4.7 Article

Supersonically Sprayed Cobalt Titanate and PVDF for Flexible Piezoelectric Nanogenerators

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Engineering, Environmental

Piezoelectric energy harvesting and dissipating behaviors of polymer-based piezoelectric composites for nanogenerators and dampers

Wenzheng Chen et al.

Summary: Polymer-based piezoelectric composites (PPCs) possess excellent mechanical-vibrational energy harvesting and dissipating (EHD) capabilities. The combination of piezoelectric materials and polymer matrix enables the conversion of mechanical vibrations into electrical signals and the dissipation of energy as Joule heat. Differences in the shunt circuits used to simulate EHD abilities in PPCs depend on the presence of a dissipating resistance. This paper discusses the simulation of shunt circuits to examine the EHD behaviors of PPCs, presents commonalities and differences between these behaviors, and explores potential applications of PPCs in wearable nanogenerators and vibration attenuation systems.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Engineering, Manufacturing

Flexible piezoelectric generator based on PLLA/ZnO oriented fibers for wearable self-powered sensing

Menghan Xu et al.

Summary: In this study, PLLA/ZnO oriented fibers were prepared through orientation electrospinning for a piezoelectric generator, eliminating the need for polarization and stretching post-processes. The resulting composite fibers showed macroscopic orientation, molecular alignment, increased crystallinity, and a higher polar phase for PLLA. The generator exhibited significant and stable piezoelectric signals over 1000s, increasing the open-circuit voltage to 7.9V, nearly 4.6 times larger than that of the random neat device. The oriented fibers and ZnO-induced stress concentration contributed to improved piezoelectricity, as confirmed by simulations. Additionally, the generator successfully charged a 10μF capacitor up to 2V at 210s and illuminated a LED, demonstrating its potential as a wearable self-powered sensor for monitoring human movement and health.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2023)

Review Materials Science, Multidisciplinary

Recent Progress of Wearable Piezoelectric Pressure Sensors Based on Nanofibers, Yarns, and Their Fabrics via Electrospinning

Chuanwei Zhi et al.

Summary: This article comprehensively summarizes the recent progress in piezoelectric pressure sensors from electrospun nanofibers to fabrics, discusses strategies, designs, and mechanisms to enhance their properties, and explores the technical challenges and possible solutions for textile-level integration.

ADVANCED MATERIALS TECHNOLOGIES (2023)

Article Chemistry, Physical

Supersonically sprayed PVDF and ZnO flowers with built-in nanocuboids for wearable piezoelectric nanogenerators

Bhavana Joshi et al.

Summary: In this study, flexible piezoelectric nanogenerator devices were fabricated by supersonically spraying ZnOembedded PVDF composite films. The presence of ZnO significantly increased the beta-phase within PVDF, leading to enhanced generated charges. The effective piezoelectric coefficient and open-circuit voltage of the PVDF/ZnO composite were higher than those of pure PVDF, demonstrating the pivotal role of ZnO in increasing the beta-phase and improving the electromechanical performance. The energy harvesting capability of the composite was demonstrated using 33 light-emitting diodes.

NANO ENERGY (2023)

Review Chemistry, Multidisciplinary

Recent Advances in Organic and Organic-Inorganic Hybrid Materials for Piezoelectric Mechanical Energy Harvesting

Thangavel Vijayakanth et al.

Summary: This article comprehensively reviews the application of piezo- and ferro-electric materials based on organic molecules and organic-inorganic hybrids in mechanical energy harvesting. The article describes the characterization of the piezo- and ferroelectric properties of these materials and highlights the advantages they have over traditional materials. It also discusses the potential of peptide-based and other biomolecular materials as alternative options. The article concludes with an analysis of the current limitations and future prospects in this field of research.

ADVANCED FUNCTIONAL MATERIALS (2022)

Review Materials Science, Multidisciplinary

Self-charging supercapacitors for smart electronic devices: a concise review on the recent trends and future sustainability

Surjit Sahoo et al.

Summary: This review provides a summarized content on the research and development of self-charging supercapacitor power cells (SCSPCs) and emphasizes the importance of novel materials, device architecture, and performance metrics for the evolution of next-generation electronics applications. It also discusses the challenges in integrating energy conversion and storage devices into a single system.

