☆ 4.7 Article

Origami embedded honeycomb with three-axial comparable and improved energy absorption performance

THIN-WALLED STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Materials Science, Multidisciplinary

Investigating the low-velocity impact behaviour of sandwich composite structures with 3D-printed hexagonal honeycomb core-a review

F. Nur Ainin et al.

Summary: This study provides a comprehensive review of previous and present research on the dynamic responses of 3D-printed sandwich composite structures. It discusses the low-velocity impact and failure mechanisms caused by impact load and energy absorption capabilities. Investigating the processes and mechanics of a material is crucial in addressing structural failure problems, primarily caused by fracture. The study emphasizes ongoing research into the low-velocity behavior of fabricated sandwich composite structures with 3D-printed hexagonal honeycomb cores and varying core materials.

FUNCTIONAL COMPOSITES AND STRUCTURES (2023)

添加到收藏夹

Article Materials Science, Composites

Dynamic behavior of single curved fiber-metal hybrid lamina composite shells under blast loading-experimental observations

Xin Li et al.

Summary: The study investigated the dynamic response of single curved fiber-metal hybrid lamina composite (FM-HLC) shells under blast loading. The influence of explosive mass and distance, weave pattern of fiber-metal hybrid lamina, and radius of curvature was analyzed. The experimental results showed that the deformation modes of curved FM-HLC shells under blast are similar to metal shells when failure is absent, but severe delamination only occurs at the site of damage region. This demonstrates that FM-HLC shells have better anti-delamination performance than traditional FMLs under blast loads.

COMPOSITES SCIENCE AND TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Mechanical

Impact resistance of foam-filled hybrid-chiral honeycomb beam under localized impulse loading

Xuke Lan et al.

Summary: In order to improve the impact resistance and energy absorption capacity of hybrid-chiral honeycomb beams, foam-filled hybrid-chiral honeycomb beams were designed and fabricated. The foam-filled beams showed enhanced impact resistance and higher specific energy absorption value compared to the empty beams. The impact resistance of the foam-filled beams can be effectively improved by using a gradient cell-wall thickness arrangement.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2023)

添加到收藏夹

Article Engineering, Civil

Experimental and numerical analysis of a novel assembled auxetic structure with two-stage programmable mechanical properties

Wei Jiang et al.

Summary: This article presents a novel fabrication methodology for auxetics by assembling plates and tubes, instead of using costly and inefficient manufacturing processes like 3D printing and laser cutting. The proposed structures show favorable mechanical performance and low-cost, large-scale fabrication potential, making them promising for applications in protective equipment and smart energy absorbers.

THIN-WALLED STRUCTURES (2023)

添加到收藏夹

Article Engineering, Civil

Effects of different configurations and gradients on compression responses of gradient honeycombs via selective laser melting

Yunfeng Wei et al.

Summary: The study found that small wall thickness of honeycomb components caused pore defects and reduced material density. Different configurations and gradients significantly affected the compression behavior of gradient honeycombs. The symmetric positive gradient (SP) configuration showed the most excellent compression performance.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Mechanics

Dynamic Crushing Behaviors of Multi-Layered Gradient Honeycombs with Different Poisson's Ratios: A Finite Element Simulation

Xin-Chun Zhang et al.

Summary: A new multi-layered gradient honeycomb (MGH) design was proposed in this work to improve the in-plane dynamic properties and control energy absorption capacities by filling the structure layer with different Poisson's ratio configurations. Explicit dynamic finite element simulation was used to investigate the dynamic behaviors and energy-absorbing characteristics of the MGHs under in-plane impact loadings. The effects of multi-layered gradient arrangements and impact velocities on the dynamic Poisson's ratios, dynamic plateau stresses, crushing load uniformities, and specific energy absorption of the MGHs were studied.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Novel artificial muscle using shape memory alloy spring bundles in honeycomb architecture in Bi-directions

Hussein F. M. Ali et al.

Summary: This paper presents a novel artificial muscle made of shape memory alloy spring bundles. The muscle, with small size and weight, is suitable for various biologically inspired applications. It consists of two sets of SMA springs that can be duplicated in parallel or in series to fit different actuation applications. The system is capable of accurately tracking the desired trajectories with the use of sensors and controllers.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2022)

添加到收藏夹

Article Engineering, Civil

Comparative study on in-plane compression properties of 3D printed continuous carbon fiber reinforced composite honeycomb and aluminum alloy honeycomb

Hao Dou et al.

Summary: This study proposes a lightweight continuous carbon fiber reinforced honeycomb composite using continuous fiber additive manufacturing and investigates its performance under different loading conditions. The findings demonstrate that carbon fiber enhances mechanical properties and changes deformation characteristics of the structures.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Manufacturing

Parametric optimization of corner radius in hexagonal honeycombs under in-plane compression

Athul Rajeev et al.

