☆ 4.4 Article

Upcycling waste PMMA to durable composites via a transesterification-inverse vulcanization process

JOURNAL OF POLYMER SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Durable composites by vulcanization of oleyl-esterified lignin

Menisha S. Karunarathna et al.

Summary: Productive utilization of lignocellulosic biomass is crucial, but the lack of upconversion methods for the lignin component is a major challenge. By esterifying lignin with oleic acid and reacting it with sulfur, a new protocol was developed to increase lignin hydrophobicity and incorporate it into sulfur-rich materials. The resulting esterified lignin-sulfur (ELS) composites exhibited high compressive strength values (>20 MPa) exceeding ordinary Portland cements, making them sustainable alternatives for durable composites.

RSC ADVANCES (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

On the Mechanism of the Inverse Vulcanization of Elemental Sulfur: Structural Characterization of Poly(sulfur-random-(1,3-diisopropenylbenzene))

Jianhua Bao et al.

Summary: Organosulfur polymers derived from elemental sulfur via the inverse vulcanization process are a new and important class of macromolecules. However, the mechanism of inverse vulcanization and structural characterization of high-sulfur-content copolymers remain challenging. In this study, comprehensive structural characterizations were performed on poly-(S-r-DIB), revealing the incorrect assumptions about its repeating units and the significantly more complex polymerization mechanism.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2023)

添加到收藏夹

Article Polymer Science

Single-stage chemical recycling of plastic waste to yield durable composites via a tandem transesterification-thiocracking process

Charini P. Maladeniya et al.

Summary: Plastic waste poses a growing threat to the environment and human health, yet most of it is still disposed of in landfills. A disconnect between technology and implementation is hindering the recycling of plastic waste into valuable commodities. This study introduces a simple, single-stage process to chemically recycle PET into composite materials with properties comparable to commercial structural materials like Portland cement.

JOURNAL OF POLYMER SCIENCE (2023)

添加到收藏夹

Article Polymer Science

Exploring inverse vulcanisation mechanisms from the perspective of dark sulfur

Joseph J. Dale et al.

Summary: The build-up of elemental sulfur waste poses problems that require advancements in process and product design as solutions. Inverse vulcanisation, a process for generating high sulfur content polymeric materials, holds promise as a potential solution. However, a complete understanding of the formation of these materials is still lacking in this emerging field. This research investigates the formation mechanisms of 'dark sulfur' in order to further understand inverse vulcanisation. The detriments and benefits of dark sulfur in relation to its application and general usage are also explored.

EUROPEAN POLYMER JOURNAL (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Chemical recycling of poly(ethylene terephthalate) via sequential glycolysis, oleoyl chloride esterification and vulcanization to yield durable composites

Claudia V. Lopez et al.

Summary: In this study, a three-stage process for the chemical recycling of PET was developed using sustainably-sourced organic materials and industrial byproduct sulfur. PET was first glycolyzed with diethylene glycol to produce low molecular weight oligomers, which were then esterified and vulcanized with oleoyl chloride and elemental sulfur, respectively. The resulting composites exhibited excellent mechanical properties comparable to existing commercial structural materials.

MATERIALS ADVANCES (2023)

添加到收藏夹

Article Environmental Sciences

Microplastic-induced apoptosis and metabolism responses in marine Dinoflagellate, Karenia mikimotoi

Ting Zhao et al.

Summary: Microplastics have a negative impact on the marine dinoflagellate Karenia mikimotoi, with NPs being more harmful than MPs and potentially causing ecological problems upon exposure.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

High strength composites from low-value animal coproducts and industrial waste sulfur

Claudia Lopez et al.

Summary: In this study, high strength composites were prepared by reacting sulfur, plant oils, and brown grease. These composites exhibited impressive mechanical properties, making them a promising application for low value animal coproducts.

RSC ADVANCES (2022)

添加到收藏夹

Article Environmental Sciences

Polymethylmethacrylate nanoplastics can cause developmental malformations in early life stages of Xenopus laevis

C. Venancio et al.

Summary: The study assessed the effects of PMMA-NPLs on aquatic early life stages of Xenopus laevis, finding potential malformations at high concentrations and significant impacts on tadpole body weight and length after exposure.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

添加到收藏夹

Article Materials Science, Textiles

Mechanical and thermal properties of wood fiber reinforced geopolymer composites

Gabriel Furtos et al.

