☆ 4.7 Article

Wavelength-resolved near infra-red light induced free-radical polymerization

POLYMER CHEMISTRY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Challenges and Opportunities in 3D Laser Printing Based on (1+1)-Photon Absorption

Vincent Hahn et al.

Summary: Most light-based 3D printing methods rely on optical or chemical nonlinearities for polymerization reactions. Two-photon absorption is commonly used in 3D micro-and nanoprinting, but this article reviews three emerging processes that allow for quadratic nonlinearity without relying on two-photon absorption, namely upconversion luminescence, two-step absorption, and triplet-triplet annihilation. These (1 + 1)-photon absorption processes enable the use of continuous-wave lasers at lower peak powers and cost compared to two-photon absorption. The article discusses recent progress, challenges, and future perspectives.

ACS PHOTONICS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Visible-Light-Reactive Single-Chain Nanoparticles

Kai Mundsinger et al.

Summary: We present a single-chain nanoparticle (SCNP) system that exhibits three times higher catalytic efficiency for the photooxidation of nonpolar alkenes compared to an equivalent concentration of small-molecule photosensitizer. The SCNP is constructed using poly(ethylene glycol) methyl ether methacrylate and glycidyl methacrylate, compacted through multifunctional thiol-epoxide ligation, and functionalized with Rose Bengal (RB). The confined RB within the SCNP achieves enhanced photocatalysis for nonpolar alkenes due to spatial proximity in the hydrophobic region.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

添加到收藏夹

Article Chemistry, Physical

Customization of Supramolecular Hydrogels through One-Step Photopolymerization and Its Mechanism

Ruifen Tang et al.

Summary: A series of transparent hydrogels with highly tunable properties were achieved through a simple one-step method of free-radical photopolymerization (FRPP) using a single monomer. The properties of these hydrogels were adjusted by changing the polymer chain length and intermolecular interactions. The study also found temperature-dependence in the photoinitiator decomposition rate and internal interactions of the hydrogels, which could inspire further research in FRPP.

CHEMISTRY OF MATERIALS (2023)

添加到收藏夹

Article Polymer Science

Synergistic, Orthogonal, and Antagonistic Photochemistry for Light-Induced 3D Printing

Jan Hobich et al.

Summary: 3D printing techniques often use a single color light, but introducing a second color light can enhance control and open up new possibilities. Recently, printing techniques with two colors of light have emerged, showing great potential for development.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2023)

添加到收藏夹

Article Polymer Science

Two Photon Induced Pulsed Laser Polymerization with Near Infrared Light

Philipp Neidinger et al.

Summary: This paper introduces the 800 nm two-photon pulsed laser polymerization (PLP) and demonstrates its working principle through biological tissue. The reliability of 2P PLP in determining propagation rate coefficients is shown using the example of the free radical polymerization of methyl methacrylate (MMA) at frequencies ranging from 10 to 100 Hz.

ACS MACRO LETTERS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Sequence-independent activation of photocycloadditions using two colours of light

Philipp W. Kamm et al.

Summary: We have established sequence-independent photochemical activation using two reactive chromophores, achieving full lambda-orthogonality through differences in reaction quantum yields and wavelength-dependent reactivity profiles.

CHEMICAL SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Near Infrared Light Induced Radical Polymerization in Water

Philipp Neidinger et al.

Summary: This study introduces a gold nanorod-driven methodology to induce free radical polymerization in water using near infrared light. The process utilizes photothermal conversion and heat transfer to generate radicals, allowing control over the molecular weight and reaction conversion of the polymers. The results demonstrate the potential of this initiation mechanism for inducing polymerization in biological environments.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Porphyrin-Based Organic Network Comprising Sustainable Carbon Dots for Photopolymerization

Xiongfei Luo et al.

Summary: In this study, sustainable carbon dots (CDs) based on furfuraldehyde (F-CD) were synthesized and used as a photosensitive material for photopolymerization. The resulting heterogeneous material showed good electrochemical and photonic properties, enabling controlled polymerization reactions. Chain extension experiments using MMA and styrene as monomers were successful.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of non-alignment on nearfield coupling, charge density and sensitivity to the host medium of a gold nanorod homodimer

Mohammed Alsawafta

Summary: This study investigates the impact of non-alignment on the plasmonic coupling parameters between two gold nanorods, focusing on the resonance wavelength, nearfield intensity, charge density, and sensitivity factor. The results from the FDTD electrodynamics simulation tool show that the parameters decay exponentially as the interparticle spacing increases, indicating contributions from both multipolar and dipolar modes to the plasmonic coupling. On the other hand, when the two resonators are shifted transversely away from each other, the resonance wavelength and sensitivity factor of the coupled mode decay sigmoidally. The behavior of the other two coupling parameters, charge density and nearfield enhancement factor, depends on the transverse shift in a complex manner. Overall, the findings suggest that the coupling parameters in non-aligned resonators cannot be predicted by the existing universal scaling behavior in metallic homodimers.