Summary: This study investigates the influence of corner radius on the performance of regular hexagonal honeycomb under compression loading. The results show that corner radii increase the effective modulus and reduce maximum corner stress, but there exists an optimum corner radius beyond which stresses rise again. The presence of a corner radius shifts the failure mechanism from nodal fracture to plastic hinging, providing benefits for energy absorption applications.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Energy absorption of self-similar inspired multi-cell tubes under quasi-static and dynamic loading

Yulong He et al.

Summary: This paper explores selfsimilar inspired multi-cell structures by replacing substructures according to different strategies. It investigates the effect of diameter, layout, and hierarchical order, and examines the tessellation and space-filling of these structures. The results demonstrate that specific energy absorption increases with hierarchical fractal order, and increasing side length is not an effective method for improving crashworthiness in lower-order multi-cell structures.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Engineering, Civil

Load-rate effects on the in-plane compressive behaviour of additively manufactured steel 316L honeycomb structures

Solomon O. Obadimu et al.

Summary: This study investigates the in-plane compressive performance of metallic honeycomb structures produced through material extrusion (ME) and laser powder bed fusion (LPBF). The research finds that the compressive mechanical properties of both types of honeycomb structures improve with increasing load rate, and varying the cell size can optimize the in-plane compressive performance.

ENGINEERING STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Plastic behavior of foam-filled negative Poisson?s ratio beams

Modi Zhao et al.

Summary: This paper studies the plastic behavior of foam-filled negative Poisson's ratio (NPR) beams using numerical and theoretical methods. The yield criterion for foam-filled NPR structures is established. The plastic behavior of clamped foam-filled NPR beams under lateral loading is developed, considering the interaction between axial force and moment. The finite element simulation confirms the correctness of the theoretical model, and the theoretical analysis and numerical calculation results are consistent. The effects of material and geometrical parameters, loading location, and punch width on the load-bearing and energy-absorbing capabilities of foam-filled NPR beams are considered by the theoretical model. The results show that increasing foam strength, angular size, wall thickness, and punch width improves the load-bearing and energy-absorbing capabilities of foam-filled NPR beams. Additionally, a closer loading location to the clamped end results in higher load and energy absorption.

ENGINEERING STRUCTURES (2022)

添加到收藏夹

Review Engineering, Multidisciplinary

A Review of Sandwich Composite Structures with 3D Printed Honeycomb Cores

Dechawat Wannarong et al.

Summary: Sandwich structures are widely used in engineering applications due to their lightweight nature, high bending stiffness, high fatigue resistance, and energy absorption capability. This article investigates the mechanical characteristics of ABS and PLA produced via additive manufacturing, and discovers that a re-entrant core with negative Poisson's ratio can enhance the bending stiffness. The performance of sandwich structures is influenced by core densities, designs, materials, face sheet thickness, and stacking sequence.

ENGINEERING JOURNAL-THAILAND (2022)

添加到收藏夹

Article Engineering, Mechanical

Origami metamaterial with two-stage programmable compressive strength under quasi-static loading

Zhejian Li et al.

Summary: The proposed origami metamaterial with two-stage programmable compressive strength combines stacked Miura-origami and rhombic honeycomb structure. By adjusting the geometries, the compressive response of each stage can be programmed within a certain range while minimizing crushing resistance fluctuation. The programmability of compressive properties is demonstrated and verified through analytical modeling, numerical analysis, and quasi-static compressive testing.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Review Engineering, Multidisciplinary

Inspiration from Nature's body armours - A review of biological and bioinspired composites

Abdallah Ghazlan et al.

Summary: The paper systematically reviews the structural-mechanical characteristics of selected biological armour systems, highlighting the potential of natural/biological materials to inspire the design of lightweight, flexible, and tough body armours. Investigation into various biological structures with ballistic protection potential, as well as techniques for analysis and fabrication of bioinspired armour composites, is discussed to inspire the development of more efficient bio-inspired armour systems for dynamic impact resistance.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Review Engineering, Multidisciplinary

Advanced honeycomb designs for improving mechanical properties: A review

Chang Qi et al.

Summary: Honeycombs are ultra-light materials with outstanding mechanical properties, widely used in various fields. Different designs at different scales affect the mechanical properties of honeycombs, and classifying honeycomb designs can better understand their characteristics.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

In-plane dynamic crushing behaviors of joint-based hierarchical honeycombs with different topologies

Xin-chun Zhang et al.