JOURNAL OF MATERIALS SCIENCE (2022)

Article Nanoscience & Nanotechnology

Ultra-Stable and Durable Piezoelectric Nanogenerator with All-Weather Service Capability Based on N Doped 4H-SiC Nanohole Arrays

Linlin Zhou et al.

Summary: In this study, an ultra-stable piezoelectric nanogenerator (PENG) based on N doped 4H-SiC nanohole arrays (NHAs) is proposed for harvesting ambient energy under different temperature and humidity conditions. The simulation results show a relationship between nanohole diameter and piezoelectric performance. The assembled PENG exhibits a high short circuit current density and demonstrates all-weather service capability even after 50 days of treatment.

NANO-MICRO LETTERS (2022)

Article Materials Science, Multidisciplinary

Influence of Various Physiochemical Parameters of AFeO3 (A = Bi, Er, Ga, La, Sm, Y) Fillers on the Dielectric, Ferroelectric, Energy Storage, and Mechanical Energy Harvesting Performance of PVDF

Abhishek Sasmal et al.

Summary: This study investigates the effects of different perovskite ferrites as additives on the properties of PVDF-based composites. It is found that non-centrosymmetric fillers improve the output performance of PVDF more effectively compared to centrosymmetric fillers. Among them, the 5 wt% BiFeO3-loaded PVDF film (5BF) shows the best performance in various aspects and can be widely applied in real-life scenarios.

MACROMOLECULAR MATERIALS AND ENGINEERING (2022)

Article Chemistry, Physical

Multilayered Piezoelectric Nanogenerator Based on Lead-Free Poly(vinylidene fluoride)-(0.67BiFeO3-0.33BaTiO3) Electrospun Nanofiber Mats for Fast Charging of Supercapacitors

Sakti Prasanna Muduli et al.

Summary: This study demonstrates a polymer-based piezoelectric nanogenerator with a high power density. By using a flexible, multilayered structure and an optimized composite material, the device achieves improved voltage and current outputs.

ACS APPLIED ENERGY MATERIALS (2022)

Article Nanoscience & Nanotechnology

Piezoelectric Nanogenerators Based on Electrospun PVDF-Coated Mats Composed of Multilayer Polymer-Coated BaTiO3 Nanowires

Binbin Zhao et al.

Summary: In this study, high performance piezoelectric nanogenerators (PENGs) were prepared by surface-initiated polymerization of hyperbranched barium titanate nanowires with poly(methyl methacrylate) (PMMA). The PENG composed of poly(vinylidene fluoride) (PVDF) and core-double shell PMMA-coated hyperbranched BaTiO3 (BTO@HBP@PMMA) nanowires showed significantly improved output performance and durability. This study provides a new microstructure design for the fabrication of high performance PENGs.

ACS APPLIED NANO MATERIALS (2022)

Article Chemistry, Multidisciplinary

Bending-Insensitive Intrinsically Flexible Ultraviolet Encoding Devices Based on Piezoelectric Nanogenerator-Supplied Liquid Crystalline Polymer Fabrics

Xiaoxiong Zheng et al.

Summary: A bending-insensitive, self-powered, and intrinsically flexible UV detector has been developed using well-designed oriented composite fabrics comprising ionic liquid (IL)-containing liquid crystalline polymers (ILCPs) and piezoelectric poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] nanogenerators. The composite fabrics establish effective UV illuminance-internal stress-electric signal conversion through resistive and piezoelectric effects, with a fast response time of 190 ms.
Article Chemistry, Physical

Self-powered pacemaker based on all-in-one flexible piezoelectric nanogenerator

Yuanzheng Zhang et al.

Summary: Self-powered pacemakers with extended working time and reduced surgical risk hold promise for future clinical translation. This study presents a self-powered pacemaker based on an all-in-one piezoelectric nanogenerator, capable of valid myocardium pacing and conduction system pacing. Experimental results demonstrate successful pacing in a canine model at different pacing sites. This work provides a new idea for developing self-powered pacemakers with multifunctional features and integrated devices for in vivo diagnosis and treatment.

NANO ENERGY (2022)

Article Physics, Applied

Magnetically tunable enhanced performance of CoFe2O4-PVDF nanocomposite film-based piezoelectric nanogenerator

Arun Mondal et al.

