相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Sustainable fabrication of polypropylene-postconsumer cotton composite materials: circularity, characterization, mechanical testing, and tribology
A. Hussain et al.
MATERIALS TODAY SUSTAINABILITY (2023)
Investigation on optimization of preparation process parameters of GO-CF/SMP composites prepared by VIHPS
Yuqin Ma et al.
JOURNAL OF MATERIALS SCIENCE (2022)
Mechanical and Thermal Analysis of Cissus Quadrangularis Stem Fiber/Epoxy Composite with Micro-Red Mud Filler Composite for Structural Application
V. C. Sathish Gandhi et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2022)
A new insight into utilization of red mud in poly(vinyl chloride) composites via surface modification and toughening modulation to attain performance optimization
Chong Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Utilization of hazardous red mud in silicone rubber/MWCNT nanocomposites for high performance electromagnetic interference shielding
Rishu Prasad et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Reuse of red mud in magnesium potassium phosphate cement: Reaction mechanism and performance optimization
Shanliang Ma et al.
JOURNAL OF BUILDING ENGINEERING (2022)
A review of the sustainable utilisation of red mud and fly ash for the production of geopolymer composites
Shaker M. A. Qaidi et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Recycling red mud to develop a competitive desulfurization flux for Kanbara Reactor (KR) desulfurization process
Kang-Ho Bang et al.
JOURNAL OF HAZARDOUS MATERIALS (2022)
Effects of functional intercalation and surface modification on the flame retardant performance of EVA/LDHs composites
Long Li et al.
POLYMERS & POLYMER COMPOSITES (2021)
CO2 mineral sequestration by using blast furnace slag: From batch to continuous experiments
Shan Ren et al.
ENERGY (2021)
Balancing the toughness and strength in polypropylene composites
Kamyar Shirvanimoghaddam et al.
COMPOSITES PART B-ENGINEERING (2021)
Distribution states of graphene in polymer nanocomposites: A review
Premika Govindaraj et al.
COMPOSITES PART B-ENGINEERING (2021)
Characteristic, hazard and iron recovery technology of red mud-A critical review
Xiao Liu et al.
JOURNAL OF HAZARDOUS MATERIALS (2021)
The physiochemical alteration of flax fibers structuring components after different scouring and bleaching treatments
Jinhua Ding et al.
INDUSTRIAL CROPS AND PRODUCTS (2021)
Mechanism of magnetizing the Bayer red mud and meanwhile improving the cementitious activity of its tailings by using biomass
Yaguang Wang et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Effect of Nanofillers on Tribological Properties of Polymer Nanocomposites: A Review on Recent Development
Jia Xin Chan et al.
POLYMERS (2021)
Experimental Determination, Modelling and Prediction of Sliding Wear of Hybrid Polymer Composites Using RSM and Fuzzy Logic
Agnivesh Kumar Sinha et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2021)
Incorporation of Xuan-paper waste residue in red mud/waste polyethylene composites
Chen Chen et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Recent advancements of plant-based natural fiber-reinforced composites and their applications
Mi Li et al.
COMPOSITES PART B-ENGINEERING (2020)
Thermal aging, physico-mechanical, dynamic mechanical properties of chlorinated polyethylene/red mud composites
Liyan Qiu et al.
POLYMER COMPOSITES (2020)
Potential use of industrial waste-red mud in developing hybrid composites: A waste management approach
S. Vigneshwaran et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Composite plates utilizing dealkalized red mud, acid leaching slag and dealkalized red mud-fly ash: Preparation and performance comparison
Xinke Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Multicomponent red mud-polyester composites for neutron shielding application
Sapana Guru et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Utilization of red mud in road base and subgrade materials: A review
Emile Mukiza et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
Review on mechanical properties evaluation of pineapple leaf fibre (PALF) reinforced polymer composites
Santosh Sadashiv Todkar et al.
COMPOSITES PART B-ENGINEERING (2019)
Study of Tribological Properties of Nano-Sized Red Mud Particle-Reinforced Polyester Composites
S. Richard et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)
Performance evaluation-PET resin composite composed of red mud, fly ash and silica fume
Gurpreet Singh et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Experimental determination and modelling of the mechanical properties of hybrid abaca-reinforced polymer composite using RSM
Agnivesh Kumar Sinha et al.
POLYMERS & POLYMER COMPOSITES (2019)
Preparation and characterization of a red mud-based road base material: Strength formation mechanism and leaching characteristics
Emile Mukiza et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Synergic effects of electrolytic manganese residue-red mud-carbide slag on the road base strength and durability properties
Yuliang Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A review of important considerations in the compression molding process of short natural fiber composites
Jamiluddin Jaafar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Fabrication and performance of a polyurethane hybrid composite with waste red mud
Zhengpeng Yang et al.
POLYMER COMPOSITES (2019)
Graphene-based microwave absorbing composites: A review and prospective
Fanbin Meng et al.
COMPOSITES PART B-ENGINEERING (2018)
Study of the implementation of waste wood, plastics and polystyrenes for various applications in the building industry
Marius Chanhoun et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Feasibility of co-reduction roasting of a saprolitic laterite ore and waste red mud
Xiao-ping Wang et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2018)
Characterization and properties of natural fiber polymer composites: A comprehensive review
M. R. Sanjay et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Mechanical and thermal properties of modified red mud-reinforced phenolic foams
Jianguo Liu et al.
POLYMER INTERNATIONAL (2018)
Complementation in the composition of steel slag and red mud for preparation of novel ceramics
Yan-bing Zong et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2018)
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
S. M. Al-Salem et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2017)
The use of red mud as an immobiliser for metal/metalloid-contaminated soil: A review
Yumei Hua et al.
