☆ 4.7 Article

Enhanced dielectric and thermal properties of SrTiO3/polyolefin composite substrate with dopamine-modified BNNS for microwave applications

CERAMICS INTERNATIONAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

A Malleable Composite Dough with Well- Dispersed and High-Content Boron Nitride Nanosheets

Lanshu Xu et al.

Summary: Aggregation of 2D nanosheet fillers in high loading polymer matrix limits composite performance improvement. A mechanical interlocking strategy is developed to incorporate high filling content (up to 20 wt %) boron nitride nanosheets (BNNSs) into a polytetrafluoroethylene (PTFE) matrix, resulting in a malleable and reusable BNNS/PTFE composite dough. The well-dispersed BNNS fillers can be rearranged into a highly oriented direction, leading to a composite film with significantly improved thermal conductivity, low dielectric constant/loss, and excellent mechanical properties.

ACS NANO (2023)

添加到收藏夹

Article Chemistry, Physical

Ultra-high dielectric constant and thermal conductivity SrTiO3@VTMS/PB composite for microwave substrate application

Zhengyi Yang et al.

Summary: In this study, vinyltrimethoxysilane (VTMS) treated SrTiO3 particles were composited with polybutadiene (PB) to create a promising composite for microwave applications. The effects of SrTiO3 doping on microstructure and dielectric properties were investigated in detail, and the thermal and mechanical properties of the composite were also analyzed. The xSrTiO(3)@VTMS/PB composite with 87.5 wt% SrTiO3 content exhibited the best dielectric properties, including a high dielectric constant (epsilon(r) = 21.1) and low dielectric loss (tan delta similar to 4.1 x 10(-3)) at 10 GHz.

APPLIED SURFACE SCIENCE (2023)

添加到收藏夹

Article Chemistry, Physical

High microwave dielectric constant and improved thermal stability of functionalized Zn0.15Nb0.3Ti0.55O2-filled polyolefin composites

Zhengyi Yang et al.

Summary: This study investigated the structure, microwave dielectric properties, and thermal properties of xZn(0.15)Nb(0.3)Ti(0.55)O(2) @VTMS/polyolefin composites in the range of x = 83-91 wt%. The results showed that a core-shell structure was formed to enhance the compatibility between ceramic particles and polyolefin matrix. The modified ceramic formed an interfacial layer with the resin matrix, improving the thermal stability of the composites. At x = 89 wt%, a high-D-k composite with promising microwave application potential was obtained.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Revisiting the adhesion mechanism of mussel-inspired chemistry

Chao Zhang et al.

Summary: This study reveals a previously unexplored adhesion mechanism in mussel-inspired chemistry, where 5,6-dihydroxyindole (DHI) moieties play a crucial role, challenging the conventional belief of catechol-dominated adhesion. The high adhesion strength of polydopamine (PDA) is attributed to the abundant yield of DHI moieties achieved through oxidation and cyclization during self-polymerization, suggesting that substituent chemistry and self-polymerization can govern adhesion in mussel-inspired materials.

CHEMICAL SCIENCE (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review on polymer composites with high thermal conductivity and low dielectric properties for electronic packaging

R. Li et al.

Summary: This review discusses in detail how to balance the thermal conductivity and dielectric properties in polymer composites. The recent progress of thermally conductive fillers is summarized, and the challenges and outlooks of polymers with high thermal conductivity and low dielectric properties are outlined.

MATERIALS TODAY PHYSICS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Functionalized Al2O3 fillers/glass fibers cloth/PTFE composites with excellent thermal properties

Youhong Tan et al.

Summary: The study prepared alumina/glass fibers cloth/polytetrafluoroethylene composites and found that composite substrates with 40 wt% Al2O3 exhibited ideal performance for high-frequency microwave substrates.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

添加到收藏夹

Article Chemistry, Physical

Insight into the effect of OH modification on the piezo-photocatalytic hydrogen production activity of SrTiO3

Yuying Jiang et al.

Summary: Surface modification with hydrophilic functional group greatly enhances the catalytic performance of SrTiO3 in photocatalysis, piezocatalysis, and piezo-photocatalysis for hydrogen production. The OH-modified SrTiO3 showed about two times higher hydrogen generation compared to pristine SrTiO3 due to its super hydrophilicity and increased oxygen vacancies. The optimal piezo-photocatalytic hydrogen evolution rate of OH-modified SrTiO3 was 5.3 times higher than the photocatalytic hydrogen evolution process of SrTiO3. This study presents a low-energy approach for the rational design of functional group modification nanomaterials with excellent piezo-photocatalytic performance.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced thermal conductivity and stability of boron nitride/phenyl silicone rubber composites via surface modification and grain alignment

Mingming Sheng et al.