Summary: In this study, a flexible piezoelectric nanogenerator with tunable output power using a PVDF-CFO nanocomposite film was prepared. By incorporating ferromagnetic CFO nanoparticles into the PVDF matrix, the ferroelectric beta phase fraction of PVDF was enhanced, providing magnetic tunability to the PENG device. The output power of the PENG increased with the application of an external magnetic field, attributed to the decrease in resistance of the nanocomposite film.

APPLIED PHYSICS LETTERS (2022)

Review Chemistry, Physical

A review of flexible lead-free piezoelectric energy harvester

Ruifeng Yue et al.

Summary: Piezoelectric nanogenerator is a promising device that converts mechanical energy into electrical energy. The development of lead-free piezoelectric nanogenerator is necessary due to its less toxic nature. Materials such as ZnO and perovskite have been widely studied for their excellent piezoelectric properties and environmental friendliness. This review discusses the recent achievements and future possibilities of lead-free flexible energy harvesting devices, including stretchable piezoelectric nanowire and nanocomposite nanogenerators.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Instruments & Instrumentation

Analysis of electrospinning and additive effect on β phase content of electrospun PVDF nanofiber mats for piezoelectric energy harvester nanogenerators

Kamil Oflaz et al.

Summary: Improving the piezoelectric properties of PVDF by using additives, a composite PVDF nanofiber mat with the highest beta phase concentration was produced. It demonstrated a higher output voltage than pure PVDF under equal electrospinning conditions.

SMART MATERIALS AND STRUCTURES (2022)

Article Chemistry, Physical

Biocompatible CaTiO3-PVDF composite-based piezoelectric nanogenerator for exercise evaluation and energy harvesting

Swati Panda et al.

Summary: A polymeric composite material based on calcium titanate was developed as a piezoelectric nanogenerator for energy harvesting. This material showed improved electrical performance and biocompatibility. The device could collect signals generated from skipping exercises and monitor human health using digital signal processing techniques and artificial neural networks.

NANO ENERGY (2022)

Review Chemistry, Multidisciplinary

Piezoelectric nanogenerators for personalized healthcare

Weili Deng et al.

Summary: The development of flexible piezoelectric nanogenerators has made significant progress in the past decade and is crucial for future personalized healthcare technologies. These devices offer efficient energy conversion, easy implementation, and self-powering capabilities, enabling innovative healthcare applications in sensing, therapy, and energy harvesting. This article provides a comprehensive review of piezoelectric nanogenerators in personalized healthcare, covering the fundamental physics, material engineering, device design, and various applications in energy harvesting, sensing, and therapeutics. The challenges and opportunities of utilizing these nanogenerators for self-powered bioelectronics and personalized healthcare are also discussed in detail.

CHEMICAL SOCIETY REVIEWS (2022)

Article Crystallography

Piezoelectric Nanogenerator Based on Lead-Free Flexible PVDF-Barium Titanate Composite Films for Driving Low Power Electronics

Manisha Sahu et al.

Summary: The study focuses on developing a piezoelectric nanogenerator based on flexible polymer-ceramic composite films and finds that the introduction of BTO particles can enhance the dielectric constant and polarization of the composite film. By strategies such as internal polarization amplification, the output of single-layered devices can be increased, and the piezoelectric nanogenerator with 10 wt% BTO-PVDF CF gives a high electrical output.

CRYSTALS (2021)

Article Nanoscience & Nanotechnology

Supersonically Sprayed Washable, Wearable, Stretchable, Hydrophobic, and Antibacterial rGO/AgNW Fabric for Multifunctional Sensors and Supercapacitors

Taegun Kim et al.

Summary: In this study, reduced graphene oxide (rGO) and silver nanowires (AgNWs) were supersonically sprayed onto a fabric to create a washable, stretchable, and wearable fabric with functionalities including temperature sensing, heating, supercapacitor capabilities, and antibacterial features. The multifunctional fabric can monitor external stimuli and reduce infection risks from airborne viruses.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Materials Science, Composites

Influence of oleylamine-functionalized boron nitride nanosheets on the crystalline phases, mechanical and piezoelectric properties of electrospun PVDF nanofibers

Madeshwaran Sekkarapatti Ramasamy et al.

