☆ 4.6 Article

Suppressing pre-aggregation to increase polymer solar cell ink shelf life

JOURNAL OF MATERIALS CHEMISTRY A (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Multidisciplinary Sciences

Interactions between nonfullerene acceptors lead to unstable ternary organic photovoltaic cells

Yongxi Li et al.

Summary: In order to improve the performance and lifetime of organic photovoltaic devices, precise control over the purity, composition, and structure of organic semiconductors is necessary. Ternary-blend organic photovoltaics have shown promise in improving solar spectral coverage and reducing energy losses. However, the blending process compromises the purity of the ternary blend, leading to impurities that affect device reproducibility and long-term reliability.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2023)

添加到收藏夹

Article Multidisciplinary Sciences

19.31% binary organic solar cell and low non-radiative recombination enabled by non-monotonic intermediate state transition

Jiehao Fu et al.

Summary: The authors achieved the suppression of non-radiative recombination loss and improved the performance of organic solar cells by regulating the self-organization of bulk-heterojunction in a non-monotonic manner. The efficiency of the organic solar cells reached over 19% with a low non-radiative recombination loss of 0.168 eV.

NATURE COMMUNICATIONS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Situ Absorption Characterization Guided Slot-Die-Coated High-Performance Large-Area Flexible Organic Solar Cells and Modules

Yi-Fan Shen et al.

Summary: Slot-die coating is the most compatible method for roll-to-roll processing of large-area flexible organic solar cells (OSCs), but its performance lags behind spin-coating. This study investigates the film-formation kinetics of two acceptors, Qx-1 and Qx-2, in slot-die coating. The excessive crystallinity of Qx-2 leads to oversized crystal domains, while Qx-1 shows excellent performance with a power conversion efficiency (PCE) of 13.70%.

ADVANCED MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fibrillization of Non-Fullerene Acceptors Enables 19% Efficiency Pseudo-Bulk Heterojunction Organic Solar Cells

Donghui Li et al.

Summary: This study demonstrates the fibrillization of non-fullerene acceptors (NFAs) with the assistance of solvent additive to enhance the performance of organic solar cells (OSCs). The molecular dynamics simulations show that the additive enhances intermolecular packing and induces self-assembly of NFAs into fibril structures. The resulting OSCs show improved power conversion efficiency, light absorption, charge transport, and collection properties.

ADVANCED MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

12.42% Monolithic 25.42 cm2 Flexible Organic Solar Cells Enabled by an Amorphous ITO-Modified Metal Grid Electrode

Yunfei Han et al.

Summary: This study introduces a thin amorphous indium tin oxide (ITO) film (alpha-ITO) as a filler to improve the performance of metal grid electrode in flexible organic solar cells (OSCs). The alpha-ITO significantly enhances the bending resistance and long-term stability of the electrode, while also improving charge transporting efficiency.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology

Lei Zhu et al.

Summary: Morphological control of donor and acceptor domains is crucial for efficient organic photovoltaics, and this study demonstrates a double-fibril network strategy to achieve a high power conversion efficiency of 19.3%.

NATURE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organic Photovoltaics: Understanding the Preaggregation of Polymer Donors in Solution and Its Morphological Impact

Tonghui Wang et al.

Summary: This study uses thermodynamic analysis, molecular dynamics simulations, and density functional theory calculations to establish the χ value as a useful figure of merit for evaluating the extent of polymer aggregation in solution, and explores how intermolecular interactions between polymers and solvents contribute to the variations in χ values. By examining four representative polymer donors in solution, the research provides a detailed description of the relationships among intermolecular interactions, polymer solution aggregation, and morphological features of the active layers with χ as a robust bridge.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Chemistry, Physical

A molecular interaction-diffusion framework for predicting organic solar cell stability

Masoud Ghasemi et al.

Summary: The diffusion of NF-SMA into the donor polymer exhibits Arrhenius behavior, with the activation energy linearly scaling with the enthalpic interaction parameters between the two materials. The most thermodynamically unstable systems are the most kinetically stabilized.

NATURE MATERIALS (2021)

添加到收藏夹

Article Energy & Fuels

Visible Light-Induced Degradation of Inverted Polymer:Nonfullerene Acceptor Solar Cells: Initiated by the Light Absorption of ZnO Layer

Bowen Liu et al.

Summary: The degradation behaviors of inverted PM6:IT-4F solar cells with different ZnO layers were systematically investigated, revealing that photochemical reactions at the IT-4F/ZnO interface play a key role in the decomposition of IT-4F. Hydroxyl radicals generated by the photo-oxidation of dangling hydroxide by ZnO are confirmed as the main reason causing the decomposition. Treatment of ZnO with hydroxide and/or hydroxyl radical scavenger is found to improve the stability of the PSCs, supporting the proposed degradation mechanism.

SOLAR RRL (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Benzo[1,2-b:4,5-b']difuran Polymer-Based Non-Fullerene Organic Solar Cells: The Roles of Non-Fullerene Acceptors and Molybdenum Oxide on Their Ambient Stabilities and Processabilities

Zhi Zheng et al.

Summary: The MoOx layer was found to have a detrimental effect on the ambient stability of organic solar cells, while BDF polymers improved the performance of the cells, allowing them to maintain high efficiency and stability under ambient conditions.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Challenges to the Success of Commercial Organic Photovoltaic Products

Maximilian Moser et al.