Summary: This study successfully prepared polymer-based thermal insulation composites with excellent thermal conductivity and stability by modifying the boron nitride filler and applying pressure during processing. The modified boron nitride filler improved the thermal conductivity of the composites by enhancing its interface compatibility with the polymer matrix. Additionally, aligning the filler grains in the direction of heat flow by applying pressure further enhanced the through-plane thermal conductivity of the composites.

JOURNAL OF MATERIALS SCIENCE (2022)

添加到收藏夹

Article Materials Science, Ceramics

Study on properties of Ca0.9La0.067TiO3-0.01Al2O3 ceramics reinforced PSAE/fiber composite substrate with high εr

Haiyi Peng et al.

Summary: A self-permeation method was used to fabricate a Ca0.9La0.067TiO3-0.01Al(2)O(3) (CLT)-reinforced polysilylaryl-enyne/fiber multilayer board with different volume fractions of CLT (0-40 vol%). The composite with a volume fraction of 30% CLT exhibited optimal dielectric properties, high thermal conductivity, excellent thermal resistance, and mechanical property, making it a potential candidate material for print circuit boards in the microwave communication field.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Composites

High thermal conductive composite with low dielectric constant and dielectric loss accomplished through flower-like Al2O3 coated BNNs for advanced circuit substrate applications

Hao Wang et al.

Summary: A method to obtain COC-based substrate materials with high thermal conductivity by coating flower-like Al2O3 on the surface of BNNs was reported. These materials exhibit low dielectric constant, low dielectric loss, and high thermal conductivity, making them suitable for electronic equipment operating at high-frequency and high-speed signal transmission situations.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Novel Al2Mo3O12-PTFE composites for microwave dielectric substrates

Junqing Ren et al.

Summary: Novel PTFE-based composites with different contents of Al2Mo3O12 modified by the coupling agent F8261 were successfully prepared, showing improved densification and dielectric properties. The addition of modified Al2Mo3O12 powders increased the εr value while tan delta remained relatively constant. Among the composites, those with 30 wt% Al2Mo3O12 demonstrated the optimal dielectric properties. These results suggest that the 30 wt% Al2Mo3O12 - 70 wt% PTFE composite could be a promising candidate for high-performance microwave dielectric substrates.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Composites

One-step alkyl-modification on boron nitride nanosheets for polypropylene nanocomposites with enhanced thermal conductivity and ultra-low dielectric loss

Zilong Xie et al.

Summary: This study presents a low-loading polypropylene nanocomposites with uniformly-dispersed and interfacial engineered boron nitride nanosheets, which exhibit significantly enhanced thermal conductivity of 2.74 W/m.K and remarkably low dielectric loss of only 0.002. The strong interfacial noncovalent interactions between BNNS and macromolecular chain suppress the interfacial polarization, while the well-maintained hexagonal crystalline lattice of BNNS promises efficient phonon transmission. These thermal and dielectric performances outperform most previously reported thermoconductive polymer-based dielectrics, and the material also offers excellent electric breakdown strength, flexibility, and stretchability, providing a promising avenue for fabricating thermo-conductive dielectrics with low dielectric loss.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermal conductivity and electrical insulation properties of h-BN@PDA/silicone rubber composites

Xiaoyu Zhang et al.

Summary: By coating dopamine on hexagon boron nitride, composites with higher thermal conductivity and lower volume resistance were fabricated. When the filler content was 30 wt%, the thermal conductivity reached 0.95 W m(-1) K-1, and the volume resistivity was 2.5 x 10(11) Omega.cm, meeting the requirements of electronic materials.

DIAMOND AND RELATED MATERIALS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Effect of Dopamine-Functionalized Nano-h-BN on the Charge Dynamics and Thermal Properties of Epoxy Resins at High Temperatures for Potential Power Module Encapsulation Application

Chao Dai et al.

Summary: This paper investigates the charge dynamics and thermal properties of epoxy and its nanocomposites with different percentages of nano-hexagonal-boron nitride. The results show that the 10 wt % EP nanocomposite exhibits the best charge property and the uniform dispersion of nano-h-BN can improve both the electrical and thermal properties of epoxy. A proposed mechanism explains the effect of dopamine-functionalized nano-h-BN particles on enhancing the nanocomposite properties.