JOURNAL OF MATERIALS SCIENCE (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Vat Photopolymerization Additive Manufacturing Technology for Bone Tissue Engineering Applications

David Bahati et al.

Summary: Additive manufacturing using Vat photopolymerization (VPP) techniques such as digital light processing (DLP) and stereolithography (SLA) has revolutionized the production of three-dimensional objects. These techniques offer high accuracy, precision, and the ability to create complex porous structures at a lower cost and in less time compared to traditional subtractive manufacturing. DLP and SLA are particularly suitable for medical applications, including bone tissue engineering, due to their mechanical and biological properties.

ADVANCED ENGINEERING MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Controlled synthesis of gold nanorod dimers with end-to-end configurations

Xuxing Lu et al.

Summary: This study demonstrates two methods for synthesizing gold nanorod dimers and shows that these dimers can be used to enhance two-photon-excited fluorescence signals.

RSC ADVANCES (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Action Plots in Action: In-Depth Insights into Photochemical Reactivity

Ishrath Mohamed Irshadeen et al.

Summary: This study utilized measuring action spectra to map covalent bond formation and cleavage, revealing that UV/vis spectra fail to accurately predict photochemical reactivity. The research demonstrates that tunable lasers can selectively excite molecules, allowing for in-depth exploration of the mechanisms of photoinduced reactions.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Leveraging on ENZ Metamaterials to Achieve 2D and 3D Hyper-Resolution in Two-Photon Direct Laser Writing

Giuseppe Emanuele Lio et al.

Summary: A novel technique has been developed to improve the resolution of two-photon direct laser writing lithography. The study shows the fabrication of ultra-thin all-dielectric metalenses and highly detailed dielectric 3D bas-relief structures.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Orthogonal photochemistry-assisted printing of 3D tough and stretchable conductive hydrogels

Hongqiu Wei et al.

Summary: The study demonstrates the successful preparation of tough conductive hydrogels using an orthogonal photochemistry-assisted printing technique, which features rapid, controllable chemical reactions and template-free fabrication of arbitrary structures.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Carbon Dots as a Promising Green Photocatalyst for Free Radical and ATRP-Based Radical Photopolymerization with Blue LEDs

Ceren Kuetahya et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Article Biophysics

Customized hybrid and NIR-light triggered thermoresponsive drug delivery microparticles synthetized by photopolymerization in a one-step flow focusing continuous microreactor

Isabel Ortiz de Solorzano et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Green light triggered [2+2] cycloaddition of halochromic styrylquinoxaline-controlling photoreactivity by pH

Kubra Kalayci et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Polymer Science

Two colours of light drive PET-RAFT photoligation

Laura Delafresnaye et al.

POLYMER CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Protection-Group-Free Synthesis of Sequence-Defined Macromolecules via Precision λ-Orthogonal Photochemistry

Waldemar Konrad et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

添加到收藏夹

Article Polymer Science

Rapid Oxygen Tolerant Aqueous RAFT Photopolymerization in Continuous Flow Reactors

Neomy Zaquen et al.

MACROMOLECULES (2019)

添加到收藏夹

Article Polymer Science

Fillers as Heaters for Photothermal Polymerization upon NIR Light

Aude Heloise Bonardi et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2019)

添加到收藏夹

Article Biochemistry & Molecular Biology

DNA-Polymer Conjugates by Photoinduced RAFT Polymerization

Thorsten Lueckerath et al.

BIOMACROMOLECULES (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Photopolymerization in 3D Printing

Ali Bagheri et al.

ACS APPLIED POLYMER MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Subtractive Photoresist Platform for Micro- and Macroscopic 3D Printed Structures

Markus M. Zieger et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Novel Materials for 3D Printing by Photopolymerization

Michael Layani et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Polymer Science

Microcapsule synthesis via RAFT photopolymerization in vegetable Oil as a green solvent

Fumi Ishizuka et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2018)

添加到收藏夹

Review Polymer Science

3D printing of photopolymers

Jing Zhang et al.

POLYMER CHEMISTRY (2018)

添加到收藏夹

Article Polymer Science

Photoinduced Thermal Polymerization Reactions

A. -H. Bonardi et al.

MACROMOLECULES (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Reconfigurable photoactuator through synergistic use of photochemical and photothermal effects

Markus Lahikainen et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Polymer Science

Two-in-One: λ-Orthogonal Photochemistry on a Radical Photoinitiating System

Silvana Hurrle et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Wavelength Dependence of Light-Induced Cycloadditions

Jan P. Menzel et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

添加到收藏夹

Article Polymer Science

Wavelength-Dependent Photochemistry of Oxime Ester Photoinitiators

David E. Fast et al.

MACROMOLECULES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Two-photon polymerization for biological applications

Alexander K. Nguyen et al.

MATERIALS TODAY (2017)

添加到收藏夹

Article Polymer Science

Visible light-induced iniferter polymerization of methacrylates enhanced by continuous flow

Maarten Rubens et al.

