4.6 Article

From waste to wealth: chelating polymeric membranes for precious palladium recovery from wastewater

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Highly effective recovery of palladium from a spent catalyst by an acid- and oxidation-resistant electrospun fibers as a sorbent

Nianshou Cheng et al.

Summary: In this paper, acid- and oxidation-resistant nanofiber modified by 2-Thionicotinic acid (TNNanofiber) was fabricated and demonstrated effective trapping of Pd(II) ions from extremely acidic and oxidizing systems derived from spent catalyst leaching. The adsorption kinetics and isotherm models showed good fitting for Pd(II) ions adsorption on TN-Nanofiber, with equilibrium reached in 60 minutes and a maximum uptake capacity of 348.4 mg/g. Column adsorption experiments confirmed the feasibility of Pd(II) ions separation from spent catalyst using TNNanofiber. Investigation of the adsorption mechanism revealed a planar quadrilateral coordination pattern between Pd(II) ions and TNNanofiber adsorption sites.

CHEMICAL ENGINEERING JOURNAL (2023)

Review Biochemistry & Molecular Biology

Transition Metal Complexes of Thiosemicarbazides, Thiocarbohydrazides, and Their Corresponding Carbazones with Cu(I), Cu(II), Co(II), Ni(II), Pd(II), and Ag(I)-A Review

Ashraf A. Aly et al.

Summary: This review highlights interesting and recent applications of transition metals in the complexation of thiosemicarbazides, thiocarbohydrazides, and their corresponding carbazones. The review discusses the chosen five metals, their electronic configurations, and the stability of the complexes. It also presents different synthesis routes and examples of Cu(I), Cu(II), Co(II), Ni(II), Ag(I), and Pd(II) complexes of thiosemicarbazide and thiocarbohydrazide. Furthermore, the review summarizes the catalytic use of metal complexes of thiosemicarbazones and thiocarbazones ligands, as well as their biological importance.

MOLECULES (2023)

Article Environmental Sciences

Fine-tuning of carbon nanostructures/alginate nanofiltration performance: Towards electrically-conductive and self-cleaning properties

Jamaliah Aburabie et al.

Summary: Electrically-conductive membranes with enhanced ion selectivity and self-cleaning properties have attracted attention. Carbon nanostructures (CNS) with high electrical conductivity and fast water transport are embedded into Alginate network to fabricate self-cleaning nanofiltration membranes. The membranes exhibit outstanding electrical conductivity and improved swelling/shrinkage resistivity. The rejection profiles of Na2SO4 are optimized and 90% rejection is achieved for silane-CaAlg200-10% CNS membranes. Successful dye/salt separation is achieved with a rejection of 100% for dye and only 3.1% for Na2SO4, and 54% Na2SO4 rejection in the second stage.

CHEMOSPHERE (2023)

Article Engineering, Chemical

Electrically-conductive, Joule-heated pervaporation membranes for desalination: Investigating energy-saving, self-cleaning and anti-swelling trifecta

Jamaliah Aburabie et al.

Summary: A self-heated PV membrane utilizing carbon nanostructures-alginate membrane Joule heater is developed, which eliminates the need for preheating the entire feed solution. The self-heated membranes enhance permeate flux and reduce energy requirement.

DESALINATION (2023)

Article Engineering, Chemical

Facile morphological tuning of thin film composite membranes for enhanced desalination performance

Shabin Mohammed et al.

Summary: This study demonstrates a facile approach to fabricate a highly wrinkled selective layer on polyamide (PA) membranes through bio-inspired modification of the support layer with Y-type zeolites. Incorporating smaller dimension zeolites produced by a unique ball milling technique resulted in a defect-free selective layer. The membranes exhibited fast transport and excellent salt rejection for various salt solutions.

NPJ CLEAN WATER (2023)

Article Chemistry, Physical

Functional novel ligand based palladium(II) separation and recovery from e-waste using solvent-ligand approach

Aminul Islam et al.

Summary: The global e-waste generation is expected to increase significantly in the coming years, which may have a negative impact on health and the environment if not managed properly. This study focuses on recovering palladium from ceramic capacitors using a solvent-ligand process, with findings showing high purity recovery of Pd(II) under optimized conditions and minimal environmental impact compared to other methods. This sustainable approach to precious metal recovery contributes to the circular economy.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Review Engineering, Chemical

Recovery of precious metals from industrial wastewater towards resource recovery and environmental sustainability: A critical review

Ali Taghvaie Nakhjiri et al.

Summary: This review paper aims to provide an overview of the latest breakthroughs in the recovery of PMs from wastewater, including their industrial applications, recovery processes, and sustainable utilization methods and prospects.