ACS APPLIED ELECTRONIC MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Bioinspired modification strategy to improve thermal conductivity of flexible poly(vinyl alcohol)/nanodiamond nanocomposite films for thermal management applications

Bingfei Nan et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Materials Science, Ceramics

Modified BCZN particles filled PTFE composites with high dielectric constant and low loss for microwave substrate applications

Hao Wang et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Composites

Interfacial regions and network dynamics in epoxy/POSS nanocomposites unravelling through their effects on the motion of molecular chains

Daomin Min et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Composites

Investigation on a novel polysilylaryl-enyne/Ca0.7La0.2TiO3 composite with an ultra-high dielectric constant and excellent temperature resistance

Haiyi Peng et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Composites

Fabrication of polymethyl methacrylate composites with silanized boron nitride by in-situ polymerization for high thermal conductivity

Hyunwoo Oh et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Thermal conductivity of 2D nano-structured boron nitride (BN) and its composites with polymers

Valentina Guerra et al.

PROGRESS IN MATERIALS SCIENCE (2019)

添加到收藏夹

Article Materials Science, Ceramics

Modification of Si3N4 ceramic powders and fabrication of Si3N4/PTFE composite substrate with high thermal conductivity

Ying Yuan et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Ceramics

Synthesis and characterization of PTFE/(NaxLi1-x)0.5Nd0.5TiO3 composites with high dielectric constant and high temperature stability for microwave substrate applications

Zongting Li et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cationic Polyelectrolyte Bridged Boron Nitride Microplatelet Based Poly(vinyl alcohol) Composite: A Novel Method toward High Thermal Conductivity

Huayuan Li et al.

ADVANCED MATERIALS INTERFACES (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Dopamine functionalization for improving crystallization behaviour of polyethylene glycol in shape-stable phase change material with silica fume as the matrix

Yan Chen et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Influence of SiO2 Addition on Properties of PTFE/TiO2 Microwave Composites

Ying Yuan et al.

JOURNAL OF ELECTRONIC MATERIALS (2018)

添加到收藏夹

Article Materials Science, Ceramics

Novel high dielectric constant and low loss PTFE/CNT composites

Haiyi Peng et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Engineering, Manufacturing

Polydopamine-bridged synthesis of ternary h-BN@PDA@SnO2 as nanoenhancers for flame retardant and smoke suppression of epoxy composites

Wei Cai et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Natural garnet reinforced high density polyethylene composites for sustainable microwave substrates

N. Sibi et al.

MATERIALS RESEARCH BULLETIN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of particle size distribution of silica on properties of PTFE/SiO2 composites

Zehua Jiang et al.

MATERIALS RESEARCH EXPRESS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Polydopamine-decorated boron nitride as nano-reinforcing fillers for epoxy resin with enhanced thermomechanical and tribological properties

Jun Song et al.

MATERIALS RESEARCH EXPRESS (2018)

添加到收藏夹

Article Chemistry, Physical

Surface modification of h-BN and its influence on the mechanical properties of CuSn10/h-BN composites

Ting Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Materials Science, Ceramics

Preparation, Characterization, and Dielectric Properties of PP/CaTiO3 Composites for Microwave Substrate Applications

Vallvakkattil Drishya et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Bioinspired Modification of h-BN for High Thermal Conductive Composite Films with Aligned Structure

Heng Shen et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

High-k and ultra-low-loss BADCy/Ni0.5Ti0.5NbO4 composites for PCB application fabricated by cold isostatic pressing and vacuum assisted infiltration processes

Biao Zhang et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

Dielectric properties of modified SrTiO3/PTFE composites for microwave RF antenna applications

Shiqi Jin et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2015)

添加到收藏夹

Article Materials Science, Ceramics

Electrical and thermal properties of low permittivity Sr2Al2SiO7 ceramic filled HDPE composites

K. M. Manu et al.

CERAMICS INTERNATIONAL (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

Ba(Zn1/3Ta2/3)O3 ceramics reinforced high density polyethylene for microwave applications

K. M. Manu et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Reinforcing effect of reclaim rubber on natural rubber/polybutadiene rubber blends

Debapriya De et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

Electrical and thermal properties of PTFE-Sr2ZnSi2O7 composites

T. Joseph et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2011)

添加到收藏夹

Article Multidisciplinary Sciences

Mussel-inspired surface chemistry for multifunctional coatings

Haeshin Lee et al.

SCIENCE (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.