POLYMER CHEMISTRY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fabrication of Conductive 3D Gold-Containing Microstructures via Direct Laser Writing

Eva Blasco et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Star polymer synthesis via lambda-orthogonal photochemistry

Kai Hiltebrandt et al.

CHEMICAL COMMUNICATIONS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Catalyst free visible light induced cycloaddition as an avenue for polymer ligation

Paul Lederhose et al.

CHEMICAL COMMUNICATIONS (2016)

添加到收藏夹

Article Polymer Science

Aqueous RAFT Photopolymerization with Oxygen Tolerance

Sivaprakash Shanmugam et al.

MACROMOLECULES (2016)

添加到收藏夹

Correction Optics

Two-photon direct laser writing of ultracompact multi-lens objectives (vol 7, 11763, 2016)

Timo Gissibl et al.

NATURE PHOTONICS (2016)

添加到收藏夹

Article Polymer Science

Visible and sunlight driven RAFT photopolymerization accelerated by amines: kinetics and mechanism

Michael L. Allegrezza et al.

POLYMER CHEMISTRY (2016)

添加到收藏夹

Article Optics

Two-photon direct laser writing of ultracompact multi-lens objectives

Timo Gissibl et al.

NATURE PHOTONICS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

λ-Orthogonal Pericyclic Macromolecular Photoligation

Kai Hiltebrandt et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Visible-Light-Induced Click Chemistry

Jan O. Mueller et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

添加到收藏夹

Article Chemistry, Physical

Fluence Threshold for Photothermal Bubble Generation Using Plasmonic Nanoparticles

Khaled Metwally et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

添加到收藏夹

Review Nanoscience & Nanotechnology

A review on the processing accuracy of two-photon polymerization

Xiaoqin Zhou et al.

AIP ADVANCES (2015)

添加到收藏夹

Article Polymer Science

Light-induced wettability changes on polymer surfaces

Natalie Wagner et al.

POLYMER (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Light-Induced Modular Ligation of Conventional RAFT Polymers

Kim K. Oehlenschlaeger et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)

添加到收藏夹

Review Chemistry, Multidisciplinary

Light-Induced Click Reactions

Mehmet Atilla Tasdelen et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)

添加到收藏夹

Article Optics

Thermo-plasmonics: using metallic nanostructures as nano-sources of heat

Guillaume Baffou et al.

LASER & PHOTONICS REVIEWS (2013)

添加到收藏夹

Article Chemistry, Physical

Surface plasmon coupling in end-to-end linked gold nanorod dimers and trimers

Jatish Kumar et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

添加到收藏夹

Article Engineering, Biomedical

Bone regeneration using a microstereolithography-produced customized poly(propylene fumarate)/diethyl fumarate photopolymer 3D scaffold incorporating BMP-2 loaded PLGA microspheres

Jin Woo Lee et al.

BIOMATERIALS (2011)

添加到收藏夹

Article Chemistry, Physical

Improved Working Model for Interpreting the Excitation Wavelength- and Fluence-Dependent Response in Pulsed Laser-Induced Size Reduction of Aqueous Gold Nanoparticles

Daniel Werner et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

添加到收藏夹

Article Chemistry, Physical

Plasmonic coupling in noble metal nanostructures

Prashant K. Jain et al.

CHEMICAL PHYSICS LETTERS (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Medical prototyping using two photon polymerization

Roger J. Narayan et al.

MATERIALS TODAY (2010)

添加到收藏夹

Article Biochemistry & Molecular Biology

Thermoresponsive and Photocrosslinkable PEGMEMA-PPGMA-EGDMA Copolymers from a One-Step ATRP Synthesis

Hongyun Tai et al.

BIOMACROMOLECULES (2009)

添加到收藏夹

Article Chemistry, Physical

A calorimetric investigation of the assembly of gold nanorods to form necklaces

Neenu Varghese et al.

CHEMICAL PHYSICS LETTERS (2008)

添加到收藏夹

Article Physics, Applied

Thermal analysis of gold nanorods heated with femtosecond laser pulses

O. Ekici et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2008)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Photopolymerization of biomaterials: issues and potentialities in drug delivery, tissue engineering, and cell encapsulation applications

B Baroli

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2006)

添加到收藏夹

Review Polymer Science

Recent developments in the use of two-photon polymerization in precise 2D and 3D microfabrications

KS Lee et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2006)

添加到收藏夹

Article Chemistry, Physical

Contributions from radiation damping and surface scattering to the linewidth of the longitudinal plasmon band of gold nanorods: a single particle study

Carolina Novo et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2006)

添加到收藏夹

Article Multidisciplinary Sciences

Light-induced shape-memory polymers

A Lendlein et al.

NATURE (2005)

添加到收藏夹

Article Engineering, Biomedical

Photopolymerizable hydrogels for tissue engineering applications

KT Nguyen et al.

BIOMATERIALS (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.