DESALINATION (2022)

Article Chemistry, Inorganic & Nuclear

Antiproliferative activity of nickel(II), palladium(II) and zinc(II) thiosemicarbazone complexes

M. Carcelli et al.

Summary: Complexes of nickel(II), palladium(II), and zinc(II) with thiosemicarbazone ligands were synthesized and evaluated for their antiproliferative and genotoxic activities. The nickel complexes showed the most promising results, particularly the nickel dimer [NiL](2), which exhibited both antiproliferative and genotoxic activities.

INORGANICA CHIMICA ACTA (2022)

Article Polymer Science

Shifting to Transparent/Hazy Properties: The Case of Alginate/Network Cellulose All-Polysaccharide Composite Films

Jamaliah Aburabie et al.

Summary: This study proposes a simple method to fabricate light-management films made from natural polymers with tunable haze properties. By blending cellulose network and alginate solution, transparent films with customized haze are successfully synthesized. These films are suitable for large-scale production and can meet the requirements of various applications.

MACROMOLECULAR RAPID COMMUNICATIONS (2022)

Review Engineering, Environmental

A comprehensive review on the recycling of discarded printed circuit boards for resource recovery

Shaila Mir et al.

Summary: Printed circuit boards (PCBs) are crucial for electronic waste recycling. This review discusses various processes for extracting metals from PCBs and highlights the importance of pre-treatments and separation techniques. Selective recovery of high purity products and separate treatment of electronic waste and precious metal-rich components are emphasized.

RESOURCES CONSERVATION AND RECYCLING (2022)

Article Chemistry, Multidisciplinary

Breaking and Connecting: Highly Hazy and Transparent Regenerated Networked-Nanofibrous Cellulose Films via Combination of Hydrolysis and Crosslinking

Jamaliah Aburabie et al.

Summary: This study reports a novel highly transparent film fabricated from regenerated cellulose, which exhibits high optical haze and excellent thermal stability, water resistance, and mechanical resilience. The film has potential applications as environmentally-friendly optical substrates.

NANOMATERIALS (2022)

Article Biochemistry & Molecular Biology

Fabrication of Thin Film Composite Membranes on Nanozeolite Modified Support Layer for Tailored Nanofiltration Performance

Shabin Mohammed et al.

Summary: The study proposes modifying membrane supports with nanozeolites prepared by unique ball milling technique to enhance nanofiltration performance. Results showed that optimal membrane performance was achieved with supports modified with 0.1% nanozeolites, demonstrating high water permeance and salt rejection rates.

MEMBRANES (2022)

Article Engineering, Environmental

Selective recovery of silver and palladium from acidic waste solutions using dithiocarbamate-functionalized cellulose

Foni B. Biswas et al.

Summary: This study utilized a biomass-based adsorbent to efficiently extract silver and palladium from waste water, with the adsorbent showing high adsorption capacity and extraction rate for the target metals. The recovered metals can be obtained in high purity after extraction, the method is simple and efficient, does not require the use of toxic substances, and has great potential for application on a larger scale.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Biochemistry & Molecular Biology

Proton Conductive, Low Methanol Crossover Cellulose-Based Membranes

Jamaliah Aburabie et al.

Summary: This work presents the development of sulfated cellulose (SC) polymer and its potential as an electrolyte-membrane for direct methanol fuel cells (DMFC). The ion-conductive crosslinked SC membranes showed high methanol resistivity and proton conductivity, addressing a major hurdle in the widespread application of direct alcohol fuel cells. Compared to Nafion membranes, the crosslinked sulfated cellulose films have lower ion conductivity but significantly lower methanol crossover.

MEMBRANES (2021)

Article Engineering, Chemical

Comparative study between adsorption and membrane technologies for the removal of mercury

Hania Albatrni et al.

Summary: Mercury, as a harmful by-product of industrial activities, can be effectively removed from wastewater using adsorption and membrane separation technologies. Adsorption process offers lower cost and wider range of applications compared to membrane technologies.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Chemistry, Physical

Evaluation of Performance of Functionalized Amberlite XAD7 with Dibenzo-18-Crown Ether-6 for Palladium Recovery

Oana Alexandra Grad et al.

Summary: This study aimed to prepare a new adsorbent material for the recovery of metallic ions from diluted waste solutions by functionalizing a commercial polymeric support with crown ether. The synthesized material was characterized using various techniques and the adsorption performance and influencing factors of the adsorption process were investigated.

MATERIALS (2021)

Review Chemistry, Multidisciplinary

Surfactant Adsorption Isotherms: A Review

Shams Kalam et al.

Summary: This paper provides a brief overview of surfactant adsorption isotherms on rock surfaces, focusing on adsorption theories and commonly used models like Langmuir and Freundlich. More complex adsorption isotherms such as Redlich-Peterson and Sips are also discussed, which involve three parameters and can help select the appropriate model for experimental data.

