☆ 4.7 Article

Mechanical properties of a novel hierarchical cellular structure architectured with minimal surfaces and Voronoi-tessellation

COMPOSITE STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

Design optimization of a novel bio-inspired 3D porous structure for crashworthiness

Hanfeng Yin et al.

Summary: A novel hierarchical three-dimensional porous (H3DP) structure inspired by bone in nature was created and showed excellent energy absorption capacity. Numerical simulation and experimental validation revealed that the crashworthiness of the H3DP structure is influenced by design parameters, and multi-objective optimization was conducted to obtain the optimal design.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Design exploration of 3D-printed triply periodic minimal surface scaffolds for bone implants

Teerapong Poltue et al.

Summary: TPMS scaffolds have advantages in precise geometric modification and controllable physical characteristics; FE modeling and CFD analysis were utilized to examine the synergistic effects of different TPMS structures; Gyroid, Diamond, and IWP were shown as promising candidates with flexible design space and desirable properties.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Mechanics

Quasi-static and dynamic compressive behaviour of sheet TPMS cellular structures

Nejc Novak et al.

Summary: This research evaluated the compressive behavior of TPMS cellular structures under quasi-static and dynamic loading, showing that dynamic loading resulted in higher plateau stress and energy absorption in the plastic region of the samples.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Laser powder bed fusion of bio-inspired honeycomb structures: Effect of twist angle on compressive behaviors

Kaijie Lin et al.

Summary: In this study, novel honeycomb structures with twisted features were designed and manufactured using laser powder bed fusion. The impact of twist angle on compressive behavior was experimentally investigated, showing that a 30-degree twist angle resulted in the most uniform stress distribution and highest specific compressive strength and energy absorption ability. Finite element simulation revealed that structures with 0.75 mm wall thickness and 3 unit cells per side exhibited the highest specific energy absorption ability among honeycomb structures with a 30-degree twist angle.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Additively Manufactured Gradient Porous Ti-6Al-4V Hip Replacement Implants Embedded with Cell-Laden Gelatin Methacryloyl Hydrogels

Elham Davoodi et al.

Summary: The development of porous implants with conflicting design criteria has been overcome by designing implants and scaffolds based on interconnected TPMS to enhance both biological response and mechanical strength. Gradually decreasing porosity from the surface to the center provides mechanical strength, while studying unit cell size helps discover the printability limit where specific surface area is maximized.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of porosity gradient pattern on mechanical performance of additive manufactured Ti-6Al-4V functionally graded porous structure

Yinze Xiong et al.

Summary: The mechanical properties of additively manufactured Ti-6Al-4 V functionally graded porous structures were studied, revealing that lattice designs with a solid core exhibited the best mechanical performance. Further analysis and experimentation confirmed the rationale behind this design.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Development of novel hybrid TPMS cellular lattices and their mechanical characterisation

Nejc Novak et al.

Summary: The mechanical properties of hybrid cellular structures designed using implicit functions were investigated both experimentally and numerically. Two proposed samples comprised of a Gyroid and a Diamond unit cells hybridised linearly and radially were studied. The validated computational models will be used for evaluating crashworthiness performance of other designs for protective equipment applications.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Out-of-plane mechanical design of bi-directional hierarchical honeycombs

Wenzhen Huang et al.

Summary: A novel bi-directional hierarchical honeycomb design strategy was proposed and three kinds of bidirectional hierarchical honeycombs were developed to investigate their compression performance. The study showed that the bi-directional hierarchical honeycombs have superior material distribution characteristics, contributing to improved energy absorption efficiency.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

Mechanical characteristics and deformation mechanism of functionally graded triply periodic minimal surface structures fabricated using stereolithography

Cheng Zhang et al.

Summary: Triply periodic minimal surface (TPMS) structures are widely used for their smooth surface and pore interconnectivity, and a novel design approach based on the log-sigmoid function has been proposed in this study. Functionally graded TPMS structures were successfully fabricated using stereolithography, with the I-WP type showing superior mechanical properties. The study revealed a combination of stretching-and bending-dominated failure deformations in these structures.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

Design, mechanical properties and energy absorption capability of graded-thickness triply periodic minimal surface structures fabricated by selective laser melting

Xiaojie Fan et al.