JOURNAL OF HAZARDOUS MATERIALS (2017)
Effects of red mud on rheological, crystalline, and mechanical properties of red mud/PBAT composites
Leipeng Liu et al.
POLYMER COMPOSITES (2016)
Effects of water absorption on Napier grass fibre/polyester composites
M. Haameem J. A. et al.
COMPOSITE STRUCTURES (2016)
Effect of humidity during manufacturing on the interfacial strength of non-pre-dried flax fibre/unsaturated polyester composites
C. A. Fuentes et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Effect of red mud waste filler on mechanical and thermal properties of amine functional aniline furfuraldehyde condensate (AFAFFC) modified epoxy composite
B. C. Samanta et al.
PIGMENT & RESIN TECHNOLOGY (2016)
Effect of red mud filler on mechanical and buckling characteristics of coir fibre-reinforced polymer composite
Nikunj V. Rachchh et al.
IRANIAN POLYMER JOURNAL (2015)
Effect of Preparation Temperature on the Aging Properties of Waste Polyethylene Modified Asphalt
Changqing Fang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)
Polymer nanocomposites from modified clays: Recent advances and challenges
Moumita Kotal et al.
PROGRESS IN POLYMER SCIENCE (2015)
Mechanical Properties of Vinylester/Glass and Polyester/Glass Composites Fabricated by Resin Transfer Molding and Hand Lay-Up
T. S. Roopa et al.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2015)
Influence of redmud on the mechanical, damping and chemical resistance properties of banana/polyester hybrid composites
V. Arumuga Prabu et al.
MATERIALS & DESIGN (2014)
Selective wetting and dispersion of filler in rubber composites under influence of processing and curing additives
H. H. Le et al.
POLYMER (2014)
Green Polymer Chemistry and Bio-based Plastics: Dreams and Reality
Rolf Muelhaupt
MACROMOLECULAR CHEMISTRY AND PHYSICS (2013)
Characteristics of kenaf fibre/epoxy composites subjected to thermal degradation
Z. N. Azwa et al.
POLYMER DEGRADATION AND STABILITY (2013)
Effect of red mud on the mechanical properties of banana/polyester composites using design of experiments
V. Arumuga Prabu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2013)
Thermogravimetric analysis of anthracite and waste plastics by iso-conversional method
Shan Ren et al.
THERMOCHIMICA ACTA (2013)
Production of pig iron from red mud waste fines using thermal plasma technology
K. Jayasankar et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2012)
The effect of processing conditions on the morphology, thermomechanical, dielectric, and piezoelectric properties of P(VDF-TrFE)/BaTiO3 composites
Sara Dalle Vacche et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Physical and Chemical Properties of Sintering Red Mud and Bayer Red Mud and the Implications for Beneficial Utilization
Ping Wang et al.
MATERIALS (2012)
Effect of Red Mud and Copper Slag Particles on Physical and Mechanical Properties of Bamboo-Fiber-Reinforced Epoxy Composites
Sandhyarani Biswas et al.
ADVANCES IN MECHANICAL ENGINEERING (2012)
Review of the mechanical properties of carbon nanofiber/polymer composites
Mohammed H. Al-Saleh et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Development and Characterization of Novel Modified Red Mud Nanocomposites Based on Poly(hydroxy ether) of Bisphenol A
A. H. Bhat et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Red mud/polypropylene composite with mechanical and thermal properties
Yihe Zhang et al.
JOURNAL OF COMPOSITE MATERIALS (2011)
Preparation of graphene/poly(vinyl alcohol) nanocomposites with enhanced mechanical properties and water resistance
Jingchao Wang et al.
POLYMER INTERNATIONAL (2011)
A comparative study on erosion characteristics of red mud filled bamboo-epoxy and glass-epoxy composites
Sandhyarani Biswas et al.
MATERIALS & DESIGN (2010)
Contribution of physico-chemical properties of interfaces on dispersibility, adhesion and flocculation of filler particles in rubber
Klaus Werner Stoeckelhuber et al.
POLYMER (2010)
Effect of modifier and filler concentration on properties of epoxy-red mud waste composite
Bidhan Samanta et al.
PIGMENT & RESIN TECHNOLOGY (2009)
Mechanical and dynamic analysis of poly (Vinyl alcohol)-modified inorganic filler composite
A. H. Bhat et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2008)
Mechanical Properties of Cost-Effective Polypropylene Composites Filled With Red-Mud Particles
A. Akinci et al.
POLYMERS & POLYMER COMPOSITES (2008)
Characterization of red mud derived from a combined Bayer Process and bauxite calcination method
Yong Liu et al.
JOURNAL OF HAZARDOUS MATERIALS (2007)
Synthesis and characterization of red mud/polyaniline composites:: Electrical properties and thermal stability
Ayseguel Goek et al.
EUROPEAN POLYMER JOURNAL (2007)
Morphology prediction of ternary polypropylene composites containing elastomer and calcium carbonate nanoparticles filler
C. G. Ma et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Structural and thermal characterization of poly(2-chloroaniline)/red mud nanocomposite materials
A Gök et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Improvement of red mud polymer-matrix nanocomposites by red mud surface treatment
SJ Park et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2005)
Influence of powder surface treatment on the dispersion behavior of silica into polymeric materials
A Scurati et al.
RUBBER CHEMISTRY AND TECHNOLOGY (2002)
Effect of acidic surface treatment of red mud on mechanical interfacial properties of epoxy/red mud nanocomposites
SJ Park et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2002)