ACS OMEGA (2021)

Article Chemistry, Physical

Separation and Recovery of Gold(III), Palladium(II) and Platinum(IV) by Solvent Extraction Using a New β-Diketone Derivative from Acidic Solutions

Elzbieta Radzyminska-Lenarcik et al.

Summary: This study demonstrates that a new amine derivative EDAB-acac can effectively separate a mixture containing Au(III), Pd(II), and Pt(IV) ions in an acidic medium (HCl) using solvent extraction. The impact of acid concentration and solvent type on separation efficiency was discussed, with high donor number solvents enhancing extraction. A 3-step stripping process for the recovery of Pd(II), Au(III), and Pt(IV) from the mixture was proposed, making it useful for e-waste recycling.

MATERIALS (2021)

Article Chemistry, Multidisciplinary

Alchemy-Inspired Green Paper for Spontaneous Recovery of Noble Metals

Yao Yao et al.

Article Engineering, Chemical

Separation of Palladium(II) and Rhodium(III) Using a Polymer Inclusion Membrane Containing a Phosphonium-Based Ionic Liquid Carrier

Adroit T. N. Fajar et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Article Materials Science, Multidisciplinary

Silane-Crosslinked Asymmetric Polythiosemicarbazide Membranes for Organic Solvent Nanofiltration

Jamaliah Aburabie et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2019)

Article Materials Science, Multidisciplinary

Composite Membrane Formation by Combination of Reaction-Induced and Nonsolvent-Induced Phase Separation

Jamaliah Aburabie et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2017)

Article Engineering, Chemical

A film-diffusion-based adsorption kinetic equation and its application

Chuncai Yao et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2017)

Article Biochemistry & Molecular Biology

Removal of Pb(II) and Cd(II) ions from aqueous solution by thiosemicarbazide modified chitosan

Manlin Li et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)

Review Green & Sustainable Science & Technology

Materials and membrane technologies for water and energy sustainability

Ngoc Lieu Le et al.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2016)

Article Biochemistry & Molecular Biology

Comprehending the interaction between chitosan and ionic liquid for the adsorption of palladium

A. Santhana Krishna Kumar et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2015)

Article Chemistry, Multidisciplinary

Simultaneous ultra-trace palladium(II) detection and recovery from wastewater using new class meso-adsorbent

Md. Rabiul Awual et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Article Chemistry, Applied

Thin-film composite crosslinked polythiosemicarbazide membranes for organic solvent nanofiltration (OSN)

Jamaliah Aburabie et al.

REACTIVE & FUNCTIONAL POLYMERS (2015)

Article Engineering, Chemical

Poly-thiosemicarbazide membrane for gold recovery

Luis Francisco Villalobos et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2014)

Article Chemistry, Multidisciplinary

The Adsorption of Gold, Palladium, and Platinum from Acidic Chloride Solutions on Mesoporous Carbons

Peter R. Zalupski et al.

SOLVENT EXTRACTION AND ION EXCHANGE (2014)

Article Engineering, Chemical

Highly selective recovery of palladium by a new silica-based adsorbent functionalized with macrocyclic ligand

Feifei Bai et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2013)

Article Biochemistry & Molecular Biology

Preparation of a Cu(II)-PVA/PA6 Composite Nanofibrous Membrane for Enzyme Immobilization

Quan Feng et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2012)

Article Microscopy

Sample preparation for atomic-resolution STEM at low voltages by FIB

Miroslava Schaffer et al.

ULTRAMICROSCOPY (2012)

Article Materials Science, Multidisciplinary

Recovery and Concentration of Precious Metals from Strong Acidic Wastewater

Hisayoshi Umeda et al.

MATERIALS TRANSACTIONS (2011)

Article Engineering, Biomedical

Palladium alloys for biomedical devices

John C. Wataha et al.

EXPERT REVIEW OF MEDICAL DEVICES (2010)

Article Engineering, Chemical

The environmental costs of platinum-PGM mining and sustainability: Is the glass half-full or half-empty?

Bonnie J. Glaister et al.

MINERALS ENGINEERING (2010)

Article Engineering, Environmental

Adsorption of platinum(IV) and palladium(II) from aqueous solution by thiourea-modified chitosan microspheres

Limin Zhou et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

Article Chemistry, Physical

Recovery and separation of palladium from spent catalyst

MA Barakat et al.

APPLIED CATALYSIS A-GENERAL (2006)

Article Chemistry, Physical

An elementary derivation of the hard/soft-acid/base principle

PW Ayers

JOURNAL OF CHEMICAL PHYSICS (2005)

Review Environmental Sciences

Platinum group elements in the environment and their health risk

K Ravindra et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2004)

Article Chemistry, Multidisciplinary

Selective recovery of palladium from used aqua regia by hollow fiber supported with liquid membrane

P Weerawat et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2003)