Summary: Geopolymers based on fly ash with wood fiber reinforcement show reduced mechanical properties with increasing wood fiber content. 20 wt% wood fiber addition might be the limit for acceptable mechanical properties, while 20-35 wt% wood fiber addition could offer a promising green alternative for building materials.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dark Sulfur: Quantifying Unpolymerized Sulfur in Inverse Vulcanized Polymers

Joseph J. Dale et al.

Summary: Inverse vulcanization is a method to form polymeric materials with high sulfur content by stabilizing polysulfide chains between organic comonomers instead of forming crystalline sulfur. Existing techniques only detect crystalline sulfur and cannot detect amorphous sulfur. A detailed study shows that the amount of amorphous sulfur in inverse vulcanized polymers increases during aging. Post-aging regeneration through stimulating cleavage of sulfur-sulfur bonds in the polymer is investigated.

ACS APPLIED POLYMER MATERIALS (2022)

添加到收藏夹

Article Polymer Science

A comparison of adhesive polysulfides initiated by garlic essential oil and elemental sulfur to create recyclable adhesives

Anthony E. Davis et al.

Summary: This study presents a method of producing inexpensive, sustainable, and recyclable adhesives using a combination of natural oils and petroleum byproducts. The effects of different sulfur sources on the properties of the adhesives were characterized through the preparation of a variety of polymers.

POLYMER CHEMISTRY (2022)

添加到收藏夹

Article Materials Science, Textiles

Mechanical Properties of Wood Fiber Reinforced Geopolymer Composites with Sand Addition

Gabriel Furtos et al.

Summary: Fly ash-based geopolymer composites, mixed with wood fiber and sand, have been shown to have comparable properties to ordinary Portland cement but with lower CO2 emissions. The addition of wood fiber was found to decrease the mechanical properties of the composites, suggesting that a limit of 15 wt.% wood fiber may be ideal for construction applications.

JOURNAL OF NATURAL FIBERS (2021)

添加到收藏夹

Article Engineering, Environmental

Quantitative Analysis of Polystyrene and Poly(methyl methacrylate) Nanoplastics in Tissues of Aquatic Animals

Xiao-Xia Zhou et al.

Summary: A novel and sensitive analytical method was reported for extracting and tracking nanoplastics from tissues of aquatic animals. This method involved a combination of alkaline digestion and protein precipitation steps for nanoplastics extraction, followed by quantitative analysis using pyrolysis gas chromatography-mass spectrometry.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Environmental

Waterborne exposure of gilthead seabream (Sparus aurata) to polymethylmethacrylate nanoplastics causes effects at cellular and molecular levels

I. Brandts et al.

Summary: This study evaluated the short-term exposure of 45 nm PMMANPs on gilthead seabream by analyzing biomarkers in liver and plasma. The results showed an up-regulation of genes associated with lipid metabolism, an increase in cholesterol and triglycerides in plasma, and activation of antioxidant defenses. After 96 hours, the antioxidant capacity decreased and genotoxicity in blood cells was observed.

JOURNAL OF HAZARDOUS MATERIALS (2021)

添加到收藏夹

Article Materials Science, Composites

Influence of Component Ratio on Thermal and Mechanical Properties of Terpenoid-Sulfur Composites

Charini P. Maladeniya et al.

Summary: Terpenoids are potentially sustainable replacements for petrochemical olefins and composites with attractive properties have been made from terpenoids and sulfur. The ratio of sulfur to terpenoid and the terpenoid olefin content significantly influence the thermal and mechanical properties of the composites, with compressive strength reaching up to 43 MPa for FarS(x) materials.

JOURNAL OF COMPOSITES SCIENCE (2021)

添加到收藏夹

Article Polymer Science

Risk Analysis on PMMA Recycling Economics

Jacopo De Tommaso et al.

Summary: The recycling of poly(methyl methacrylate) (PMMA) waste presents significant economic risks, but different scenarios and quality requirements can lead to varying returns and feasibility. Capital investment and product quality are the primary factors affecting profitability. Companies should aim for the highest quality regenerated product in their recycling efforts for long-term success.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Robust, remeltable and remarkably simple to prepare biomass-sulfur composites

Moira K. Lauer et al.