Summary: This study introduces a novel method for designing graded-thickness TPMS structures and summarizes and compares the manufacturability, mechanical properties, and energy absorption capacities of Ti6Al4V graded samples with different thicknesses and TPMS types. The results reveal that constant-thickness TPMS samples exhibit good stiffness, strength, and energy absorption capacities, while graded-thickness samples avoid large stress fluctuations and show higher elastic moduli and cumulative energy absorption values than constant-thickness samples. Additionally, the local curvature distribution predicts the deformation behavior of TPMS structures.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Mechanics

Permeability and fluid flow-induced wall shear stress in bone scaffolds with TPMS and lattice architectures: A CFD analysis

Davar Ali et al.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2020)

添加到收藏夹

Article Engineering, Biomedical

Functionally graded and multi-morphology sheet TPMS lattices: Design, manufacturing, and mechanical properties

Oraib Al-Ketan et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Crushing behavior and optimization of sheet-based 3D periodic cellular structures

Hanfeng Yin et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

Mechanical and energy absorption characteristics of additively manufactured functionally graded sheet lattice structures with minimal surfaces

Miao Zhao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Manufacturing

Acoustic absorptions of multifunctional polymeric cellular structures based on triply periodic minimal surfaces fabricated by stereolithography

Wenjing Yang et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2020)

添加到收藏夹

Article Engineering, Mechanical

Sheet and network based functionally graded lattice structures manufactured by selective laser melting: Design, mechanical properties, and simulation

Hailun Zhou et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Biomedical

Biological and mechanical property analysis for designed heterogeneous porous scaffolds based on the refined TPMS

Songhua Ma et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical Response of 3D Printed Bending-Dominated Ligament-Based Triply Periodic Cellular Polymeric Solids

Aliaa M. Abou-Ali et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices

Oraib Al-Ketan et al.

ADVANCED ENGINEERING MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Compression-compression fatigue behaviour of gyroid-type triply periodic minimal surface porous structures fabricated by selective laser melting

Lei Yang et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of functionally graded TPMS structures fabricated by additive manufacturing

Shixiang Yu et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Physics, Multidisciplinary

Temperature Rise Associated with Adiabatic Shear Band: Causality Clarified

Yazhou Guo et al.

PHYSICAL REVIEW LETTERS (2019)

添加到收藏夹

Article Computer Science, Software Engineering

Optimal design and modeling of gyroid-based functionally graded cellular structures for additive manufacturing

Dawei Li et al.

COMPUTER-AIDED DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication of polymeric lattice structures for optimum energy absorption using Multi Jet Fusion technology

F. N. Habib et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effective design and simulation of surface-based lattice structures featuring volume fraction and cell type grading

I. Maskery et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Gyroid porous titanium structures: A versatile solution to be used as scaffolds in bone defect reconstruction

A. Yanez et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Engineering, Mechanical

Mechanical response of a triply periodic minimal surface cellular structures manufactured by selective laser melting

Lei Yang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Functionally graded porous scaffolds in multiple patterns: New design method, physical and mechanical properties

Fei Liu et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Engineering, Biomedical

Surface curvature in triply-periodic minimal surface architectures as a distinct design parameter in preparing advanced tissue engineering scaffolds

Sebastien B. G. Blanquer et al.

BIOFABRICATION (2017)

添加到收藏夹

Review Engineering, Biomedical

Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review

Xiaojian Wang et al.

BIOMATERIALS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Dynamic Behavior of Engineered Lattice Materials

J. A. Hawreliak et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Engineering, Biomedical

Novel real function based method to construct heterogeneous porous scaffolds and additive manufacturing for use in medical engineering

Nan Yang et al.

MEDICAL ENGINEERING & PHYSICS (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Deformation and fracture behavior of laser processed dense and porous Ti6Al4V alloy under static and dynamic loadinge

N. Biswas et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Computer Science, Software Engineering

Isotropic Remeshing with Fast and Exact Computation of Restricted Voronoi Diagram

Dong-Ming Yan et al.

COMPUTER GRAPHICS FORUM (2009)

添加到收藏夹

Article Chemistry, Applied

Compressive strain at the onset of densification of cellular solids

Q. M. Li et al.

JOURNAL OF CELLULAR PLASTICS (2006)

添加到收藏夹

Article Multidisciplinary Sciences

The properties of foams and lattices

MF Ashby

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.