Summary: Advancements in organic photovoltaic materials have led to significant improvements in device performance, but commercial viability remains a challenge. The limitations in high performing blends focus on industrial upscaling considerations, where the use of Y-series nonfullerene acceptors and synthetically simple materials are found to be most effective in maximizing efficiency.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Chlorinated Donor Polymer Achieving High-Performance Organic Solar Cells with a Wide Range of Polymer Molecular Weight

Anping Zeng et al.

Summary: In the field of non-fullerene organic solar cells, a chlorinated donor polymer named D18-Cl is reported in this study, which can achieve high performance with a wide range of polymer molecular weight. Devices based on D18-Cl show higher open-circuit voltage and outstanding short-circuit current density, resulting in higher efficiency compared to those based on D18.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

54 cm2 Large-Area Flexible Organic Solar Modules with Efficiency Above 13%

Fei Qin et al.

Summary: This study presents efficient large-area flexible single cells and modules based on flexible electrodes, as well as a flexible power source for charging. The electrodes exhibit low surface roughness and excellent optoelectronic and mechanical properties.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Well-Mixed Phase Formed by Two Compatible Non-Fullerene Acceptors Enables Ternary Organic Solar Cells with Efficiency over 18.6%

Yunhao Cai et al.

Summary: The ternary strategy of incorporating a third component into a binary blend has led to highly efficient organic solar cells with unprecedented power conversion efficiency values.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Small-molecular donor guest achieves rigid 18.5% and flexible 15.9% efficiency organic photovoltaic via fine-tuning microstructure morphology

Zhenyu Chen et al.

Summary: Incorporating highly ordered crystalline small molecules into host binary systems has been shown to significantly improve the photovoltaic performance of organic solar cells. By designing and synthesizing small molecular donors with similar chemical structures, it was found that the silicon-containing G19 exhibited a higher degree of order in the host system, resulting in improved power conversion efficiency.

JOULE (2021)

添加到收藏夹

Article Chemistry, Physical

The performance-stability conundrum of BTP-based organic solar cells

Yunpeng Qin et al.

Summary: Organic photovoltaic technology has achieved high power conversion efficiency, but achieving long-term stability is crucial. Research has identified a structure-T-g framework for BTP acceptors and shown that PC71BM can improve stability under certain conditions.

JOULE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Unraveling the Microstructure-Related Device Stability for Polymer Solar Cells Based on Nonfullerene Small-Molecular Acceptors

Xiaoyan Du et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

18% Efficiency organic solar cells

Qishi Liu et al.

SCIENCE BULLETIN (2020)

添加到收藏夹

Review Chemistry, Physical

Emerging Approaches in Enhancing the Efficiency and Stability in Non-Fullerene Organic Solar Cells

Fuwen Zhao et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thermodynamic Properties and Molecular Packing Explain Performance and Processing Procedures of Three D18:NFA Organic Solar Cells

Zhen Wang et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synergistic Optimization Enables Large-Area Flexible Organic Solar Cells to Maintain over 98% PCE of the Small-Area Rigid Devices

Guodong Wang et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

General rule for the energy of water-induced traps in organic semiconductors

Guangzheng Zuo et al.

NATURE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Rational Strategy to Stabilize an Unstable High-Efficiency Binary Nonfullerene Organic Solar Cells with a Third Component

Youqin Zhu et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Quenching to the Percolation Threshold in Organic Solar Cells

Long Ye et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Physical

Delineation of Thermodynamic and Kinetic Factors that Control Stability in Non-fullerene Organic Solar Cells

Masoud Ghasemi et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Physical

Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core

Jun Yuan et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Photocatalytic effect of ZnO on the stability of nonfullerene acceptors and its mitigation by SnO2 for nonfullerene organic solar cells

Youyu Jiang et al.

MATERIALS HORIZONS (2019)

添加到收藏夹

Article Chemistry, Physical

Measuring Temperature-Dependent Miscibility for Polymer Solar Cell Blends: An Easily Accessible Optical Method Reveals Complex Behavior

Zhengxing Peng et al.

CHEMISTRY OF MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Quantitative relations between interaction parameter, miscibility and function in organic solar cells

Long Ye et al.

NATURE MATERIALS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor-acceptor demixing

Ning Li et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Extensive Penetration of Evaporated Electrode Metals into Fullerene Films: Intercalated Metal Nanostructures and Influence on Device Architecture

Guangye Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Spectroscopy

Characterizing morphology in organic systems with resonant soft X-ray scattering

Joshua H. Carpenter et al.

JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2015)

添加到收藏夹

Article Chemistry, Physical

Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC71BM Solar Cells

Brian A. Collins et al.

ADVANCED ENERGY MATERIALS (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Aggregation in a High-Mobility n-Type Low-Bandgap Copolymer with Implications on Semicrystalline Morphology

Robert Steyrleuthner et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

添加到收藏夹

Article Polymer Science

Poly(3-hexylthiophene) and [6,6]-Phenyl-C61-butyric Acid Methyl Ester Mixing in Organic Solar Cells

Hyun Wook Ro et al.

MACROMOLECULES (2012)

添加到收藏夹

Article Polymer Science

Polymer Crystallization of Partially Miscible Polythiophene/Fullerene Mixtures Controls Morphology

Derek R. Kozub et al.

MACROMOLECULES (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Scherrer grain-size analysis adapted to grazing-incidence scattering with area detectors

Detlef-M. Smilgies

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.