☆ 4.7 Article

Rate controlling deformation mechanisms in SS316L stainless steel manufactured using laser powder bed fusion technique

INTERNATIONAL JOURNAL OF PLASTICITY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

On the origin of the strain hardening mechanisms of Ni20Cr alloy manufactured by laser powder bed fusion

Shubham Sanjay Joshi et al.

Summary: In this article, the basic strain hardening mechanisms of AM (LPBF) alloys of a theoretically monophasic Ni20Cr alloy manufactured by laser powder bed fusion are investigated. The microstructure and tensile mechanical behavior of the alloys are analyzed and compared with conventionally manufactured Ni20Cr alloy. The results show that the LPBF samples exhibit an increase in yield stress due to effective stress and backstress modification. Additionally, the strain hardening mechanisms are modified for LPBF manufactured samples compared to cast ones. The study also highlights the contribution of specific LPBF microstructure features to stress and strain hardening.

INTERNATIONAL JOURNAL OF PLASTICITY (2023)

添加到收藏夹

Article Engineering, Mechanical

Dependence of microstructures on fatigue performance of polycrystals: A comparative study of conventional and additively manufactured 316L stainless steel

Luqing Cui et al.

Summary: The fatigue properties and microstructural evolution of 316L stainless steel manufactured by laser powder bed fusion were studied and compared with the wrought counterpart. The as-built L-PBF 316LSS exhibited a unique microstructure with high serrated grain boundaries, bimodal grain structure, nano-precipitates, solidification cell structures, and chemical segregations. The hardness and fatigue resistance of L-PBF 316LSS were significantly improved compared to the wrought solution annealed samples due to its unique microstructural characteristics and enhanced planar slip.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Engineering, Mechanical

Dislocation density in cellular rapid solidification using phase field modeling and crystal plasticity

Matti Lindroos et al.

Summary: A coupled phase field and crystal plasticity model is used to analyze the formation of dislocation structures and residual stresses during the rapid solidification of additively manufactured 316L stainless steel. The study reveals the significant influence of microsegregation related to the intra-grain cellular microstructure on the microstructure and mechanical properties.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

A comparative study of additive manufactured and wrought SS316L: Pre-existing dislocations and grain boundary characteristics

Fengxia Wei et al.

Summary: This study compares the mechanical properties of additively manufactured (AM) SS316L and conventionally manufactured (CM) SS316L and finds that AM SS316L has more dislocations and low angle grain boundaries, resulting in different strengthening mechanisms. Furthermore, the distribution of coincident site lattice boundaries is more diverse in AM samples. Additionally, the behavior of AM grain boundaries under tensile strain is significantly different from CM samples.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Deformation faulting and dislocation-cell refinement in a selective laser melted 316L stainless steel

Feng He et al.

Summary: The selective laser melted (SLM) 316L stainless steel (316L SS) has superior tensile ductility and doubled yield strength compared to its wrought counterpart. The improved yield strength is attributed to unique cellular substructures featured by Cr/Mo-segregation and trapped dislocations. The excellent ductility is mainly understood from deformation twinning and two newly discovered deformation mechanisms, deformation faulting and dislocation cell refinement, which dominate the whole tensile deformation significantly.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Engineering, Mechanical

Mechanical, microstructural and in-situ neutron diffraction investigations of equi-biaxial Bauschinger effects in an interstitial-free DC06 steel

Markus Haertel et al.

Summary: This research investigates the Bauschinger effects in sheet metal DC06 under equi-biaxial loading conditions. The results show that the material exhibits distinct Bauschinger effects when subjected to equi-biaxial load path changes, which differ from similar observations under uniaxial loading. These effects can be explained by considering the evolution of dislocation densities and the formation of substructures, as well as the influence of residual stresses.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Engineering, Mechanical

Heterogeneous slip localization in an additively manufactured 316L stainless steel

C. Bean et al.

Summary: Additively manufactured 316L stainless steels exhibit higher yield strength due to their unique microstructural features. Investigation of plastic localization at the sub-grain scale reveals significant heterogeneous slip localization in additively manufactured 316L stainless steels compared to conventionally manufactured ones.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Combinatorial synchrotron diffraction-constitutive modelling-crystal plasticity simulation framework for direct metal laser sintered AlSi10Mg alloy

Roopam Jain et al.