MATERIALS ADVANCES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A role for terpenoid cyclization in the atom economical polymerization of terpenoids with sulfur to yield durable composites

Charini P. Maladeniya et al.

MATERIALS ADVANCES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recyclable, sustainable, and stronger than portland cement: a composite from unseparated biomass and fossil fuel waste

Moira K. Lauer et al.

MATERIALS ADVANCES (2020)

添加到收藏夹

Article Chemistry, Physical

Facile route to an organosulfur composite from biomass-derived guaiacol and waste sulfur

Menisha S. Karunarathna et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Green Synthesis of Thermoplastic Composites from a Terpenoid-Cellulose Ester

Moira K. Lauer et al.

ACS APPLIED POLYMER MATERIALS (2020)

添加到收藏夹

Article Polymer Science

Sequential crosslinking for mechanical property development in high sulfur content composites

Timmy Thiounn et al.

JOURNAL OF POLYMER SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Chemically induced repair, adhesion, and recycling of polymers made by inverse vulcanization

Samuel J. Tonkin et al.

CHEMICAL SCIENCE (2020)

添加到收藏夹

Article Polymer Science

High strength,acid-resistantcomposites from canola, sunflower, or linseed oils: Influence of triglyceride unsaturation on material properties

Claudia V. Lopez et al.

JOURNAL OF POLYMER SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Crosslinker Copolymerization for Property Control in Inverse Vulcanization

Jessica A. Smith et al.

CHEMISTRY-A EUROPEAN JOURNAL (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Polysulfides Synthesized from Renewable Garlic Components and Repurposed Sulfur Form Environmentally Friendly Adhesives

Cristina Herrera et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

New Sulfur Organic Polymer-Concrete Composites Containing Waste Materials: Mechanical Characteristics and Resistance to Biocorrosion

Beata Gutarowska et al.

MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Valorisation of waste to yield recyclable composites of elemental sulfur and lignin

Menisha S. Karunarathna et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Durable, acid-resistant copolymers from industrial by-product sulfur and microbially-produced tyrosine

Timmy Thiounn et al.

RSC ADVANCES (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Durable Cellulose-Sulfur Composites Derived from Agricultural and Petrochemical Waste

Moira K. Lauer et al.

ADVANCED SUSTAINABLE SYSTEMS (2019)

添加到收藏夹

Article Polymer Science

Sulfur-Based Polymer Composites from Vegetable Oils and Elemental Sulfur: A Sustainable Active Material for Li-S Batteries

Alexander Hoefling et al.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2017)

添加到收藏夹

Article Polymer Science

Direct Access to Functional (Meth)Acrylate Copolymers Through Transesterification with Lithium Alkoxides

Carolin Fleischmann et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Laying Waste to Mercury: Inexpensive Sorbents Made from Sulfur and Recycled Cooking Oils

Max J. H. Worthington et al.

CHEMISTRY-A EUROPEAN JOURNAL (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

A sulfur-eugenol allyl ether copolymer: a material synthesized via inverse vulcanization from renewable resources and its application in Li-S batteries

Alexander Hoefling et al.

MATERIALS CHEMISTRY FRONTIERS (2017)

添加到收藏夹

Review Construction & Building Technology

Waterproof performance of concrete: A critical review on implemented approaches

Nasiru Zakari Muhammad et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

添加到收藏夹

Review Polymer Science

A Review of the Properties and Applications of Poly (Methyl Methacrylate) (PMMA)

Umar Ali et al.

POLYMER REVIEWS (2015)

添加到收藏夹

Review Chemistry, Physical

H2S-Selective Catalytic Oxidation: Catalysts and Processes

Xin Zhang et al.

ACS CATALYSIS (2015)

添加到收藏夹

Article Energy & Fuels

API Gravity, Sulfur Content, and Desulfurization of Crude Oil

A. Demirbas et al.

PETROLEUM SCIENCE AND TECHNOLOGY (2015)

添加到收藏夹

Article Construction & Building Technology

Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete

Louise K. Turner et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

The use of elemental sulfur as an alternative feedstock for polymeric materials

Woo Jin Chung et al.

NATURE CHEMISTRY (2013)

添加到收藏夹

Article Construction & Building Technology

Assessment of the durability of concrete from its permeation properties: a review

L Basheer et al.

CONSTRUCTION AND BUILDING MATERIALS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.