough to twinning in dislocation motion

J Marian et al.

NATURE MATERIALS (2004)

Article Materials Science, Multidisciplinary

Dislocation glide in model Ni(Al) solid solutions by molecular dynamics -: art. no. 054111

E Rodary et al.

PHYSICAL REVIEW B (2004)