Summary: Combinatorial synchrotron and electron backscatter diffraction experiments, constitutive modelling, and fast Fourier transform crystal plasticity simulations were used to study the mechanical behavior and microstructure of direct metal laser sintered AlSi10Mg alloy. Heat treatment was found to change the microstructure and affect the strength and ductility of the alloy. Computational simulations successfully captured the stress and strain distribution, providing valuable insights into the mechanical behavior.

MATERIALIA (2022)

添加到收藏夹

Article Engineering, Mechanical

Effect of annealing treatment on microstructure evolution and deformation behavior of 304 L stainless steel made by laser powder bed fusion

Hongzhuang Zhang et al.

Summary: This paper investigates the microstructural evolution of laser powder bed fused 304 L austenitic stainless steel after stress-relieving annealing and solution annealing. The results show the migration of dislocations and the formation of subgrain boundaries during annealing, leading to changes in strength and ductility. The study also reveals the distortion networks and misorientation ranges in the samples. Tensile deformation results in deformation twins in different oriented grains, dependent on the annealing conditions.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Understanding orientation-dependent plasticity in laser beam powder bed fusion stainless steel through crystal plasticity modelling

Xinyu Yang et al.

Summary: In this study, single-crystal-like stainless steel 316L was produced using the PBF-LB process. Tensile responses in different crystallographic directions showed significantly different strength ratios compared to the standard FCC alloy. A multi-scale crystal plasticity modelling methodology was developed to simulate and understand this unique orientation-dependent plastic deformation behavior.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion

Thomas Voisin et al.

Summary: The rapid solidification cellular structures in 316L austenitic stainless steels fabricated by laser powder-bed-fusion were found to have specific crystallographic orientations in cell walls, which act as barriers to dislocation movement and contribute to material strengthening. Additionally, oxide precipitates confined inside cell walls also enhance the material's strength. Overall, the understanding of these intrinsic characteristics and strengthening mechanisms can help improve the material's thermal stability and high strength.

ACTA MATERIALIA (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Heterogeneous Aspects of Additive Manufactured Metallic Parts: A Review

G. M. Karthik et al.

Summary: Metal additive manufacturing (MAM) is a new technology for producing complex metallic parts, and understanding the relationship between thermal cycles and microstructures in MAM parts is crucial. This review covers the evolution of microstructures in MAM parts and discusses residual stresses, anisotropy, and the effects of post-MAM heat treatment.

METALS AND MATERIALS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Revealing relationships between microstructure and hardening nature of additively manufactured 316L stainless steel

Luqing Cui et al.

Summary: The relationship between microstructures and hardening nature of laser powder bed fused (L-PBF) 316 L stainless steel has been studied, showing that the hardness of the alloy is predominantly governed by GNDs. During annealing treatments, the migration of GNDs and the decrease of SSD density play important roles in the hardness variation of the material.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Engineering, Mechanical

The microstructural effects on the mechanical response of polycrystals: A comparative experimental-numerical study on conventionally and additively manufactured metallic materials

S. Amir H. Motaman et al.

Summary: Metal additive manufacturing provides a unique opportunity to explore extreme microstructural regimes and their effects on the mechanical properties of polycrystals. This study investigated the influence of different processing conditions on microstructural features and the resulting mechanical response through experimentation and simulation. The findings offer insights into the primary microstructural effects on the mechanical behavior of polycrystals, particularly in highly diverse microstructural regimes typically obtained through metal additive manufacturing.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The significance of spatial length scales and solute segregation in strengthening rapid solidification microstructures of 316L stainless steel

Tatu Pinomaa et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Engineering, Mechanical

Three-dimensional maps of geometrically necessary dislocation densities in additively manufactured Ni-based superalloy IN718

Wyatt A. Witzen et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting

Matjaz Godec et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Evolution of cellular dislocation structures and defects in additively manufactured austenitic stainless steel under ion irradiation

Shilei Li et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Engineering, Mechanical

Stress relaxation and the cellular structure-dependence of plastic deformation in additively manufactured AlSi10Mg alloys

Zan Li et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

添加到收藏夹

Article Chemistry, Physical

On the Strength of a 316L-Type Stainless Steel Subjected to Cold or Warm Rolling Followed by Annealing

Marina Odnobokova et al.

MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

The origin of high-density dislocations in additively manufactured metals

Ge Wang et al.

MATERIALS RESEARCH LETTERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L

K. M. Bertsch et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Engineering, Mechanical

Structural representation of additively manufactured 316L austenitic stainless steel

C. A. Bronkhorst et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Engineering, Mechanical

Tensile properties, strain rate sensitivity, and activation volume of additively manufactured 316L stainless steels

Zan Li et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure, strain-rate sensitivity, work hardening, and fracture behavior of laser additive manufactured austenitic and martensitic stainless steel structures

F. Khodabakhshi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

An analysis of phase stresses in additively manufactured 304L stainless steel using neutron diffraction measurements and crystal plasticity finite element simulations

Reeju Pokharel et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new phenomenological approach for modeling strain hardening behavior of face centered cubic materials

Sumeet Mishra et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strengthening mechanisms in directed energy deposited austenitic stainless steel

Thale R. Smith et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Chemistry, Physical

Additively manufactured hierarchical stainless steels with high strength and ductility

Y. Morris Wang et al.

NATURE MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermal activation parameters of plastic flow reveal deformation mechanisms in the CrMnFeCoNi high-entropy alloy

G. Laplanche et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Rate sensitive behavior of obstacles in age hardenable aluminum alloys

Sumeet Mishra et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dislocation network in additive manufactured steel breaks strength-ductility trade-off

Leifeng Liu et al.

MATERIALS TODAY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stress relaxation behavior of an aluminium magnesium silicon alloy in different temper condition

Sumeet Mishra et al.

MECHANICS OF MATERIALS (2018)

添加到收藏夹

Article Engineering, Mechanical

Modeling and simulation framework for dynamic strain localization in elasto-viscoplastic metallic materials subject to large deformations

H. M. Mourad et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing

M. S. Pham et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments

Naoki Takata et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the strain rate-dependent deformation mechanism of CoCrFeMnNi high-entropy alloy at liquid nitrogen temperature

Jongun Moon et al.

MATERIALS RESEARCH LETTERS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures

R. Fritz et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermal activation mechanisms and Labusch-type strengthening analysis for a family of high-entropy and equiatomic solid-solution alloys

Zhenggang Wu et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

FIT2D: a multi-purpose data reduction, analysis and visualization program

A. P. Hammersley

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity

Verena Maier et al.

SCRIPTA MATERIALIA (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Activation volume and density of mobile dislocations in hydrogen-charged iron

Shuai Wang et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strain rate sensitivity and deformation kinetics of ECAPed aluminium over a wide range of strain rates

Tao Suo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ TEM observations of reverse dislocation motion upon unloading in tensile-deformed UFG aluminium

Frederic Mompiou et al.

ACTA MATERIALIA (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel precipitate-microstructural architecture developed in the fabrication of solid copper components by additive manufacturing using electron beam melting

D. A. Ramirez et al.

ACTA MATERIALIA (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of strain rate on quasistatic tensile flow behaviour of solution annealed 304 austenitic stainless steel at room temperature

Amrita Kundu et al.

JOURNAL OF MATERIALS SCIENCE (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Toward a physical model for strain hardening in fcc crystals

Ladislas Kubin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Engineering, Mechanical

An experimental and numerical study of the localization behavior of tantalum and stainless steel

CA Bronkhorst et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2006)

添加到收藏夹

Article Thermodynamics

THERMO-CALC & DICTRA, computational tools for materials science

JO Andersson et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.