Summary: This study reported a fabrication method for high-performance PVDF-based piezoelectric composites comprising PVDFNFs and OLABN, which showed significantly enhanced electrical response, Young's modulus, and ultimate tensile strength. The composites can achieve rapid piezoelectric outputs and a substantial increase in output power density.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Review Chemistry, Physical

Recent developments in self-powered smart chemical sensors for wearable electronics

Aaryashree et al.

Summary: The future of electronics technology will be primarily based on wearable sensing systems, with wearable electronic sensors that do not require external power sources being crucial for portable and mobile applications. This review article presents the recent progress of wearable self-powered smart chemical sensors systems, as well as an overview of various energy conversion and storage technologies for self-powered devices.

NANO RESEARCH (2021)

Article Materials Science, Composites

A hybrid piezoelectric composite flexible film based on PVDF-HFP for boosting power generation

Ayda Bouhamed et al.

Summary: The study focuses on developing a high performance flexible nanogenerator based on hybrid piezoelectric composite, with improved piezoelectric performance by doping with silver nanoparticles. Dimethyl formamide (DMF) solvent is used to enhance the rate of crystalline phases, resulting in improved output voltage and power of the nanogenerator.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Experimental and theoretical studies on the formation of pure β-phase polymorphs during fabrication of polyvinylidene fluoride membranes by cyclic carbonate solvents

Norafiqah Ismail et al.

Summary: The use of green solvents for polyvinylidene fluoride (PVDF) membrane fabrication was investigated in this study. Membranes fabricated in ethylene carbonate (EC) or propylene carbonate (PC) yielded exclusively the beta-phase product, while butylene carbonate (BC) led to a mixture of alpha and beta phase material. The PVDF membrane formed in EC exhibited the highest porosity and pure water permeability, showing promising results in direct contact membrane distillation (DCMD) for permeate flux and salt rejection. These findings suggest that large-scale production of piezoelectric PVDF membranes using green solvents is feasible.

GREEN CHEMISTRY (2021)

Article Physics, Applied

Piezoresponse amplitude and phase quantified for electromechanical characterization

Sabine M. Neumayer et al.

JOURNAL OF APPLIED PHYSICS (2020)

Article Materials Science, Multidisciplinary

Electric field distribution in porous piezoelectric materials during polarization

German Martinez-Ayuso et al.

ACTA MATERIALIA (2019)

Article Chemistry, Multidisciplinary

Supersonically Sprayed Zn2SnO4/SnO2/CNT Nanocomposites for High-Performance Supercapacitor Electrodes

Edmund Samuel et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Nanoscience & Nanotechnology

Wearable, Stretchable, Transparent All-in-One Soft Sensor Formed from Supersonically Sprayed Silver Nanowires

Hong Seok Jo et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Review Polymer Science

The promise of piezoelectric polymers

Timothy D. Usher et al.

POLYMER INTERNATIONAL (2018)

Review Chemistry, Multidisciplinary

A retrospect on the role of piezoelectric nanogenerators in the development of the green world

Ani Melfa M. Roji et al.

RSC ADVANCES (2017)

Article Materials Science, Multidisciplinary

Strain engineering of piezoelectric properties of strontium titanate thin films

F. Sun et al.

JOURNAL OF MATERIALS SCIENCE (2014)

Review Polymer Science

Electroactive phases of poly(vinylidene fluoride): Determination, processing and applications

P. Martins et al.

PROGRESS IN POLYMER SCIENCE (2014)

Article Materials Science, Multidisciplinary

Supersonic nanoblowing: a new ultra-stiff phase of nylon 6 in 20-50 nm confinement

Suman Sinha-Ray et al.

JOURNAL OF MATERIALS CHEMISTRY C (2013)

Article Physics, Applied

Piezoresponse force microscopy (PFM)

Elisabeth Soergel

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2011)

Article Materials Science, Ceramics

Interfacial polarization in piezoelectric fibre-polymer composites

M. Arous et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2007)

Article Materials Science, Characterization & Testing

Effect of tensile strain rate and elongation on crystalline structure and piezoelectric properties of PVDF thin films

Behzad Mohammadi et al.

POLYMER TESTING (2007)

Article Multidisciplinary Sciences

Piezoelectric nanogenerators based on zinc oxide nanowire arrays

ZL Wang et al.

SCIENCE (2006)