Summary: This paper investigates the dynamic crushing properties and energy absorption capacities of joint-based hierarchical honeycombs with different topologies, demonstrating that hierarchy has a significant influence on the deformation modes of honeycombs. By choosing proper hierarchical parameters, the dynamic plateau stress and specific energy absorption of joint-based hierarchical honeycombs can be improved, leading to enhanced crushing stress efficiency of the specimens. Additionally, the introduction of a non-dimensional dynamic sensitivity index allows for the investigation of dynamic shock enhancement in hierarchical honeycombs, providing valuable insights for the dynamic optimization design and controllable properties of cellular materials.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A novel gradient negative stiffness honeycomb for recoverable energy absorption

Shuai Chen et al.

Summary: This paper presents a novel GNS honeycomb structure and investigates its energy absorption performance through experiments and simulations, revealing the influence of structural parameters on energy absorption. The study shows that the novel GNS honeycomb has better repeatability, vibration control, and cushion performance compared to the NNS honeycomb, thus verifying its potential in the field of energy absorption.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Energy absorption characteristics of origami-inspired honeycomb sandwich structures under low-velocity impact loading

Jiaqi Qi et al.

Summary: This study investigates a new origami-inspired honeycomb sandwich plate and examines its low-velocity impact response and energy absorption characteristics through experiments and numerical analysis. The results show that the novel sandwich structure outperforms traditional honeycomb structures in terms of impact response and energy absorption.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Band gaps for wave propagation in 2-D periodic three-phase composites with coated star-shaped inclusions and an orthotropic matrix

G. Y. Zhang et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Civil

Experimental study of a honeycomb energy-absorbing device for high-speed trains

Benhuai Li et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2020)

添加到收藏夹

Article Mechanics

The effective in-plane elastic properties of hexagonal honeycombs with consideration for geometric nonlinearity

Yang Zhao et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Out-of-plane mechanical behaviors of a side hierarchical honeycomb

Yong Zhang et al.

MECHANICS OF MATERIALS (2020)

添加到收藏夹

Article Engineering, Civil

Crushing of vertex-based hierarchical honeycombs with triangular substructures

Dahai Zhang et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Mechanics

Process-induced deformation in U-shaped honeycomb aerospace composite structures

M. Al-Dhaheri et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Effects of fused deposition modeling process parameters on tensile, dynamic mechanical properties of 3D printed polylactic acid materials

Shuheng Wang et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Instruments & Instrumentation

Compression behavior of the 4D printed reentrant honeycomb: experiment and ?nite element analysis

Longtao Ji et al.

SMART MATERIALS AND STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Bending behavior of sandwich beam with tailored hierarchical honeycomb cores

Zhendong Li et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Large deformation and energy absorption of additively manufactured auxetic materials and structures: A review

Jianjun Zhang et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Aerospace

Out-of-plane and in-plane compression of additively manufactured auxetic structures

Amer Alomarah et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Physics, Fluids & Plasmas

Dynamics of Kresling origami deployment

N. Kidambi et al.

PHYSICAL REVIEW E (2020)

添加到收藏夹

Article Engineering, Civil

Experimental analysis of additively manufactured thin-walled heat-treated circular tubes with slits using AlSi10Mg alloy by quasi-static axial crushing test

Ahmed S. Mohamed et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Engineering, Mechanical

Impact performance enhancement of honeycombs through additive manufacturing-enabled geometrical tailoring

J. Jefferson Andrew et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Experimental and numerical investigation on 3D printed PLA sacrificial honeycomb cladding

H. B. Rebelo et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Mechanical properties and energy absorption capability of AuxHex structure under in-plane compression: Theoretical and experimental studies

Mengchuan Xu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Compressive behaviour of 3D printed thermoplastic polyurethane honeycombs with graded densities

Simon R. G. Bates et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Engineering, Mechanical

Nonrigidly Foldability Analysis of Kresling Cylindrical Origami

Cai Jianguo et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2017)

添加到收藏夹

Article Engineering, Mechanical

Bistable Behavior of the Cylindrical Origami Structure With Kresling Pattern

Cai Jianguo et al.

JOURNAL OF MECHANICAL DESIGN (2015)

添加到收藏夹

Article Engineering, Mechanical

Quasi-static impact of indented foldcores

J. M. Gattas et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)

添加到收藏夹

Article Mechanics

Compressive strengths and dynamic response of corrugated metal sandwich plates with unfilled and foam-filled sinusoidal plate cores

Jianxun Zhang et al.

ACTA MECHANICA (2013)

添加到收藏夹

Article Mechanics

Experimental study of the out-of-plane dynamic compression of hexagonal honeycombs

Shanqing Xu et al.

COMPOSITE STRUCTURES (2012)

添加到收藏夹

Article Engineering, Biomedical

Principal stiffness orientation and degree of anisotropy of human osteons based on nanoindentation in three distinct planes

Andreas G. Reisinger et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2011)

添加到收藏夹

Article Mechanics

Mean out-of-plane dynamic plateau stresses of hexagonal honeycomb cores under impact loadings

Sun Deqiang et al.

COMPOSITE STRUCTURES (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.